CHANGING THE REMOTE CONTROL BATTERY – VEHICLES WITH: PUSH BUTTON START
 WARNING: Keep batteries away from children to prevent ingestion. Failure to follow this instruction could result in personal injury or death. If ingested, immediately seek medical attention. WARNING: If the battery compartment does not securely close, stop using the remote control and replace it as soon as possible. In the meantime, keep the remote control away from children. Failure to follow this instruction could result in personal injury or death. |
The remote control uses one coin-type 3-volt lithium battery CR2450 or equivalent.
- Push the release button and pull the key blade out.
2. Twist a thin coin under the tab hidden behind the key blade head to remove the battery cover.
- Insert a screwdriver, and carefully remove the battery.
- Install a new battery with the + facing upward.
- Reinstall the battery housing cover onto the transmitter and install the key blade.
Note: Do not wipe off any grease on the battery terminals or on the back surface of the circuit board.
Note: Replacing the battery does not erase the programmed key from your vehicle.The remote control should operate normally.
CHANGING THE REMOTE CONTROL BATTERY – VEHICLES WITHOUT: PUSH BUTTON START
| WARNING: Keep batteries away from children to prevent ingestion. Failure to follow this instruction could result in personal injury or death. If ingested, immediately seek medical attention. WARNING: If the battery compartment does not securely close, stop using the remote control and replace it as soon as possible. In the meantime, keep the remote control away from children. Failure to follow this instruction could result in personal injury or death. |
Battery Replacement ProcedureThe remote control uses one coin-type 3-volt lithium battery CR2032 or equivalent.Press the button to release the key blade before beginning the procedure.
- Insert a screwdriver, in the position shown and gently push the clip.
- Press the clip down to release the battery cover.
3. Carefully remove the cover.
4. Insert a screwdriver as shown to release the battery.
Note: Do not touch the battery contacts or the printed circuit board with the screwdriver.
- Remove the battery.
- Install a new battery with the + facing up.
- Replace the battery cover.
Note: Do not wipe off any grease on the battery terminals or on the back surface of the circuit board.
Note: Replacing the battery does not erase the programmed key from your vehicle.The remote control should operate normally.
2022 Ford Maverick Owners Manual
Additional Information
Mileage, safety rating, and performance for your 2022 Ford Maverick.