- Tap Settings in the Top view in the center display.
- Tap .
- Select Edit Profile.
> A menu will open in which the driver profile can be changed.
- Tap the Profile Name box.
> A keyboard will be displayed and can be used to change the name. Tap to close the keyboard.
- Save the name change by pressing Backor Close.
> The name has now been changed.
Profile names may not begin with a space. If a space is entered first, the profile name will not be saved.
Driver profiles
Which settings are saved in driver profiles?
Many of the settings made in the vehicle will be automatically stored in the active driver profile if the profile is not protected. The vehicle has settings that can be made either personal or global. The personal settings are saved in driver profiles.
Settings that can be saved in a driver profile include screens, mirrors, front seat, navigation, audio and media system, language and voice control.
Some settings are global settings. These settings can be changed but are not saved to a specific driver profile. Changes to global settings affect all profiles.
Global settings
Global settings and parameters do not change when driver profiles are changed. They remain the same regardless of which driver profile is currently active.
Keyboard layout is an example of a global setting. If driver profile X is used to add additional keyboard languages, these languages will also be available for driver profile Y. The settings for keyboard layout are not saved to a specific driver profile – the settings are global.
Personal settings
If driver profile X has been used to e.g., set the brightness for the center display, driver profile Y will not be affected by this setting. It will only be saved to driver profile X because brightness setting is a personal setting.
Linking a key to a driver’s profile
- A remote key can be linked to a driver profile. This driver profile and all of its settings will then automatically be selected every time the vehicle is used with that particular key.
- The first time the key is used, it is not linked to any specific driver profile. The Guest profile is automatically activated when the ignition is switched on.
- A driver profile can also be selected manually without linking it to any key. When the vehicle is unlocked, the last active driver profile will be activated. If the key has ever been linked to a driver profile, it is not necessary to manually select a driver profile when using that particular key.
Linking a key to a specific driver profile
A remote key can only be connected to a driver’s profile when the vehicle is stationary.
First select the profile you would like to link to the key (if that profile is not already active). The active profile can then be linked to the key.
- Tap Settings in the Top view in the center display.
- Tap .
- Mark the desired profile. The display will return to Home view. The Guest profile cannot be linked to a remote key.
- Pull down Top view again and tap .
- Select Connect key to link the profile with the key. A driver profile can only be linked to the key currently being used in the vehicle. If there are any other keys in the vehicle, More than one key is found, put the key you want to connect on the backup reader will be displayed.
Location of the backup reader in the tunnel console.
> When the Profile connected to the key is displayed, the key and driver profile has been linked.
- Tap OK.
The key used is now linked to the driver profile and will remain so as long as the Connect key box is not deselected.
Protecting a driver profile
Protecting a driver profile is only possible when the vehicle is stationary.
To protect a driver profile:
- Tap Settings in the Top view in the center display.
- Tap .
- Select Edit Profile.
> A menu will open in which the driver profile can be changed.
- Tap Protect Profile to protect the profile.
- Confirm your selection to protect the profile by tapping Back/Close.
When the profile is protected, settings made in the vehicle will not be automatically stored to the profile. The changes must instead be saved manually under SettingsSystemDriver ProfilesEdit Profile by tapping Save current settings to the profile. If the profile is not protected, the settings will be automatically stored to the profile.
Resetting driver profile settings
Factory Reset is only possible when the vehicle is stationary.
- Tap Settings in the Top view.
- Tap .
- Select option Reset for the active profile, Reset for all profilesor Cancel.
Selecting a driver profile
- When the center display starts up, the selected driver profile will be shown at the top of the screen. The most recently used driver profile will be active the next time the vehicle is unlocked. A different driver profile can be selected once the vehicle has been unlocked. However, if the key has been linked to a driver profile, this profile will be used instead.
- There are two options for switching between driver profiles.
Option 1:
- Tap the name of the driver profile shown at the top of the center display when the display starts up.
> A list will appear, showing driver profiles that can be selected.
- Select desired driver profile.
- Tap Confirm.
> The driver profile has now been selected and the system will load the settings stored in that profile.
Option 2:
- Pull down Top view in the center display.
- Tap Profile.
> The same list as in option 1 will be displayed.
- Select desired driver profile.
- Tap Confirm.
> The driver profile has now been selected and the system will load the settings stored in that profile.
Option 3:
- Pull down Top view in the center display.
- Tap Settings in the Top view in the center display.
- Tap .
> A list will appear, showing driver profiles that can be selected.
- Select desired driver profile.
> The driver profile has now been selected and the system will load the settings stored in that profile.