2021 Polestar 1 Adaptive Cruise Control Owners Manual

Adaptive Cruise Control(Depending on market, this function can be either standard or optional.)

Adaptive Cruise Control (ACC) (Adaptive Cruise Control) can help the driver maintain a constant speed, combined with a preset time interval to the vehicle in front.

The camera/radar sensor measures the distance to the vehicle ahead.

Adaptive Cruise Control can help provide a more relaxed driving experience on long trips on highways or long, straight roads with even traffic flows.

The driver sets a speed and a time interval to the vehicle ahead. If the camera/radar sensor detects a slower-moving vehicle ahead, your vehicle’s speed will be automatically adapted according to the set time interval to that vehicle. When there are no longer slower-moving vehicles ahead, the vehicle will return to the set speed.

Adaptive Cruise Control regulates speed by accelerating and braking. It is normal for the brakes to emit a slight sound when they are being used to adjust speed.

Adaptive Cruise Control attempts to:

smoothly regulate speed. The driver must apply the brakes in situations requiring immediate braking. For example, when there are great differences in speed between vehicles or if the vehicle ahead brakes suddenly. Due to limitations in the radar sensor, braking may occur unexpectedly or not at all.
follow a vehicle ahead in the same lane and maintain a time interval to that vehicle set by the driver. If the radar sensor does not detect a vehicle ahead, it will instead maintain the speed set by the driver. This will also happen if the speed of the vehicle ahead exceeds the set speed for your vehicle.

WARNING

The function is supplementary driver support intended to facilitate driving and help make it safer – it cannot handle all situations in all traffic, weather and road conditions.
The driver is advised to read all sections in the Manual about this function to learn of its limitations, which the driver must be aware of before using the function.
Driver support functions are not a substitute for the driver’s attention and judgment. The driver is always responsible for ensuring the vehicle is driven in a safe manner, at the appropriate speed, with an appropriate distance to other vehicles, and in accordance with current traffic rules and regulations.

IMPORTANT

Only a workshop may perform maintenance on driver support components – contact Polestar Customer Support.

	: From standby mode – activates and sets the current speed
	: From active mode – deactivates/puts in standby mode
	: Activates the function from standby mode and resumes the set speed
	: Increases the set speed
	: Reduces the set speed
	Increases the time interval to the vehicle ahead
	Reduces the time interval to the vehicle ahead
	Target vehicle indicator: the function has detected and is following a target vehicle using the set time interval
	Symbol for time interval to the vehicle ahead

Adaptive Cruise Control displays

(Depending on the market, this function can be either standard or optional)

The following illustrations show how Adaptive Cruise Control (ACC)(Adaptive Cruise Control) can appear in the various displays in different situations.

Speed

Speed indicators
Set speed
Speed of the vehicle ahead The current speed of your vehicle

Time interval

Adaptive Cruise Control will only regulate the time interval to the vehicle ahead when the distance symbol shows two vehicles. A speed interval will be marked at the same time.

When driving

In the following illustration, Road Sign Information (RSI)(Road Sign Information) indicates that the maximum permitted speed is 130 km/h (80 mph).

The previous illustration shows that Adaptive Cruise Control is set to maintain a speed of 110 km/h (68 mph) and that there is no target vehicle ahead to follow.

The previous illustration shows that Adaptive Cruise Control is set to maintain a speed of 110 km/h (68 mph) and is following a target vehicle ahead, which is traveling at the same speed.

Adaptive Cruise Control limitations

(Depending on the market, this function can be either standard or optional.)

Adaptive Cruise Control (ACC)(Adaptive Cruise Control) may have limited functionality in certain situations.

Steep roads and/or heavy loads

Adaptive Cruise Control is primarily intended to be driven on flat roads. The function may not be able to maintain the correct time interval to the vehicle ahead when driving down steep hills. The driver should be extra attentive and prepared to apply the brakes.

Do not use Adaptive Cruise Control if the vehicle is carrying a heavy load.

WARNING

This is not a collision-avoidance system. The driver is always responsible and must intervene if the system fails to detect a vehicle ahead.
The function does not brake for people or animals and does not brake for small vehicles, such as bikes and motorcycles. Similarly, it does not brake for low trailers, oncoming, slow-moving or stationary vehicles, and objects.
Do not use the function in demanding situations, such as in city traffic, at intersections, on slippery surfaces, with a lot of water or slush on the road, in heavy rain/snow, in poor visibility, on winding roads, or on/off ramps.

