Cabin heating, ventilation, and air conditioning is divided into four zones: The driver and passenger side in front, and the left and right sides in the rear.
These zones can be adjusted simultaneously or individually by using the Pilot Panel, the Rear Center Console Display, or the buttons on the dash.
On the bottom of the Pilot Panel, press &. Press
Use the sliding bar to adjust temperature and fan speed for that zone. Slide the bar all the way down to turn the fan Off.
The buttons on the dash can be used to adjust the temperature and fan speed for the driver and front passenger.
Move a button up or down once to change the temperature or fan speed by #1 increment. Press and hold the toggle to raise or lower by multiple increments.
When the temperature control buttons are used, the right Cockpit Panel will open a small Peek window along the bottom of the display. This window displays the current temperature and fan settings, and will update according to the control interactions. Any settings actively being changed are highlighted.
NOTE: The Peek window automatically disappears after a few seconds of inactivity. Touch or swipe anywhere on the Peek window to dismiss it sooner.
From the main menu, select Climate to access the controls for the rear zones. To return to the main menu, press on the bottom bar and swipe up.
Press an arrow once to change the temperature or fan speed by 1 increment. Press and hold adjust by multiple increments
NOTE: When the system does not detect any passengers in the rear seats, climate controls are automatically turned Off.
Preconditioning
Preconditioning is available within the Lucid mobile app, allowing you to remotely set the cabin temperature or windshield defrosting controls.
NOTE: When preconditioning is activated, any changes to the temperature controls via the Pilot Panel will cancel the feature.
To defrost the windshield, press the icon on the left Cockpit Panel or from the 8 screens on the Pilot Panel. The icon will highlight when activated.
Once pressed, heat and fan speed will switch to high settings, and airflow will be directed through the vents at the base of the windshield.
NOTE: When the front defrost is activated, any changes to the temperature controls via the Pilot Panel will cancel the feature.
To activate the rear window defroster, press the icon on the left Cockpit Panel or from the & screen on the Pilot Panel. The icon will highlight when activated.
After approximately 15 minutes, the defroster will automatically turn off.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…