2022 Land Rover Range Rover Rear Seats
MANUAL SEATS
Take care when retrieving items that have fallen down the side, back, front or underneath the seat. Sharp objects may be present in these areas, which could present a risk of injury. Always stop the vehicle before retrieving items.
To adjust the angle seatback angle:
- Lift the adjustment lever.
- Adjust the seatback to the desired angle.
- Release the adjustment lever.
ELECTRIC SEATS
Use the switch mounted on the door trim panel to adjust the position of the rear seatback.
Take care when retrieving items that have fallen down the side, back, front or underneath the seat. Sharp objects may be present in these areas, which could present a risk of injury. Always stop the vehicle before retrieving items.
If rear window operation is inhibited, electric rear seat movement is also inhibited. See ELECTRIC WINDOWS.
EXECUTIVE CLASS SEATS
The executive class seat controls are located on the door trim panel. Move the appropriate control in the required direction of seat movement.
- Head restraint height and angle. See HEAD RESTRAINTS OVERVIEW.
- Bolster inflate and deflate.
- Lumber support, and bolster inflate and deflate.
- Leg rest height and angle.
NOTES
Before deploying the leg rest, make sure the front seat is in a position to allow full movement without clashing.
- Seat cushion forward and rearward position.
NOTES
The seat rises as it moves forward.
- Seatback angle.
- Upper seatback angle.
When a rear seat is unoccupied, and the vehicle is being driven, the seat resets to the fully reclined position. The seat can be returned to the desired position either manually, by selecting a stored memory setting on the door panel, or via the front touchscreen.
Take care when retrieving items that have fallen down the side, back, front, or underneath the seat. Sharp objects may be present in these areas, which could present a risk of injury. Always stop the vehicle before retrieving items.
Do not use a rear seat entertainment screen as an aid to enter or exit the vehicle. Damage may occur to the screen tilt mechanism.
A number of executive class rear seat features described in this Owner’s Handbook require interaction with the front seats. Features that require interaction with the front seats are inhibited if the front seats are occupied.
Supplementary comfort pillows, where supplied, should only be used when the vehicle is stationary.
The executive class seats also feature:
- Climate control. See SEAT COMFORT AND ADJUSTMENT.
- Seat massage. See REAR SEAT MASSAGE.
The rear seat console will not deploy if the ski hatch is unlatched.
The rear seat console will not return to the stored position if the following conditions exist:
- The ski hatch is unlatched.
- The rear seat console lid is open.
- The rear seat cup holders are deployed.
- Child locks are activated.
REAR SEAT POSITION MEMORY
Before activating the seat memory, make sure that the area surrounding the seat is clear of obstructions. All occupants should be clear of moving parts. Personal injury may result if any part of the body is caught in a moving seat.
- Press the memory store button to activate the memory function.
- Press one of the preset buttons within 5 seconds to store the current seat settings.
Press the relevant preset button to recall a saved position.
REAR SEAT COMFORT POSITION
The executive class rear seats can be adjusted to provide a more comfortable position.
The rear seat comfort feature does not operate if the front passenger seat is occupied.
The rear seat comfort feature is only available on vehicles fitted with executive class seats.
- One-touch recline.
- One-touch raise.
- Foot rest.
Press the recline button (1) to move the executive class rear seat to the comfort position. Simultaneously, the front passenger’s seat moves forward to provide more leg room for the rear seat occupant. The front seat seatback also moves to an upright position, and the head restraint folds forward.
Press the raise button (2) to return the front and rear seats to their original positions.
Press the foot rest button (3) to adjust the position of the foot rest, if required.
REAR SEAT MASSAGE
Press the massage button to turn the seat massage feature on. Seat massage will start using the previously selected settings, if applicable. Press the massage button again to turn the feature off. The seat massage feature retains the most recently selected settings.
Seat massage can also be accessed and adjusted via the touchscreen. See SEAT MASSAGE.
PASSENGER SEAT AWAY
The front passenger seat can be adjusted to provide more leg room for the rear seat occupant.
The passenger seat away feature does not operate if the front passenger seat is occupied.
The passenger seat away feature is accessed via the touchscreen. See REMOTE SEATS.
- Front seat selection.
- Passenger seat away.
Press the button (2) to move the front passenger seat fully forward.
The rear seat occupant can also adjust the position of the front passenger seat manually. Press the button (1) to gain control of the front passenger seat. The button illuminates to confirm the front seat is being controlled. Use the rear seat switches to move the front passenger seat to the required position.
Front seat control is stopped automatically after 2 minutes.
The passenger seat away feature can also be accessed via the touchscreen. See REMOTE SEATS.
FOLDING AND RAISING THE REAR SEATS
Never allow passengers to ride in the loadspace. In a collision, people riding in the loadspace are more likely to be seriously injured or killed. Do not allow anyone to travel in any area of the vehicle that is not equipped for passengers. Be sure that everyone in the vehicle is in a seat and using a seat belt properly.
In a collision or sudden stop, unsecured objects could be thrown inside the vehicle, striking and injuring occupants. Always properly store and secure cargo and other objects in the vehicle.
Make sure that when a seatback is raised, the locking mechanism is fully engaged. An unsecured seatback may not properly support an occupant during a collision or sudden stop.
