| Maximum permissible towing weights | Variant | lb (kg) |
|---|---|---|
| Maximum tow mass of an unbraked trailer | All vehicles | 1 653 (750) |
| Maximum tow mass | 2.0L gasoline Plug-in Hybrid Electric Vehicle (PHEV) | 5 511 (2 500) |
| SVR vehicles | 6 613 (3 000) | |
| All other vehicles | 7 716 (3 500) | |
| Tongue weight (Certified) | 2.0L gasoline PHEV | 220 (100) |
| SVR vehicles | 264 (120) | |
| All other vehicles | 330 (150) | |
| Maximum tongue weight (Design)¹ | All vehicles | 771 (350) |
| Tow ball-mounted accessories | All vehicles | 147 (66.8) |
Make sure to never exceed the Gross Vehicle Weight (GVW), the Gross Train Weight (GTW), or the front and rear axle weights. See WEIGHTS.
Include the trailer’s tongue weight when calculating the GVW and the rear axle weight.
When calculating the vehicle’s rear axle weight, the vehicle’s payload weights must also be considered. Include the combined weights of all the rear passengers, the loadspace, the roof rail, accessory equipment, and the trailer tongue weight. The combined weights must never exceed the GVW or the maximum weights for the front and rear axles.
Make sure to observe and comply with the legal requirements for the area in which the vehicle is traveling.
When towing, make sure that safety chains are attached to the correct locations, as illustrated.
The tow hitch receiver is an available towing option for this vehicle. The fitting of a tow hitch is required before towing. See TOW HITCH.
Never leave the tow hitch loose in the vehicle. In the event of an accident, or during heavy braking, it can become a projectile, potentially causing serious injury or death.
The fitting of a tow hitch is required for towing with the class IV tow hitch receiver.
The following tow hitch dimensions must be adhered to:
If required, consult a retailer/authorized repairer for the latest information.
The Trailer Stability Assist (TSA) system does not operate in the event of the trailer jack-knifing.
The TSA system does not operate when Dynamic Stability Control (DSC) is switched off.
The TSA system performance may reduce when traveling on slippery surfaces. When a trailer is correctly attached to the vehicle, the TSA system automatically detects when trailer sway is developing. When active, the TSA system gradually reduces the vehicle’s speed by reducing engine power and applying the brakes to help regain stability control.
Only connect approved electrical circuits, which are in good condition, to the vehicle’s tow hitch receiver socket. Failure to do so may result in damage, or affect the correct operation of the vehicle’s electrical systems.
Only use electrical equipment that requires a 12V supply from the vehicle.
When a trailer’s electrical connection is made and the vehicle’s turn signals are used, the trailer warning lamp flashes in time with the turn signals. See TRAILER TURN SIGNALS (GREEN).
In the event that the vehicle’s turn signals are used and the lamp does not flash, check the trailer’s electrical connection. Take appropriate action to make sure that the trailer’s turn signals are functioning correctly.
The information in the following table helps to confirm if a trailer or a lighting board is compatible for use with this vehicle. If these conditions are not met, the vehicle will not detect the electrical connection of a trailer or a lighting board.
| Function | Minimum load | Maximum load | ||
|---|---|---|---|---|
| Amps | Watts | Amps | Watts | |
| Turn the signal lights left side. | 1.75 | 21 | 5 | 60 |
| Turn the signal lights on, the right side. | 1.75 | 21 | 5 | 60 |
| Side marker and tail lights. | – | – | 5 | 60 |
| Reverse lights. | – | – | 5 | 60 |
| Ignition power feed. | – | – | 15 | 180 |
Some vehicles may have the provision for the connection of an electric trailer brake module. The information in the following table helps to confirm if an electric trailer brake module is compatible for use with these vehicles. If in doubt contact a retailer/authorized repairer for confirmation.
| Function | Maximum amps load |
|---|---|
| Brake signal. | 2 |
| The trailer brake module is connected to the electrical socket on the tow hitch receiver. | 30 |
Never exceed the maximum weights for either the vehicle or the trailer. Doing so can cause accelerated wear and damage to the vehicle, and adversely affect the vehicle’s stability and braking. The result can also cause a loss of control and increased braking distances, potentially leading to a rollover or crash, causing serious injury or death.
To preserve the vehicle’s handling and stability, only fit approved towing accessories. Failure to do so can potentially cause a loss of control, resulting in a rollover or a crash, causing serious injury or death.
Never use the vehicle’s towing eyes or lashing points to tow a trailer, as they have not been designed for this purpose. Doing so will cause serious vehicle damage, which in turn may result in a crash, potentially causing serious injury or death.
The use of weight distribution hitches is not recommended. Using weight distribution hitches can potentially cause serious damage to the vehicle.
A reduction in the performance of the Air Conditioning (A/C) system is normal under high-load towing conditions.
Make sure that the towing vehicle and the trailer are being used in accordance with the vehicle and trailer manufacturers’ recommendations and any applicable legislation. See WEIGHTS and TOWING WEIGHTS.
The touchscreen can display a rear-view image to assist with the reversing of the vehicle with a trailer attached. See SURROUND CAMERA SYSTEM.
When towing a trailer weighing more than 4 409 lb (2 000 kg), a smoother pull away from standstill is achieved with the transfer case engaged in a low range. Change to high range when the vehicle is moving. See SELECTING HIGH AND LOW RANGE.
To avoid overheating the transmission, it is not advisable to tow heavy trailer loads at speeds of less than 20 mph (32 km/h) in a high range. Select low range instead.
The driver is always responsible for calculating the correct distances and maneuvering the vehicle to a trailer’s tow hitch. Failure to do so may result in damage to the vehicle and trailer.
