2022 Lucid Air Wipers and Washers Owners Manual

2022 Lucid Air Wipers and Washers

Wipers

CAUTION: Do not activate the wipers if they are frozen to the windshield; this could damage the wiper blades and the wiper motor.
CAUTION: Do not activate the wipers on a dry windshield; this could damage or cause unnecessary wear to the wiper blades.

Control wipers using the icons in the left Cockpit Panel as follows:

• • OFF
  • In AUTO, the vehicle’s rain sensor detects whether or not it is raining and activates the wipers as required. The sensitivity of the wiper activation is selected by the LO or HI icons.

• LOW-speed continuous wipe
• HIGH-speed continuous wipe

NOTE: Intervals between wipes reduce as the vehicle’s speed increases.

Washers

WARNING: Operating the washers in cold weather could cause the fluid to freeze on the windshield, obscuring your vision and causing a collision. Use the windshield heater to warm the windshield to reduce the possibility of fluid freezing.

The left steering column stalk button is used for wiper controls. To get a single dry wipe, press the button to the first detent once, or press and hold at the first detent for multiple dry wipes. To spray the washer fluid press the button to the second detent or press and hold at the second detent for multiple wash-wipe cycles.
The wipers will operate with washer. Release the button to stop the washer. After the button is released, the wipers will make several extra sweeps.

If the fluid level in the washer reservoir is low, the warning indicator will be displayed on the Cockpit Panel.
CAUTION: Do not operate the washers when the fluid reservoir is empty or frozen. This can cause the washer pump to overheat and fail.