When raising the rear seats, make sure the seat belts are correctly routed into the seat belt guides and not trapped behind the seats. An incorrectly routed seat belt may not properly restrain an occupant during a collision or sudden stop.
Make sure the head restraints are raised to the correct position before the seats are used by a passenger. The head restraint must be positioned correctly to restrain rearward movement of the head in a collision.
Before folding or raising rear seats, make sure any rear fitted screens are not in the movement path of the folding seat. Damage may occur to the seat or the screen as a result of the two colliding.
The split-fold rear seat can be folded completely to accommodate large loads, or partially folded to accommodate loads while retaining seating for passengers.
To fold the seatback: Raise the release lever. The seatback folds down against the seat cushion.
To raise the seatback: Lift the seatback and raise it to the upright position. Make sure the seatback is locked firmly into position.
It is not possible to fold the left-side rear seat on vehicles with a rear fridge.
Before folding or raising executive-class rear seats, make sure the rear seat belts are stored between the seat bolster and the D pillar, and the armrest is in the stowed position. See SEAT BELT STORAGE.
A set of seat buttons is located in the load space. For vehicles with standard electric rear seats:
- Press and hold to fold or raise the left-side seatback.
- Press and hold to fold or raise the right-side seatback.
For vehicle’s with executive class rear seats, press and release the appropriate button.
Standard electric rear seats are disabled if the rear seatbacks are moved through a full fold and raise sequence more than three times in quick succession. The feature is re-enabled after 2 minutes.
If the feature detects the rear seatbacks will clash with the front seats, it automatically moves the front seats. The anti-clash feature is called intelligent seat cargo mode. See INTELLIGENT SEAT CARGO MODE.
The electric rear seats can also be folded using a smartphone app and the touchscreen. See INCONTROL OVERVIEW and REMOTE SEATS.
INTELLIGENT SEAT CARGO MODE
Before activating intelligent seat cargo mode, make sure that the area surrounding the seats is clear of obstructions. All occupants should be clear of moving parts. Personal injury may result if any part of the body is caught in a moving seat.
Intelligent seat cargo mode automatically moves the front seats if it detects a clash will occur when folding the electric rear seatbacks. In order for intelligent seat cargo mode to operate, the following conditions must be in place:
- Vehicles with standard electric rear seats: The loadspace button is kept pressed.
Vehicles with executive class rear seats: The loadspace button is pressed and released.
- The vehicle is stationary.
- The vehicle is in Park (P).
When the fold sequence is completed, Intelligent Seat Cargo Mode automatically returns the front seats as close as possible to their original positions, depending on the proximity of the rear folded seats.
On vehicles fitted with executive class rear seats, center rear seat belt buckles may become lodged in between the seat cushions following intelligent seat cargo mode operation. If the seat buckles become lodged, retrieve them from the lodged position in between the seat cushions to make sure they are correctly repositioned for seat belt operation. If a buckle cannot be retrieved manually, move the seat cushions electronically to dislodge the buckle. EXECUTIVE CLASS SEATS.
REMOTE SEATS
The touchscreen allows the user to remotely adjust the position of, or fold and raise, the passenger seats.
Before folding or raising executive class rear seats, make sure the rear seat belts are stored between the seat bolster and the D pillar. See SEAT BELT STORAGE.
Seat comfort settings, e.g. massage, heating, etc., can be controlled remotely via the lower touchscreen. See SEAT COMFORT AND ADJUSTMENT.
To adjust the position of a passenger’s seat using the touchscreen:
- From the HOME SCREEN, swipe left to select the EXTRA FEATURES screen.
- Select Seats.
The SEATS screen allows the user to fold or raise a passenger’s seat. Touch the appropriate seat image on the touchscreen, then touch the Fold on to lower the seat. After the seat is lowered, the Fold soft key is replaced with an Unfold soft key.
To lower all seats, touch the Fold all soft key. After the seats are lowered, the Fold all soft key is replaced with an Unfold all soft key.
The SEATS screen also presents a number of other features:
- Convenient seat fold can be used to prepare the vehicle to receive a large amount of luggage. Touch the seat soft key to activate the feature. When touched, all rear seats lower, and the tailgate opens.
- Chauffeur Mode: Touch to open the CHAUFFEUR MODE screen. Chauffeur mode allows the driver to carry out the following functions via the touchscreen:
Raise and recline any passenger’s seat.
Recall a front passenger’s seat memory settings.
Activate the passenger seat away function. See PASSENGER SEAT AWAY.
When a seat returns to the upright position, it should lock into place automatically. If lock mode is not detected, the seat will move forward three times and attempt to lock. Keep clear from the seat during this process. If the seat does not lock after the third attempt, it folds fully down into cargo mode. Check for any obstructions and attempt to fold again. If the seat does not return to the fully upright position after this procedure, contact a retailer/authorized repairer.
If any items are grayed out on the touchscreen, the operation is inhibited. Refer to, and follow, the on-screen instructions.
RESTRICTED REAR SEAT TRAVEL
Check for and remove any obstructions should electric seat movement stop unexpectedly during folding or raising.
Once any obstructions have been removed, continue the seat movement by pressing the appropriate button.
If no obstruction can be found, and seat movement cannot be carried out, contact a retailer/authorized repairer.