2023 Land Rover RANGE ROVER VELAR MIRRORS Owner Manual

2023 Land Rover RANGE ROVER VELAR MIRRORS

DOOR MIRRORS

• An amount of knock protection is designed into the door mirrors. If a door mirror is accidentally knocked inwards or manually folded inwards, the mirror head disengages from the folding mechanism. To re-engage the mechanism, fold, then unfold the mirror using the button.
• The door mirror heaters operate automatically, according to the external temperature and the heated rear screen operation.
• If the door mirrors are folded using the buttons, the mirrors do not unfold when the vehicle is unlocked. The mirror unfolds when the vehicle exceeds 25 mph (40 km/h). The door mirrors can be configured by a retailer/authorized repairer to automatically fold when the vehicle is locked, and unfold when it is unlocked. Power-folding is a vehicle-specific feature. The power-fold feature operates only if the vehicle’s speed is below 70 mph (113 km/h).
• The door mirrors can be adjusted for up to 5 minutes after the ignition is switched off, provided the driver’s door is not opened.

Press the appropriate button to select the relevant door mirror to be adjusted. The button’s LED indicator lamp illuminates to confirm which side is active. Use the joystick control to adjust the mirror’s glass.

1. Left door mirror adjustment.
2. Right door mirror adjustment.
3. Power-fold or unfold: Press both buttons simultaneously.

MIRROR DIP WHEN REVERSING

Mirror dip can be enabled or disabled via the Vehicle settings menu.

To access the Mirror Dip on Reverse settings:

1. Touch the settings icon¹ from any screen.
2. Touch the ALL soft key.
3. Touch Vehicle.
4. Touch Convenience.
5. Touch Mirrors.
6. Mirror Dip on Reverse: Toggle on or off.
7. Touch the exit icon², after selection, to return to the previously displayed screen.

Selecting Reverse (R) causes the door mirrors to automatically adjust, providing an improved viewing angle for reversing.

The dipped position of the door mirrors is a preset position. In R, the door mirrors can be adjusted and the new position can be saved.

When the vehicle is in R, press the memory save button (M). Select either memory 1, 2, or 3 to save the reverse mirror dip position to the corresponding memory. See SEAT POSITION MEMORY.

Three different reverse mirror dip positions can be saved. Use the memory recall feature to recall the saved positions.

When the gear selector is moved out of R, the door mirrors return to the previous position.

Settings icon.¹

Exit icon.²