Polestar 2

2022 Polestar 2 Attachment Points for Child Seats Owner’s Manual

2022 Polestar 2 Attachment points for child seats

ISOFIX/LATCH lower anchors

Lower anchors for ISOFIX/LATCH-equipped child seats are located in the outer rear seating positions.

Using the ISOFIX/LATCH lower child seat anchors

Location of the ISOFIX/LATCH anchors

Symbols on the covers mark the ISOFIX/LATCH anchor positions as shown. The attachment points are located behind covers between the backrest and the seat cushion. Always follow your child seat manufacturer’s installation instructions, and use both ISOFIX/LATCH lower anchors and top tethers whenever possible.

To access the anchors

  • Put the child restraint in position.
  • Open the covers to locate the anchors.
  • Fasten the attachment on the child restraint’s lower straps to the ISOFIX/LATCH lower anchors.
  • Firmly tension the lower child seat straps according to the manufacturer’s instructions.

WARNING

Polestar’s ISOFIX/LATCH anchors conform to FMVSS/CMVSS standards. Always refer to the child restraint system’s manual for weight and size ratings.

NOTE
  • The rear center seat is not equipped with ISOFIX/LATCH lower tether anchors. If a child restraint is used in this seat, attach the restraint’s upper anchor strap (if equipped with these) to the top tether anchor point for this strap and secure the child restraint with the vehicle’s center seat belt.
  • Always follow your child seat manufacturer’s installation instructions, and use both ISOFIX/LATCH lower anchors and top tethers whenever possible.

Fasten the attachment correctly to the ISOFIX/LATCH lower anchors

WARNING
  • Be sure to fasten the attachment correctly to the anchor (see the illustration). If the attachment is not correctly fastened, the child restraint may not be properly secured in the event of a collision.
  • The ISOFIX/LATCH lower child restraint anchors are only intended for use with child seats positioned in the outboard seating positions. These anchors are not certified for use with any child restraint that is positioned in the center seating position. When securing a child restraint in the center seating position, use only the vehicle’s center seat belt.

Lower child seat attachment points

  • The rear seats are equipped with lower child seat attachment points.
  • The lower child seat attachment points are intended for use with certain rear-facing child seats.
  • Always follow the manufacturer’s installation instructions when attaching a child seat to the lower child seat attachment points.

Location of child seat attachment points

Location of child seat attachment points for the rear seat.

The child seat attachment points for the rear seat are located on the rear section of the front-seat floor rails.

NOTE

Never store loose items around the support legs of a child seat. Make sure that the child seat’s loose parts (straps, for example) are secured in accordance with the child seat’s installation instructions.

Top tether anchors

The vehicle is equipped with upper tether anchors for child seats in the rear seat.

Child restraint anchorages

Upper attachment points and symbols on the back of the rear seat backrest.

Securing a child seat

  • Place the child restraint on the rear seat.
  • Route the top tether strap under the head restraint and attach it to the anchor.
  • Attach the strap for the lower tether anchors in the lower ISOFIX/LATCH attachment points. If the child restraint is not equipped with straps for the lower tether anchors, follow the instructions for attaching a child restraint using the automatic locking seat belt.
  • Firmly tension all straps.

Refer also to the child seat manufacturer’s instructions for information on securing the child seat.

NOTE

The parcel shelf must be removed before a child seat can be installed in the anchors.

WARNING
  • Always refer to the recommendations made by the child restraint manufacturer.
  • Polestar recommends that the top tether anchors be used when installing a forward-facing child restraint.
  • Never route a top tether strap over the top of the head restraint. The strap should be routed beneath the head restraint.
  • Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts or harnesses. The anchorages are not able to withstand excessive forces on them in the event of collision if full harness seat belts or adult seat belts are installed to them. An adult who uses a belt anchored in a child restraint anchorage runs a great risk of suffering severe injuries should a collision occur.
  • Do not install rear speakers that require the removal of the top tether anchors or interfere with the proper use of the top tether strap.
Automotive Solutions

Recent Posts

VW Jetta Engine Fuse Box Diagram

Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…

7 months ago

VW Jetta Passenger Fuse Box Diagram

Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…

7 months ago

2023 Ford F-150 Lightning Fuse Box Diagram

Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…

2 years ago

2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner’s Manual

2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…

2 years ago

2023 Land Rover Range Rover Evoque Exiting The Vehicle Owners Manual

2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…

2 years ago

2023 Land Rover Range Rover Evoque Front Seats Owners Manual

2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…

2 years ago