NOTE

The function uses the vehicle’s camera and/or radar units, which have certain general limitations.

Adaptive Cruise Control standby mode

(Depending on market, this function can be either standard or optional)

Adaptive Cruise Control (ACC)(Adaptive Cruise Control) can be deactivated and put in standby mode. This may happen automatically or be due to driver intervention.

Standby mode means that the function is selected in the instrument panel but not activated. In standby mode, Adaptive Cruise Control will not regulate speed or distance to the vehicle ahead.

Standby mode due to action by the driver

Adaptive Cruise Control will be deactivated and put in standby mode if any of the following occurs:

The brakes are applied.
The gear selector is moved to N.
The vehicle is driven faster than the set speed for more than 1 minute.

Temporarily increasing speed using the accelerator pedal, e.g. when passing another vehicle, will not affect the setting. The vehicle will return to the set speed when the accelerator pedal is released.

WARNING

If Adaptive Cruise Control is in standby mode, the driver must intervene and regulate both speed and distance to the vehicle ahead.
If the vehicle comes too close to a vehicle ahead when Adaptive Cruise Control is in standby mode, the driver can be warned of the short distance by the Distance Alert* function.

Automatic standby mode

WARNING

With automatic standby mode, the driver is warned by an acoustic signal and a message on the instrument panel.

The driver must then regulate vehicle speed, apply the brakes if necessary, and maintain a safe distance to other vehicles.

Adaptive Cruise Control may go into standby mode if:

Any of the systems that Adaptive Cruise Control is dependent on stops working, e.g. stability control/anti-skid (ESC).(Electronic Stability Control)
The driver opens the door.
The driver unbuckles the seat belt.
The engine speed (rpm) is too low/high.
One or more of the wheels lose traction.
The brake temperature is high.
The parking brake is applied.
The camera/radar sensor is covered by snow or heavy rain (the camera lens/radar waves are blocked).
Your vehicle’s speed goes under 5 km/h (3 mph) and ACC cannot determine if the object ahead is a stationary vehicle or if it is another object, e.g. a speed bump.
Your vehicle’s speed goes under 5 km/h (3 mph) and the vehicle ahead turns so that ACC no longer has a vehicle to follow.

Adjusting set speed for driver support

It is possible to adjust set speeds for the cruise control, Adaptive Cruise Control* and Pilot Assist* functions.

	: Increases the set speed
	: Reduces the set speed
	Set speed

Change a set speed by pressing the (1) or (2) buttons briefly or by pressing and holding them:
- Brief press: Each press changes the speed in +/- 5 km/h (+/- 5 mph) increments.
- Press and hold: Release the button when the set speed indicator (3) has moved to the desired speed.

> The most recently set speed will be stored.

NOTE

For vehicles without Adaptive Cruise Control*, speed instead increases by +/- 1km/h (+/- 1 mph) each time the button is pressed.

Using the accelerator pedal

If speed is increased by depressing the accelerator pedal while pressing the (1) button on the steering wheel, the vehicle’s speed when the button is pressed will be stored as the set speed.

Possible speed

The lowest speed that can be set is 30 km/h (20 mph). When following another vehicle, ACC can monitor that vehicle’s speed and slow your own vehicle down to a standstill, but it is not possible to set speeds lower than 30 km/h (20 mph).

The driver support functions can follow another vehicle at speeds from a standstill up to 200 km/h (125 mph).

Pilot Assist can provide steering assistance from near-stationary speeds up to 140 km/h (87 mph).

Auto-hold braking with driver support

The driver support functions Adaptive Cruise Control* and Pilot Assist* have a special brake function in slow traffic and while stationary. In certain situations, the parking brake will be applied to keep the vehicle at a standstill.

Braking function in slow traffic and at a standstill

In slow-moving, stop-and-go traffic or when stopped at a traffic light, driving will resume automatically if the vehicle is stopped for less than approx. 3 seconds. If it takes more than 3 seconds for the vehicle ahead to begin moving again, the driver support function will go into standby mode and the auto-hold brake function will activate.

The function can be reactivated by:
- Pressing the button on the steering wheel keypad.
- Pressing the accelerator pedal.

> The function will resume following the vehicle ahead if it begins to move within approx. 6 seconds.

WARNING

A noticeable increase in speed may follow when the speed is resumed with the steering wheel button.