The hitch assist system displays an approximation of the vehicle’s tow hitch position and the required trajectory to a trailer’s tow hitch.
The accuracy of the hitch assist system is affected by the height of the trailer’s tow hitch compared to the height of the vehicle’s tow hitch. The maximum height difference should be no more than 1.2 in (3 cm).
The hitch assist system displays a rear-view guidance image to aid the process of reversing the vehicle to a trailer’s tow hitch.
Operate as follows:
As the vehicle closes to within 600 mm of the trailer’s tow hitch, the zoom icon illuminates. If required, touch the zoom icon for a more detailed view.
Only use towing equipment that is approved by the vehicle manufacturer. Non-approved towing equipment may adversely affect the accuracy and performance of other vehicle features. The potential result can lead to vehicle damage and personal injury. Use the tow assist feature when reversing the vehicle while towing a trailer. The touchscreen displays colored trajectory lines to indicate the predicted direction path of the trailer. Dependent on the vehicle’s specification, the camera images can also be displayed on the touchscreen.
The tow assist feature uses the vehicle’s rear camera and a target sticker to constantly monitor the position of a connected trailer. The target sticker must be affixed to the trailer in the same orientation as illustrated. If required, consult a retailer/authorized repairer to acquire a target sticker. To display the correct sticker location for the trailer, enable the tow to assist feature. Follow the on-screen instructions for the new trailer configuration menus on the touchscreen.
The tracking target sticker must be affixed at a distance of between 3.3 ft (1 m) and 6.6 ft (2 m) from the rear of the vehicle. The tracking target sticker must be affixed to a flat vertical surface that is parallel to the rear of the vehicle. The tow assists feature does not operate if these conditions are not met. Different light conditions between the vehicle’s rear camera and the trailer’s target sticker can affect the operation of the tow assist feature. In this event, the touchscreen extinguishes the displayed trajectory lines, and the operation of the tow assist feature is suspended. Normal tow assist operation resumes when the light levels are no longer different.
Some examples of different light conditions are as follows:
To enable the tow to assist feature, touch the tow-assist icon on the CAMERAS menu screen. See SURROUND CAMERA SYSTEM.
Alternatively, the tow assist feature can also be enabled via a pop-up menu, if the vehicle detects an electrical connection at the tow bar socket.
The correct process for making an electrical connection is as follows:
If the ignition system is switched on during the connection, opening and closing the driver’s door enables the vehicle to detect the connection.
Touch the alternative soft key to cancel the tow assist feature, if connecting accessory equipment or a trailer without a target sticker.
With the tow assist feature enabled, the touchscreen guides the driver through a set of menus. If applicable, select the trailer’s existing profile. Alternatively, create a profile for a new trailer. In this event, the touchscreen guides the driver through a series of configuration options, including the correct position to affix a target sticker.
The driver is always responsible for detecting obstacles, and for estimating both the trailer and the vehicle’s distance from the obstacles when maneuvering. Failure to do so can result in serious injury or death.
The driver must always control the vehicle’s speed via normal driving operation of the accelerator pedal and the brake pedal. Failure to do so can result in serious injury or death.
Using towing equipment approved by the vehicle manufacturer is recommended. Non-approved towing equipment may adversely affect the accuracy, performance, and safety of the vehicle’s towing systems.
The advanced tow assist system does not operate if the tailgate is open, or unlatched. In this event, the touchscreen displays a message.
The advanced tow assist system does not operate if the All Terrain Progress Control (ATPC) system is enabled. The advanced tow assist system automatically operates the steering when the vehicle is driven in reverse with a connected trailer. The driver only needs to operate the steering wheel to override the automatic steering operation. The touchscreen displays the driver’s intended trajectory path to reverse the vehicle with a trailer connected. The touchscreen also displays the vehicle’s camera views. Different light conditions between the vehicle’s rear camera and the trailer’s target sticker can affect the operation of the advanced tow assist system. In this event, the touchscreen extinguishes the displayed trajectory lines and the advanced tow assist system automatically disables. If required, the advanced tow-assist selection process has to be carried out again.
The advanced tow assist icon is only available for selection if the trailer is correctly connected and calibrated, as described in the tow assist topic. See TOW ASSIST.
The advanced tow-assist selection process is as follows:
If R is not selected, the touchscreen displays a message.
The advanced tow assists icon displays on the CAMERAS menu screen. Touch the icon to enable the system. See SURROUND CAMERA SYSTEM.
If the advanced tow assist icon is not displayed, the touchscreen displays a message. In this event, confirm that the trailer is correctly connected and calibrated.
When driven, the vehicle automatically steers so that the reversing trailer follows the intended steering trajectory path. If the driver operates the steering wheel to override the automatic steering operation, the touchscreen displays a canceled message.
The driver must control the vehicle’s speed via the use of the accelerator and brake pedals.
The touchscreen displays two trailer images:
The outline image changes color to indicate the current status of the reversing trailer:
The maximum operational speed for the advanced tow assist system is 5.6 mph (9 km/h). If this speed is exceeded, the advanced tow assist system automatically disables and the touchscreen displays a message.
To manually override and disable the advanced tow assist system, either:
The touchscreen displays a canceled message and the advanced tow assist icon extinguishes to confirm deselection.
Do not exceed the Gross Vehicle Weight (GVW), maximum rear axle weight, maximum trailer weight, or tongue weight. Exceeding any of these limits could cause instability and a loss of control, potentially resulting in serious injury or death.
Do not loop the safety chains over the tow hitch. The chains may slide off, preventing correct operation in the event that a connected trailer becomes detached when towing. Failure to correctly connect breakaway chains can potentially result in serious injury or death.
Make sure to perform the following essential towing checks:
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…