2022 Lucid Air Heating & Ventilation Air Conditioning
Temperature Control
Cabin heating, ventilation, and air conditioning is divided into four zones: The driver and passenger side in front, and the left and right sides in the rear.
These zones can be adjusted simultaneously or individually by using the Pilot Panel, the Rear Center Console Display, or the buttons on the dash.
Pilot Panel climate controls
On the bottom of the Pilot Panel, press &. Press 
FRONT or REAR to access the controls for those zones.
Use the sliding bar to adjust temperature and fan speed for that zone. Slide the bar all the way down to turn the fan Off.
This turns all controls for all four zones On or Ott. For REAR controls, this turns all controls for the two rear zones On or Off.
Press to turn air conditioning On or Off.
Press to switch between air circulation modes. Cabin air can be continuously recirculated, or a blend of fresh and cool air can be drawn from outside.
NOTE: Avoid recirculating cool interior air for extended periods, as this can fog up the windows.
Front windshield defrost. See Windshield Defrost.
Rear defrost and side-view mirrors. See Rear Window Defrost.
Activating this teature maintains the current cabin temperature after exiting the vehicle for 45 minutes.
NOTE: You will be prompted to confirm your selection.
NOTE: This feature automatically disables when the battery drops below 50 miles (80 kilometers) of range.
Press to open the Settings menu. From this menu, auto-conditioning the seats and steering wheel can be toggled On or Off.
When this feature is On, zone fan speed and vent modes are both automated by the system based on the set temperature.
When SYNC is activated, all climate control states are synchronized with the driver zone (temperature value, fan speed value, and vent modes).
NOTE: If a passenger adjusts a control while SYNC is On, this turns SYNC Off. The control states for the remaining zones stay as they were previously set while in SYNC
Press an icon to turn the fan for that area On or Off. Multiple areas can be selected simultaneously.
The buttons on the dash can be used to adjust the temperature and fan speed for the driver and front passenger.
Move a button up or down once to change the temperature or fan speed by #1 increment. Press and hold the toggle to raise or lower by multiple increments.
When the temperature control buttons are used, the right Cockpit Panel will open a small Peek window along the bottom of the display. This window displays the current temperature and fan settings, and will update according to the control interactions. Any settings actively being changed are highlighted.
NOTE: The Peek window automatically disappears after a few seconds of inactivity. Touch or swipe anywhere on the Peek window to dismiss it sooner.
Rear Center Console Display
From the main menu, select Climate to access the controls for the rear zones. To return to the main menu, press on the bottom bar and swipe up.
Press an arrow once to change the temperature or fan speed by 1 increment. Press and hold adjust by multiple increments
NOTE: When the system does not detect any passengers in the rear seats, climate controls are automatically turned Off.
Preconditioning
Preconditioning is available within the Lucid mobile app, allowing you to remotely set the cabin temperature or windshield defrosting controls.
NOTE: When preconditioning is activated, any changes to the temperature controls via the Pilot Panel will cancel the feature.
Defrost
Windshield defrost
To defrost the windshield, press the icon on the left Cockpit Panel or from the 8 screens on the Pilot Panel. The icon will highlight when activated.
Once pressed, heat and fan speed will switch to high settings, and airflow will be directed through the vents at the base of the windshield.
NOTE: When the front defrost is activated, any changes to the temperature controls via the Pilot Panel will cancel the feature.
Rear window defrost
To activate the rear window defroster, press the icon on the left Cockpit Panel or from the & screen on the Pilot Panel. The icon will highlight when activated.
After approximately 15 minutes, the defroster will automatically turn off.