WARNING

The driver support system only issues a warning for obstacles detected by its camera and radar units, which means that warnings may come after a delay or not at all.

Never wait for a warning or assistance. Apply the brakes when necessary.

NOTE

Driver support can keep the vehicle stationary for no more than 5 minutes – after that time the parking brake is applied and the function is deactivated.

The parking brake must be released before driver support can be reactivated.

Deactivation of the Auto-hold brake functionIn certain situations, auto-hold will be deactivated when the vehicle is at a standstill and the function will go into standby mode. This means that the brakes will be released and the vehicle could begin to roll. The driver must actively apply the brakes to keep the vehicle stationary.

This can occur if:

The driver depresses the brake pedal.
The parking brake is applied.
The gear selector is moved to the P, N or R positions.
The driver puts Adaptive Cruise Control or Pilot Assist in standby mode.

Auto Activate Parking Brake

The parking brake is applied if the function is keeping the vehicle stationary using the brakes and:

The driver opens the door or unbuckles his/her seat belt.
The function has kept the vehicle at a standstill for more than approx. 5 minutes.
The brakes overheat.
The driver switches off the engine.

Collision risk warning from the driver support

The driver support systems Adaptive Cruise Control* and Pilot Assist* can help alert the driver if the distance to the vehicle ahead suddenly decreases to an unsafe distance.

Collision warning audible signal and symbol
Collision warning audible signal
Collision warning symbol

Camera/radar sensor distance monitoring

Adaptive Cruise Control and Pilot Assist use approx. 40% of the braking capacity. If a situation requires more braking force than driver support can provide, and if the driver does not apply the brakes, a warning light and audible warning signal will be activated to alert the driver that immediate action is required.

WARNING

The driver support system only issues a warning for vehicles detected by its radar unit – thus, a warning may come after a delay or not at all. Never wait for a warning. Apply the brakes when necessary.

NOTE

Visual warnings on the windshield may be difficult to notice in cases of strong sunlight, reflections, extreme light contrasts, or if the driver is wearing sunglasses or is not looking straight ahead.

Deactivating Adaptive Cruise Control

(Depending on market, this function can be either standard or optional)

Adaptive Cruise Control (ACC)(Adaptive Cruise Control) can be deactivated and switched off.

Press the button on the steering wheel (2).

> The symbol and indicators are extinguished – Adaptive Cruise Control is set in standby mode. The time interval indicator light and any symbols for the target vehicle will go out.

Press the (1) or (3) buttons on the steering wheel to select another function.

> The Adaptive Cruise Control symbol and marking (4) in the instrument panel will go out and the set/stored maximum speed will be erased.

WARNING

If Adaptive Cruise Control is in standby mode, the driver must intervene and regulate both speed and distance to the vehicle ahead.
If the vehicle comes too close to a vehicle ahead when Adaptive Cruise Control is in standby mode, the driver can be warned of the short distance by the Distance Alert* function.

Disclaimers

Optional/accessory – The equipment described in the Manual is not available in all cars – the cars have different equipment depending on adaptations for the needs of different markets and national or local laws and regulations.

Selecting and activating Adaptive Cruise Control

(Depending on market, this function can be either standard or optional.)

Adaptive Cruise Control (ACC) (Adaptive Cruise Control) must first be selected and then activated before it can regulate speed and distance.

To start the function:

The driver’s seat belt must be buckled and the driver’s door must be closed.
There must be a vehicle ahead (target vehicle) within a reasonable distance or your vehicle’s current speed must be at least 15 km/h (9 mph).

Press the ◀ (1) or ▶ (3) button on the steering wheel keypad and scroll to the Adaptive Cruise Control symbol (4).

> Gray symbol – Adaptive Cruise Control is in standby mode.

When Speed Limiter is selected, press (2) on the steering wheel keypad to activate.

> White symbol – Speed Limiter starts and the current speed is stored as the maximum speed.

Reactivating Adaptive Cruise Control to the last stored speed

When Adaptive Cruise Control is selected, press on the steering wheel keypad to activate.

> The Cruise Control marking in the instrument panel will change from GRAY to WHITE and the vehicle will then return to the most recently set speed.

WARNING

A noticeable increase in speed may follow when the speed is resumed with the steering wheel button.

Disclaimers

* Optional/accessory – The equipment described in the Manual is not available in all cars – the cars have different equipment depending on adaptations for the needs of different markets and national or local laws and regulations.

