2022 Polestar 2 Parking Assist
Activating and deactivating Park Assist
Park Assist’s front and side sensors* are automatically activated when the motor is started. The rear sensors are activated if the vehicle is moving backward or reverse gear is engaged.
Activate or deactivate the function using this button in Camera view.
- Illuminated button indicator light – the function is activated.
- Extinguished button indicator light – the function is deactivated.
In vehicles equipped with Park Assist Camera, Park Assist can also be activated or deactivated from the relevant camera view.
Park Assist System
The center display shows an overview of the vehicle in relation to objects that have been detected.
The marked sector indicates where the obstacle is located. The closer the vehicle symbol is to a marked sector forward/rearward, the closer the detected obstacle is to your vehicle.
The side sectors change color as the distance between the vehicle and an object decreases.
The audible signals will also speed up the closer the obstacle is to the vehicle. The volume of the audio system will be automatically lowered.
Audible signals for obstacles in front and to the sides of the vehicle are active when the vehicle is moving but will cease after the vehicle has been stationary for approx. 2 seconds. Audible signals for obstacles behind the vehicle will remain active even when the vehicle is stationary.
If a detected obstacle is within approx. 30 cm (1 foot) from the front or rear of the vehicle, the tone will become constant and the active sensor’s field closest to the vehicle symbol will be filled in.
At distances within approx. 25 cm (0.8 foot) from an obstacle to the sides of the vehicle, a rapid pulsing signal will be given and the active sector fields will change color from orange to red.
The volume of the Park Assist audible signals can be adjusted while the signal is being given using the >II knob or in the Park Assist system settings.
- Tap in the center display.
- Tap Assist.
- Tap for Park Assist and select the desired setting.
Besides in the sector closest to the vehicle symbol, audible warnings are only provided for objects located directly in the vehicle’s path.
- The parking sensors are a complement to the driver’s attention to the vehicle’s surroundings. Their ability to detect obstacles at certain angles may be affected by the conditions during use.
- Pay particular attention to people and animals near the vehicle.
- Bear in mind that the front end of the vehicle may swing out towards oncoming traffic during the parking maneuver.
- Objects/obstacles may be closer to the vehicle than they appear on the screen.
- The function is supplementary driver support intended to facilitate driving and help make it safer – it cannot handle all situations in all traffic, weather and road conditions.
- The driver is advised to read all sections in the Manual about this function to learn of its limitations, which the driver must be aware of before using the function.
- Driver support functions are not a substitute for the driver’s attention and judgment. The driver is always responsible for ensuring the vehicle is driven in a safe manner, at the appropriate speed, with an appropriate distance to other vehicles, and in accordance with current traffic rules and regulations.
Park Assist and Park Assist Camera symbols and messages
Symbol | Message | Meaning |
---|---|---|
If the symbol is extinguished. | The rear Park Assist sensors are turned off and no acoustic warnings or field markings for obstacles/objects will be provided. | |
Cleaning needed Park Assist System sensors blocked | One or more of the sensors are blocked. Check and clean/remove the obstacle as soon as possible. | |
Park Assist System unavailable Service required | The system is not functioning as intended. Contact Polestar Customer Support. | |
Park Assist System Reduced functionality Service required | The system is not functioning as intended. Contact Polestar Customer Support. |
A text message can be erased by briefly pressing the button in the center of the right-side steering wheel keypad.
If a message cannot be erased, contact Polestar Customer Support.
Use extra caution when backing up as this symbol appears when a trailer, bicycle holder or similar is coupled and electrically connected to the vehicle.
If the symbol is not lit, the rear Park Assist sensors are disabled and will not provide any alerts for obstacles.
Defective Park Assist Camera
If a camera sector is dark and contains this symbol, this indicates that the camera is not functioning properly.
A dark camera sector may also be displayed in the following situations, but without the defective camera symbol:
- a door is open
Park Assist front, rear and sides
The warning signal has a continuous audible tone when the obstacle is less than approx. 30 cm(1 foot) from the vehicle.
Park Assist’s front sensors are activated automatically when the vehicle is started. They are active at speeds below 10 km/h(6 mph).
The distance monitored extends approx. 80 cm(2.5 feet) in front of the vehicle.
Park Assist is deactivated when the parking brake is used.
When installing auxiliary lights: Make sure these do not obscure the sensors – the auxiliary lights could be perceived as an obstacle.
The warning signal has a continuous tone when the obstacle is less than approx. 30 cm(1 foot) from the vehicle.
The rear sensors will be activated if the vehicle begins rolling backward or if reverse gear is engaged.
The distance monitored extends approx. 1.5 meters(5 feet) behind the vehicle.
When backing up with a trailer electrically connected to the vehicle’s electrical system or with a bicycle holder mounted, rear Park Assist will be automatically deactivated.
When backing up with a trailer, bicycle holder, etc. on the towbar without electrical cables connected, Park Assist may need to be switched off manually to prevent the sensors from reacting.
Park Assist’s side sensors are automatically activated when the vehicle is started. They are active at speeds below 10 km/h(6 mph).
The distance monitored is approx. 25 cm(0.8 foot) out from the sides.
The detection area of the side sensors increases significantly, however, when the steering angle of the front wheel increases and depending on the position of the steering wheel, obstacles up to approx. 90 cm(3 feet) diagonally behind or in front of the vehicle can be detected.
Park Assist limitations
The driver should be aware of the following limitations for Park Assist.
- The parking sensors have dead/blind spots where objects cannot be detected.
- Pay particular attention to people and animals near the vehicle.
- Bear in mind that the front end of the vehicle may swing out towards oncoming traffic during the parking maneuver.
Use extra caution when backing up as this symbol appears when a trailer, bicycle holder or similar is coupled and electrically connected to the vehicle.
If the symbol is not lit, the rear Park Assist sensors are disabled and will not provide any alerts for obstacles.
Objects such as chains, thin and glossy poles or low obstacles may end up in the “signal shadow” and then go temporarily undetected by the sensors – the pulsating tone may then unexpectedly stop instead of becoming a constant tone as expected.
The sensors cannot detect high objects, such as protruding ramps.
- In such situations, pay extra attention and maneuver/drive the vehicle very slowly or stop the current parking maneuver – there may be a high risk of damage to the vehicle or other objects since information from the sensors is not always reliable in such situations.
In some circumstances, the Park Assist System may produce false warnings due to external sound sources with the same ultrasonic frequencies as those the system works with.
Examples of such sources are horns, wet tires on asphalt, pneumatic brakes, exhaust noise from motorcycles, etc.
When a towbar is configured with the vehicle’s electrical system, the length of the towbar is taken into account when the function measures the distance to an object behind the vehicle.