FCC Notes: Wireless Charger-JVIiS USA
FCC ID: 2AZX6-1LCID350001
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference top radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
FCC Notes:
FCC Statements
FCC S 15,19 Labelling requirements
This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
FCC S 15.21 Information to User Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Notes: Universal Garage Door Opener Transmitter Gentex Corp.
FCC ID: NZLADHL5D
FCC (USA) and IC (Canada):
This device complies with FCC rules part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions:
WARNING: The transmitter has been tested and complies with FCC and IC rules.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End-users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must be at least 20cm from the user and must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Notes: Long Range Radar – Automotive Distance Control Systems GmbH
FCC ID: OAYARS5B IC: 4135A-ARS5B Canada only:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions
Canada & US:
US: FCC Notice
Radiofrequency radiation exposure Information
FCC Notice
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Note: Bluetooth Vehicle Key, ACM Node BTLE/LF, ACM Node BTLE/LF/NFC Pektron Group
FCC ID: AQO013, AQOO12, AQ0011
US
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End-users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Interference Statement
This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. It this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
For products available in the USA/Canada market, only channel 1-11 can be operated. Selection of other channels is not possible.
IMPORTANT NOTE:
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated witha minimum distance of 25cm between the radiator & your body.
NOTE:
WARNING: DO NOT attempt to remove, access, or modify the LiDAR unit in this vehicle. The LiDAR unit is a ClassI laser device subject to regulation by the FDA. There are NO permitted service or maintenance procedures for your vehicle’s LiDAR. If you suspect that the LiDAR unit is not functioning properly, contact Lucid immediately for instructions.
Vehicle Patents
A list of Lucid Air patents can be found at www.lucidmotors.com/legal.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…