2022 Lucid Air Disabling the Power System
Safety Precautions
- WARNING: In the event of a fire, immediately contact your local fire emergency responders.
- WARNING: ALWAYS ASSUME THAT HIGH-VOLTAGE COMPONENTS ARE ENERGIZED. Cutting, crushing, or touching high-voltage components can result in serious injury or death.
- WARNING: High-voltage cables and components may remain energized for up to 2 minutes after disabling.
- WARNING: High-voltage batteries can self-ignite even after extinguishing the initial fire.
- WARNING: The airbags and other supplemental restraint systems may remain powered for up to 2 minutes after disabling.
- WARNING: In the event of a fire involving a charging station, treat it as an energized electrical fire until power to the charger is confirmed to shut off.
- WARNING: This vehicle does not have an internal combustion engine. Lack of engine noise does not mean the vehicle is OFF. Silent movement capability exists until the vehicle completely shuts down.
Emergency Responder Cut Loop
You can locate the emergency responder cut loop under the hood on the Right Side, near the suspension strut tower.
You can determine the location of the cut loop by the yellow label wrapped around it. This label is visible even with the maintenance access panel in place. Double cutting and removing the emergency responder cut loop shuts down both the high-voltage and the 12-volt battery systems.
NOTE: The cut loop is a low-voltage (12V) cable.