Jack
- Use a jack designed for the vehicle. If your vehicle is provided with a jack, or you have purchased one as a spare part, this jack is intended to be used only in temporary situations for short periods of time, such as when changing wheels in the event of a flat tire. If the vehicle needs to be lifted more frequently or for a prolonged period, using a garage jack or hoist is recommended. Always follow this device’s instructions for use.
- When the jack is not being used, it should be stowed in the foam block in the frunk. The jack needs to be cranked into the correct position in order to fit.
Tire sealing system
California Proposition 65
Operating, servicing and maintaining a passenger vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger-vehicle.
The tire sealing system consists of a compressor and a bottle containing sealing compound. The sealing functions as a temporary repair.
The sealing compound effectively seals tires with punctures in the tread, but it should not be used to seal tires with punctures in the sidewall. Do not use the tire sealing system on tires with large tears, cracks or similar damage.
The compressor is intended for temporary tire sealing and is approved by Polestar.
LocationThe tire sealing system is stowed in the storage compartment under the hood.
Sealing compound expiration dateThe sealing compound bottle must be replaced if its expiration date has passed (see the decal on the bottle). Handle the old bottle as hazardous waste.
Tool kit
- Jack
- Wheel bolt key and towing eye