2021 Polestar 2 Front seat
Adjusting front seat cushion length
Control for adjusting seat cushion.
- Grasp the 1 handle on the front of the seat and pull upward.
- Adjust the length of the seat cushion.
- Release the handle and make sure the seat cushion locks into position.
Adjusting front seat lumbar support
Four-way button for adjusting the vehicle’s four-way lumbar support.
Lumbar support can be adjusted forward/rearward and up/down and is located on the side of the seat cushion.
Adjusting lumbar support
- Press the four-way button-up 1/down 3 to move the lumbar support upward/downward.
- Press the front part 2 of the four-way button to increase lumbar support.
- Press the rear part 4 of the four-way button to decrease lumbar support.
Adjusting the passenger seat from the driver’s seat
Activating the function
The function is activated via the function view in the center display:
Tap the Adjust Passenger Seat button to activate.
Adjust passenger seat
The driver must adjust the passenger seat within 10 seconds of activating the function. If no adjustment is made within this time, the function will be deactivated.
The driver adjusts the passenger seat using the controls on the driver’s seat:
- Move the passenger seat forward/rearward by moving the control forward/rearward.
- Change the backrest tilt of the passenger seat by moving the control forward/backward.
Adjusting the power front seats
- Four-way button for adjusting the seat’s four-way lumbar support.
- Raise/lower the front edge of the seat cushion by moving the control up/down.
- Raise/lower the seat by moving the control up/down.
- Move the seat forward/rearward by moving the control forward/rearward.
- Change the backrest tilt by moving the control forward/backward.
Only one movement (forward/rearward/up/down) can be performed at a time.
The front seat backrests cannot be folded down completely.
Front seats
Multifunctional front seat function overview
Power front seats
The seats can be adjusted when the engine is running and for a certain period of time after the door has been unlocked without the engine running. They can also be adjusted for a short period after the engine is turned off.
The power seats have an overload protector that is triggered if a seat is blocked by any object. If this occurs, remove the object and attempt to adjust the seat again.