2021 Polestar 1 Blind Spot Information Owners Manual

2021 Polestar 1-LOGO

2021 Polestar 1 Blind Spot Information2021 Polestar 1-PRODUCT

Activating or deactivating BLIS

The BLIS(Blind Spot Information) function can be activated or deactivated.
2021 Polestar 1 Blind Spot Information 1

Activate or deactivate the function using this button in the center display’s Function view.

  • GREEN button indicator light – the function is activated.
  • GRAY button indicator light – the function is deactivated.

If BLIS is activated when the engine is started, the indicator lights in the rearview mirrors will flash once.

If BLIS is deactivated when the engine is turned off, it will remain off the next time the engine is started and the indicator lights will not illuminate.

BLIS

The BLIS(Blind Spot Information) function is designed to help provide assistance in heavy traffic with several lanes moving in the same direction by helping the driver to detect the presence of vehicles in the “blind spot” area behind and to the side of the vehicle.
2021 Polestar 1 Blind Spot Information 2
Location of BLIS indicator light

BLIS is a driver support system designed to alert the driver of:

  • vehicles in your “blind spot”
  • vehicles approaching rapidly in adjacent lanes.
2021 Polestar 1 Blind Spot Information 3
  1. BLIS overview
  2. Blind spot zone
Rapidly approaching vehicle zone

The BLIS function is active at speeds above 10 km/h (6 mph).

The system is designed to react to:

  • vehicles passing your vehicle
  • vehicles that are rapidly approaching your vehicle from behind.

When BLIS detects a vehicle in zone 1 or a rapidly approaching vehicle in zone 2, an indicator light will illuminate in the relevant rearview mirror and glow steadily. If the driver then uses the turn signal on the side in which the warning has been given, the indicator light will become brighter and begin flashing.

If a passing vehicle’s speed is more than 15 km/h (9 mph) faster than your vehicle, BLIS will not react.

NOTE

The light illuminates the side of the vehicle where the system has detected the vehicle. If the vehicle is passed on both sides simultaneously, both lights come on.

WARNING
  • The function is supplementary driver support intended to facilitate driving and help make it safer – it cannot handle all situations in all traffic, weather and road conditions.
  • The driver is advised to read all sections in the Manual about this function to learn of its limitations, which the driver must be aware of before using the function.
  • Driver support functions are not a substitute for the driver’s attention and judgment. The driver is always responsible for ensuring the vehicle is driven in a safe manner, at the appropriate speed, with an appropriate distance to other vehicles, and in accordance with current traffic rules and regulations.
NOTE

The function uses the vehicle’s camera and/or radar units, which have certain general limitations.

BLIS limitations

BLIS(Blind Spot Information) functionality may be reduced in certain situations.
2021 Polestar 1 Blind Spot Information 4
Keep the marked area clean (on both the left and right sides of the vehicle).

Dirt, ice and snow covering the sensors may reduce functionality and prevent the system from providing warnings.

WARNING
  • BLIS does not work in sharp curves.
  • BLIS does not work when the vehicle is being reversed.
NOTE

The function uses the vehicle’s radar units, which have certain general limitations.

BLIS messages

A number of messages related to BLIS(Blind Spot Information) may be displayed in the instrument panel. Several examples are provided below.
Message Meaning
Blind spot sensor

Service required

The system is not functioning as intended. Contact Polestar Customer Support.

A text message can be erased by briefly pressing the 2021 Polestar 1 Adaptive Cruise Control 21 button in the center of the right-side steering wheel keypad. If a message cannot be erased, contact Polestar Customer Support.

Leave a Comment