Polestar 2

2023 Polestar 2 Climate Controls for Passenger Compartment Owner’s Manual
Contents hide
1 2023 Polestar 2 Climate controls for the passenger compartment
2 Activating and deactivating air conditioning
3 Activating and deactivating recirculation
4 Activating and deactivating the recirculation timer setting
5 Activating auto climate control
6 Adjusting air distribution
7 Setting the blower speed for the front seats
8 Setting the temperature for the front seats
9 Synchronize temperature
9.1 Deactivating synchronization of temperature
9.2 Reset synchronized temperature

2023 Polestar 2 Climate controls for the passenger compartment

Activating and deactivating air conditioning

The air conditioning cools and dehumidifies incoming air as needed.

When the air conditioning is activated, it will be switched on and off automatically by the climate system as needed.

  • Open Climate view in the center display by swiping upwards in Home view.
  • Tap the air conditioning button.

>The air conditioning is activated/deactivated, which is indicated by a symbol at the bottom of the display in the climate bar.

NOTE

For optimum function of the air conditioning, close all side windows.

NOTE

The air conditioning cannot be activated when the fan speed is set to Off.

Activating and deactivating recirculation

The climate system’s recirculation function helps shut out smog, smoke, exhaust fumes, etc. by reusing the air in the passenger compartment.
  • Open Climate view in the center display by swiping upwards in the Home view.
  • Tap the button for air recirculation.

> The air circulation is activated/deactivated and the button lights up/goes out.

IMPORTANT

If the air in the vehicle is recirculated too long, there is a risk of fogging on the inside of the windows.

NOTE

Recirculation cannot be activated when the max defroster is on.

NOTE

If the system’s air quality sensors detect contaminants in the outside air, the air intake closes and air circulation activates automatically.

Activating and deactivating the recirculation timer setting

The climate system’s recirculation function helps shut out smog, smoke, exhaust fumes, etc. by reusing the air in the passenger compartment.
When the recirculation timer is activated, air recirculation will switch off automatically after 20 minutes.
  • Open Climate view in the center display by swiping upwards in Home view.
  • Tap Settings in the Climate view.
  • Tap the desired setting under the Recirculation timer to activate/deactivate the recirculation timer.

Activating auto climate control

If auto climate control is activated, several climate system functions are controlled automatically.
  • Open Climate view in the center display by swiping upwards in Home view.
  • Tap or press and hold AUTO.
    • Tap – air recirculation, air conditioning and air distribution are controlled automatically.
    • Press and hold – air recirculation, air conditioning and air distribution are controlled automatically. Temperature and blower speed are changed to standard settings: 22 °C (72 °F) and speed 3.

> Auto climate mode is activated and the button lights up.

NOTE

It is possible to change the temperature and blower speed without deactivating automatic climate control. Automatic climate control is deactivated when the air distribution is changed manually or when the max defroster is activated.

Adjusting air distribution

Air distribution can be adjusted manually if needed.
  • Open Climate view in the center display by swiping upwards in the Home view.

  • The air distribution buttons in Climate view are located in the center around the AUTO button, from the top down:

    • Air distribution – windshield defrost vents
    • Air distribution – dashboard and center console air vents
    • Air distribution – floor air vents

    Tap one or more air distribution buttons to open/close the airflow for that vent.

> The air distribution changes and the buttons will light up or go out.

> If all air distribution buttons are deselected in manual mode, the climate control system will revert to automatic mode.

Setting the blower speed for the front seats

The blower can be set to several different automatically controlled speeds for the front seat.
  • Open Climate view in the center display by swiping upwards in the Home view.
  • Tap the desired blower speed: OFF, 1–5or MAX.

> The blower speed will be changed and the set speed will light up.

IMPORTANT

The air conditioning will not engage if the blower is turned off completely, which may cause fogging on the inside of the windows.

NOTE

The climate system automatically adapts airflow as needed within the set blower speed, which means that airflow speed may vary slightly within the same blower speed.

Setting the temperature for the front seats

The temperature can be set to the desired number of degrees for the front seat climate zones.

  • Tap the temperature button in the middle of the climate bar in the center display to open the control.

  • Drag the control to the desired temperature.

> The temperature will be set and the button will display the new temperature.

NOTE

Heating/cooling cannot be accelerated by choosing a higher/lower temperature than the desired temperature.

Synchronize temperature

By default, the temperature in the vehicle’s various climate zones is synchronized with the set temperature for the driver’s side, but it is possible to deactivate the synchronization and set the temperature separately for the different climate zones.

Deactivating synchronization of temperature

  • Tap the temperature button in the middle of the climate bar in the center display to open the control.
  • Tap the synchronization button above the temperature control.

> The temperature can now be set separately for the individual climate zones. The set temperature is now shown separately on the driver’s and passenger’s sides in the climate bar instead of only in the middle.

Reset synchronized temperature

  • Tap the driver’s or passenger side temperature button in the center display’s climate bar to open the control.
  • Tap the synchronization button above the temperature control.

> The temperature for all zones in the vehicle is synchronized with the set temperature on the driver’s side
Automotive Solutions

Leave a Comment
Share
Published by
Automotive Solutions
Tags: 20232023 Polestar2023 Polestar 2blownfuseClimate controls for passenger compartmentPolestarPolestar 2
3 years ago

Recent Posts

VW Jetta Engine Fuse Box Diagram

Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…

8 months ago

VW Jetta Passenger Fuse Box Diagram

Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…

8 months ago

2023 Ford F-150 Lightning Fuse Box Diagram

Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…

2 years ago

2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner’s Manual

2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…

2 years ago

2023 Land Rover Range Rover Evoque Exiting The Vehicle Owners Manual

2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…

2 years ago

2023 Land Rover Range Rover Evoque Front Seats Owners Manual

2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…

2 years ago