2022 Land Rover Range Rover Vehicle Labels Owners Manual

2022 Land Rover Range Rover Vehicle Labels

LABEL LOCATIONS

Warning labels attached to your vehicle showing this symbol mean: Do not touch or adjust components before reading the relevant instructions in the handbook.

Labels showing this symbol indicate that the ignition system utilizes very high voltages. Do not touch any ignition components while the starter switch is switched on.

1. Hood locking platform: Air conditioning label.
2. Top of the battery: Battery warning symbols.
3. The Vehicle Identification Number (VIN) is stamped on a plate, visible through the lowest part of the left side of the windshield. The number is also stamped into the right-side suspension tower.
   NOTES

   The VIN number may need to be quoted when communicating with a retailer/authorized repairer.
4. End of the dashboard (passenger side): Passenger airbag label.
5. Sun visor: Airbag label and the vehicle handling label.
6. The base of the B pillar: VIN number.
7. The base of the B pillar, or inside base of the front door: Tire pressure label, airbag warning label.
8. Mid-way up the B pillar: Side airbag warning label.
9. Inside the fuel filler flap: Fuel label.
10. Engine number: V6 and V8 petrol. The number is located on the right-side camshaft cover.

    V6 Diesel – The number is located on the front of the left-side camshaft cover.

11. Loadspace cover warning label: Located on the underside of the loadspace cover.

It is important that you are familiar with these subjects, to make sure that your vehicle and its features are used safely.

Labels showing this symbol indicate that the hybrid vehicle system utilizes very high voltages. Do not touch any component that has this label or is colored orange.

The high voltage warning labels are stamped on the following components of the Hybrid Electric Vehicles:

1. Automatic transmission.
2. Heating, ventilation, and air conditioning (HVAC) compressor.
3. High voltage heater.
4. High voltage inverter: The high voltage warning label is located on the top of the inverter.
5. High voltage battery: The high voltage warning label is located on the top of the battery.
6. Master switch disconnect (MSD) connector.