Setting time intervals to the vehicle ahead

The time interval to the vehicle ahead can be set for the functions Adaptive Cruise Control*, Pilot Assist* and Distance Alert*.

Different time intervals to the vehicle ahead can be selected and are shown in the instrument panel as 1–5 horizontal bars. The more bars, the longer the time interval. One bar represents an interval of approx. 1 second to the vehicle ahead. 5 bars represents approx. 3 seconds.

NOTE

When the symbol in the instrument panel shows a vehicle and a steering wheel, Pilot Assist is following a vehicle ahead at a preset time interval.

When only a steering wheel is shown, there is no vehicle ahead within a reasonable distance.

NOTE

When the symbol in the instrument panel shows two vehicles, the Adaptive Cruise Control is following the vehicle ahead at a preset time interval.

When only one vehicle is shown, there is no vehicle ahead within a reasonable distance.

Controls for setting a time interval.
Reduce the time interval
Increase the time interval

Distance indicator

Press the (1) or (2) button to decrease or increase the time interval.

> The distance indicator (3) shows the current time interval.

In order to help your vehicle follow the vehicle ahead as smoothly and comfortably as possible, Adaptive Cruise Control allows the time interval to vary noticeably in certain situations. At low speeds, when the distance to the vehicle ahead is short, Adaptive Cruise Control increases the time interval slightly.

NOTE

The greater the vehicles’ speed, the greater the distance between them for a set time interval.
Only use the time intervals permitted by local traffic regulations.
If driver support does not seem to respond with a speed increase when activated, it may be because the time interval to the vehicle ahead is shorter than the set time interval.

WARNING

Only use a time interval suitable for the current traffic conditions.
The driver should be aware that short time intervals give them limited time to react and act to any unforeseen traffic situation.

Switching between cruise control and Adaptive Cruise Control in the center display

When the regular cruise control (CC) is selected in the instrument panel, you can switch to Adaptive Cruise Control (ACC) in the center display’s Function view.

Activate or deactivate the function using this button in the center display’s Function view.

Illuminated button indicator light – Adaptive Cruise Control is deactivated and the regular cruise control is in standby mode.
Extinguished button indicator light – regular cruise control is deactivated and the Adaptive Cruise Control is in standby mode.

A symbol in the instrument panel indicates which cruise control system is active
Cruise control (CC)	Adaptive Cruise Control (ACC)

Switching target vehicles with driver support

The driver support functions Adaptive Cruise Control* and Pilot Assist* have a function that allows switching target vehicles at certain speeds.

Switching target vehicles

If the target vehicle ahead turns suddenly, there may be stationary traffic ahead.

When driver support is actively following another vehicle at speeds under 30 km/h (20 mph) and switches targets from a moving vehicle to a stationary vehicle, driver support will brake for the stationary vehicle.

WARNING

When driver support follows another vehicle at speeds over approx. 30 km/h (20 mph) and changes target vehicle – from a moving vehicle to a stationary one – driver support will ignore the stationary vehicle and instead accelerate to the stored speed.

The driver must then intervene and apply the brakes.

Automatic standby mode when switching targets

Driver support disengages and goes into standby mode if:

your vehicle’s speed goes under 5 km/h (3 mph) and driver support cannot determine if the target is a stationary vehicle or if it is another object, e.g. a speed bump.
your vehicle’s speed goes under 5 km/h (3 mph) and the vehicle ahead turns so that driver support no longer has a vehicle to follow.

Symbols and messages for Adaptive Cruise Control

(Depending on market, this function can be either standard or optional)

A number of symbols and messages relating to Adaptive Cruise Control (ACC)(Adaptive Cruise Control) may be displayed in the instrument panel and/or the head-up display.

Symbol	Message	Meaning
	The symbol is WHITE	The vehicle is maintaining the set speed.
	Adaptive Cruise Contr. Unavailable The symbol is GRAY	Adaptive Cruise Control is in standby mode.
	Adaptive Cruise Contr. Service required The symbol is GRAY	The system is not functioning as intended. Contact Polestar Customer Support.
	Windscreen sensor Sensor blocked, see Manual	Clean the windshield in front of the camera and radar sensors.

A text message can be erased by briefly pressing the button in the center of the right-side steering wheel keypad. If a message cannot be erased, contact Polestar Customer Support.

Disclaimers

2021 Polestar 1 Adaptive Cruise Control Owners Manual