2021 Polestar 1 Navigation Settings Owners Manual

Settings can be personalized in the following areas:

Position Format
Map Display Format
Show Speed Cameras
Show Favorites
Point of Interest (POI)

Position Format

Select Position Format to designate/display the current location on the map using its address or its coordinates:

Address
Coordinates and Altitude

Map Display Format

Select Map Display Format to choose background lighting for the map:

Day – bright colors.
Night – dark colors for better night vision.
Auto– the system will switch between Day and Night depending on the ambient light in the passenger compartment.

Speed cameras

Select Show Speed Cameras to display speed cameras on the map.

Favorites

To display Favorites on the map, select.

Point of Interest (POI)

Select POIs to be displayed on the map under Point of Interest (POI). Tap on the desired category, e.g. “Transportation”, and then select show all or specific sub categories. Tap Backor Close to exit the menu.

Settings can be personalized in the following areas:

Map – manages the content and appearance of the map.
Route and Guidance – handles guidance and how routes are calculated and displayed.
Traffic – manages traffic information.

Route settings and guidance

Settings for how the route is calculated and how guidance is presented in the navigation system are selected here.
Adjust the volume by turning the volume knob while the voice is speaking.
SettingsNavigationRoute and Guidance

Settings can be personalized in the following areas:

Arrival Time Format
Voice Guidance Level
Choose Default Route Type
Route Learning
Avoidance Settings
Propose Gas Station

Arrival Time Format

Choose how arrival time will be displayed:

ETA (estimated time of arrival at the destination)
RTA (remaining time to arrival at destination)

Times are displayed according to the time zone of the destination.

Voice Guidance Level

Tap Voice Guidance Level.

Tap desired voice guidance:
- None (no automatic voice guidance, but guidance can be manually requested once)
- Low (only one message per guidance point)
- Medium (up to 3 messages per guidance point, with limited information provided)
- Full (up to 4 messages per guidance point and all available information provided)

Choose Default Route Type

Select the default type of route to be used:

Fast
Eco
Scenic (highways/freeways are avoided whenever possible; note that this could lead to longer travel times)

It is also possible to display an alternative route while driving.

Route Learning

Select Route Learning to allow data to be collected to optimize route calculations.

Avoid

Tap Avoidance Settings to open a menu of options to automatically avoid (if possible) when calculating a route. Possible selections include tunnels, ferries, congestion charge zones, etc.

Suggest service station

Tap Propose Gas Station to activate or deactivate the display of suggestions for nearby service stations in the instrument panel when the fuel level is low.

Traffic information settings

The following settings determine how traffic information is presented in the navigation system.
SettingsNavigationTraffic

Settings can be personalized in the following areas:

Show and Handle Traffic Events
Avoid Traffic Events
Show Free-Flowing Traffic
Real-Time Traffic Information

Show & Handle Traffic Events

Select to display traffic events on the map and use this information to calculate routes:

None
Major
All types

Avoid Traffic Events

Select to avoid traffic problems when calculating routes.

Never
Ask – (suggestions for alternate routes will be provided when available during the trip)
Always

Show Free-Flowing Traffic

Select Show Free-Flowing Traffic to show this on the map.

Using RTTI

Select Real-Time Traffic Information to use enhanced traffic information when the vehicle is connected to the Internet (RTTI).

2021 Polestar 1 Navigation Settings Owners Manual