Make sure that you have read and fully understood the following warnings before using any of the features in this section. Failure to observe cautions and warnings may result in vehicle damage, injury, or DEATH in the event of an accident.
MANUAL FRONT HEAD RESTRAINTS
WARNING
Make sure that you have read and fully understood the relevant warnings before using any of the features in this section. See HEAD RESTRAINTS SAFETY.
To adjust the manual front head restraints:
- To raise the head restraint, pull it upward until it clicks and locks into position.
NOTES
Do not try to raise the head restraint further than the third adjustment position.
- To lower the head restraint, press the button. Simultaneously press down on the head restraint.
To remove the head restraint, first move it to the fully raised position. Then:
- Press and hold the head restraint stem collars.
- With the aid of a second person, lift the head restraint out of the seatback.
WARNING
Always store a removed head restraint securely. In the event of an accident, an unsecured object could cause serious injury or death.To refit a head restraint, make sure it is facing in the correct direction. Insert the stems of the head restraint into the stem collars, and push the head restraint downward until at least the first click.
ELECTRIC FRONT HEAD RESTRAINTS
WARNING
Make sure that you have read and fully understood the relevant warnings before using any of the features in this section. See HEAD RESTRAINTS SAFETY.
To adjust the electric front head restraints:
- Use the switches on the side of the seat cushion to move the head restraint to the required position.
- Move the head restraint wings manually to the required position.
REAR HEAD RESTRAINTS
WARNING
Make sure that you have read and fully understood the relevant warnings before using any of the features in this section. See HEAD RESTRAINTS SAFETY.
To adjust the rear head restraints:
- To raise the head restraint, pull it upward until it clicks and locks into position.
- To lower the head restraint, press the button on the stem collar. Simultaneously press down on the head restraint.
- Press the button on the side of the head restraint to change the angle. Simultaneously move the head restraint to the required position.
WARNING
The rear head restraint must be in the upright position when the seat is occupied.
The rear head restraints can be removed, if required, e.g., to fit larger child seats.
NOTES
Two people are required to carry out this operation. To remove a head restraint, first move it to the fully raised position. Then:
- Press the release tag*, located below the stem collar. At the same time, press the button on the other stem collar.*To locate the release tag, press down on the seat material in the area shaded on the illustration.
- A second person is now required to lift out the head restraint.
WARNING
Always store a removed head restraint securely. In the event of an accident, an unsecured object could cause serious injury or death. To refit a head restraint, make sure it is facing in the correct direction. Insert the stems of the head restraint into the stem collars, and push the head restraint downward until at least the first click.