2022 Land Rover Range Rover Velar Steering Wheel
ADJUSTING THE STEERING WHEEL
Never adjust the steering column while the vehicle is in motion. Doing so may cause a loss of control, potentially resulting in an accident.
Do not use steering wheel-mounted security devices on vehicles with electrically adjustable steering columns. Movement of the steering column in entry or exit mode could result in damage to the vehicle or possible serious injury or death to the occupant.
- Manual adjustment: Move the locking lever, located under the column downward to unlock. Move the steering column up, down, in, or out, to the desired position. Move the lever fully up to re-lock the column.
- Electric adjustment: Move the control up or down to adjust the tilt or height.Move the control forward or rearward to adjust reach.
ENTRY AND EXIT MODE
With the steering column control in the AUTO position, the steering column and driver’s seat move to provide easier entry and exit from the vehicle. On opening the driver’s door, the system raises the steering column to the highest position. The system lowers the driver’s seat to a lower position, assisting with an exit from the vehicle. When the driver’s door is closed and the ignition is switched on, the system returns the driver’s seat and steering column to the previous positions.
If the driver’s seat or steering column is adjusted during entry or exit operation, automatic movement stops. To prevent automatic movement of the driver’s seat and steering column, turn the control clockwise to the manual position.
If the steering column control is moved away from AUTO when the driver’s seat and steering column are in the exit position, the system resets. The driver’s seat and steering column move back to their previous positions when the driver’s door is closed and the ignition is switched on.
POWER STEERING
- The instrument panel displays a warning message and a warning lamp to indicate a fault with the power steering system.
- Power assistance may be reduced to protect the system if overheating is detected.
- Overheating can be caused by excessive steering inputs or high ambient temperatures.
- Full steering assistance should return when the system has cooled.
- The steering wheel may vibrate to protect against freezing caused by water around the steering system.
- If full steering assistance does not return, consult a retailer/authorized repairer.
HEATED STEERING WHEEL
To activate the heated steering wheel, press the button. Press again to switch it off.