- Driver side: Tap the driver’s side steering wheel and seat button in the climate bar in the center display to open the controls for steering wheel and seat heating.
Passenger side: The button for the heated seats is directly accessible in the climate bar on the passenger side.
- Tap the seat heating button repeatedly to select one of the four levels: Off, High, Medium or Low.
> The level is changed and the set level is displayed in the button.
Heated seats should not be used by people who have difficulty detecting temperature increases due to nerve damage or numbness or who for another reason may have difficulty operating the controls for seat heating.
Activating and deactivating the heated front seat
Seat heating can be set to automatically activate when the engine is started. When set to automatically activate, heating will be turned on at low ambient temperatures.
- Tap Settings in the Top view in the center display.
- Tap Climate.
- Select Auto Driver Seat Heating Levelland Auto Passenger Seat Heating Level to activate/deactivate automatic start of heated drivers and passenger seats.
> An “A” will be displayed next to the relevant seat heating button in the climate bar when auto-start has been activated.
- Select Low, Medium or High to select the level after the function has been activated.
Setting the blower speed for the front seats
- Tap the symbol in the center of the climate bar to open Climate view in the center display.
Blower control buttons in Climate view.
- Tap the desired blower speed: Off, 1–5or Max.
> The blower speed will be changed and the buttons for the set speed will light up.
The air conditioning will not engage if the blower is turned off completely, which may cause fogging on the inside of the windows.
The climate system automatically adapts airflow as needed within the set blower speed, which means that airflow speed may vary slightly within the same blower speed.
Setting the temperature for the front seats
Temperature buttons in the climate bar.
- Tap the left- or right-side temperature buttons in the center display’s climate bar to open the control.
Temperature control.
- Set the temperature by doing one of the following:
- dragging the control to the desired temperature, or
- tapping +− to raise/lower the temperature.
> The temperature will be set and the button will display the new temperature.
Heating/cooling cannot be accelerated by choosing a higher/lower temperature than the desired temperature.
Synchronize temperature
- Tap the driver’s side temperature button in the center display’s climate bar to open the control.
- Tap Synchronize temperature.
> The temperature for all of the vehicle’s climate zones will be synchronized with the one set for the driver’s side and the synchronization symbol will be displayed next to the temperature button.
Synchronization is stopped with another press on Synchronize temperature or by changing the temperature setting for a climate zone other than the drivers.