Make sure the following warnings have been read and fully understood before using adaptive cruise control or any of its features. Failure to use adaptive cruise control or any of its features safely could result in an accident, leading to serious injury or death.
The driver should remain alert and intervene, if necessary when adaptive cruise control is in operation.
The adaptive cruise control system may operate unexpectedly in certain conditions. For example:
When driving on a different line to the vehicle in front.
When a vehicle edges into the same lane as the vehicle being driven. The vehicle is only detected once it has moved fully into the same lane.
When entering or exiting a bend. Vehicles in front may not be detected.
When moving around a stationary vehicle. The detection beam may become uncertain as to which vehicle should be followed.
When the vehicle in front turns out of the same lane as the vehicle being driven. The detection beam may become uncertain as to which vehicle should be followed.
Adaptive cruise control allows the driver to set a cruising speed for the vehicle. The vehicle’s speed automatically reduces if a slower-moving vehicle is detected in the lane ahead. The system then maintains a constant gap to the vehicle ahead. If the system detects that the slower-moving vehicle is no longer present, it automatically raises the vehicle’s speed back to the set speed. ACC will bring the car to a stop when it is following a lead vehicle that decelerates to a stop. This causes the vehicle to also decelerate to a stop at a predetermined stop gap distance.
Adaptive cruise control comprises a number of different sub-features in order to operate effectively, including:
Push the LIM switch on the steering wheel controls to toggle between speed limiter and adaptive cruise control functions. See ADAPTIVE CRUISE CONTROL.
The following icons relate to adaptive cruise control functionality:
The instrument panel displays a green lamp to confirm that follow mode has detected a target while adaptive cruise control is enabled.
The instrument panel displays a message if a fault occurs in the adaptive cruise control system or in any of its sub-features. If this occurs, adaptive cruise control does not operate. Consult a retailer/authorized repairer at the earliest opportunity.
Roll the rocker switch upwards to select SET+.
Roll the rocker switch downwards to select SET-.
Push the speed control rocker switch inwards to select RES (resume).
Roll the set rocker switch (1) upwards to set a desired cruising speed. The vehicle’s cruising speed is set at the speed it was traveling when the switch was pressed. Use the gap control switches (4) and (5) to adjust the set gap between the vehicle in front when follow mode is engaged. See FOLLOW MODE.
The instrument panel displays a green information lamp to inform the driver that adaptive cruise control is engaged.
The steering wheel icon also illuminates green when adaptive cruise control is active.
Clear front bumper/windshield Driver Assistance feature performance limited may be displayed if adaptive cruise control is in standby and obstruction is detected over a period of time. If the message is displayed, clear any obstruction (e.g. ice/ mud in front of the manufacturer badge or the windshield). Seek retailer/authorized repairer assistance if the message persists. The instrument panel may also display a Clear front bumper/windshield Driver Assistance feature performance is limited temporarily if the radar sensor or camera’s vision is disrupted for a long period. For example, in poor weather conditions, when traveling through a tunnel, or in complex traffic situations.
Adaptive cruise control does not operate if:
Adaptive cruise control automatically deactivates, but does not clear its memory, when:
Adaptive cruise control automatically deactivates, and its memory is cleared, when:
The amount of braking applied by the adaptive cruise control system is limited. The system sounds an audible warning and the instrument panel displays a message if the system’s braking limits are reached. The driver should intervene immediately and apply a higher level of braking force using the brake pedal.
Adaptive cruise control cancels when the brake pedal is pressed, or if the vehicle becomes stationary. Press the RES switch on the steering wheel controls to resume adaptive cruise control operation. See ADAPTIVE CRUISE CONTROL.
Pressing the accelerator pedal inhibits adaptive cruise control braking. The follow mode warning lamp extinguishes to confirm the system has been overridden. See FOLLOW MODE (GREEN).
Adaptive cruise control operation resumes when the accelerator pedal is released.
When adaptive cruise control identifies a vehicle in the lane ahead, it automatically enters follow mode. Adaptive cruise control adjusts the vehicle’s speed by controlling acceleration and braking to maintain a set gap to the vehicle ahead.
The instrument panel displays an information lamp to confirm that follow mode has detected a target vehicle.
The instrument panel may also display the follow mode gap setting and a representation of the targeted vehicle.
If the turn signals are used, follow mode may reduce the gap to the vehicle ahead in anticipation of a maneuver. If a maneuver is not carried out, follow mode restores the previous gap setting after a few seconds.
The follow mode gap to the vehicle ahead can be adjusted. See CHANGING THE FOLLOW MODE GAP.
Switching follows mode off allows the driver to take control of the vehicle’s speed. When follow mode is switched off, the adaptive cruise control system does not provide any vehicle braking. Vehicle braking must be applied by the driver.
To switch follow mode off, press and hold the gap reduce button (4). The cruise control icon illuminates to confirm the feature has been switched off.
To switch follow mode back on, press and release the gap increase button (5) button. If adaptive cruise control is active and tracking a vehicle, the follow mode off white warning lamp extinguishes. The adaptive cruise control icon illuminates in gray (standby) or green (active) to confirm that the feature has been switched back on. The previous follow mode gap setting is resumed.
Follow mode has four different gap settings. Gap 3 is the default gap setting when the vehicle is switched on.
To decrease the follow mode gap, press the follow mode gap decrease button (4) on the steering wheel. To increase the follow mode gap, press the follow mode gap increase button (5) on the steering wheel.
The instrument panel displays a vehicle image with a number of bars when the follow mode gap is adjusted. The number of bars displayed in front of the vehicle image reflects the follow mode gap setting.
Follow mode maintains a constant gap to the vehicle ahead until:
Queue assist enhances the adaptive cruise control follow mode feature. See FOLLOW MODE.
Queue assist operates at lower speeds than follow mode, allowing the feature to be used in slow-moving lines of traffic.
When the targeted vehicle slows to a standstill, queue assist brings the vehicle to a standstill. When the targeted vehicle moves off, briefly press the accelerator pedal, if safe to do so. Queue assist now maintains a constant gap to the vehicle ahead.
If the vehicle is stationary, queue assist also applies the Electric Parking Brake (EPB), including when:
Adaptive cruise control deactivates when the EPB is applied.
Steering assist helps the driver keep the vehicle in the center of the lane in which it is traveling. The system does this by making steering adjustments.
Press the button on the left side of the steering wheel (1) to activate the steering assist. Press the button a second time to switch the feature off. When active, the instrument panel displays steering assist system status.
If the driver’s hands are removed from the steering wheel, the vehicle presents a series of visual and audible warnings. Steering assistance is stopped if the warnings are ignored.
Under normal circumstances, if the driver uses the turn signals, steering assistance stops in the direction indicated.
Steering assist does not operate if:
Steering assist operates with a reduced level of performance and accuracy if:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada Standard IC – RSS-210. Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
| USA FCC ID: | L2C0038TR |
| Canada IC: | 3432A-0038TR |
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…