Never start the engine and leave it running when the vehicle is in an enclosed space. Exhaust gases are poisonous and can cause unconsciousness and death if inhaled.
If the engine fails to start, do not continue cranking, as this discharges the battery. The catalytic converter may also be damaged due to unburnt fuel passing through the exhaust.
The smart key may not be detected if placed within a metal container or shielded by a device with a back-lit LCD screen. For example, a smartphone, or laptop, including when inside a laptop bag, or a games console. Keep the smart key clear of such devices when attempting keyless entry, an engine start, or the engine start backup procedure.
On some engine variants, the engine automatically shuts down if left running for a prolonged period. Before the engine shuts down, the instrument panel displays a warning message. The warning message provides an opportunity for the driver to press the brake pedal to keep the engine running.
Make sure the relevant safety warnings have been read and understood before starting the vehicle. See STARTING SAFETY.
To start the engine:
Once the engine starts, release the brake pedal, if it is safe to do so.
Gasoline engines only: When starting the engine, the idle speed may rise. The rise in idle speed helps the engine reach its optimum operating temperature quickly, improving fuel efficiency.
Diesel engines only: The delay period before cranking begins is longer in low ambient temperatures. The extended delay period is due to extended glow plug operation. During this extended delay period, the brake pedal must remain firmly pressed.
It is not possible to start a Plug-in Hybrid Electric Vehicle (PHEV) if it is plugged into a charging point and charging. The vehicle is also locked in P while charging. The instrument panel displays the message Disconnect charge cable before starting the vehicle to inform the driver that starting has been inhibited. See DISCONNECTING A CHARGING CABLE. Before leaving the vehicle, make sure that safe driver exit conditions exist. See DRIVER EXIT.
Failure to leave the vehicle in a safe condition may cause an accident, leading to injury or death.
For vehicles with a diesel engine, a different starting procedure may be required if the vehicle has run out of fuel. See DIESEL ENGINES.
Before switching off the engine, it is recommended that the vehicle is stationary. Make sure the Electric Parking Brake (EPB) is applied and the transmission is in Park (P).
Press and release the engine START/STOP button. The engine now stops. The vehicle’s ignition system also switches off.
To switch off the engine while the vehicle is moving:
When the vehicle is moving it is not advisable to switch off the engine. Driving with due care and attention remains the driver’s responsibility. Always drive in a manner that is safe for the vehicle, its occupants, and other road users. Driving without due care and attention greatly increases the risk of an accident.
If a situation arises where engine switch-off is urgent, the following procedure applies:
With either method, the instrument panel displays the message Engine Stop button pressed.
To switch on the vehicle’s ignition system without starting the engine:
If the brake pedal is pressed when the engine START/STOP button is pressed, the engine starts.
If the engine is switched off while the vehicle is moving, a rolling restart can be initiated. Select Neutral (N) and press the engine START/STOP button.
The engine START/STOP button is inhibited for 2 seconds after the engine has been switched off.
The engine start backup feature is required to disarm the alarm and start the engine if either of the following occurs:
The engine starts backup feature can only be used when the instrument panel displays Place Smart Key As Shown and Press Start Button.
To carry out the engine start backup procedure:
There are markings on the steering column to help locate the correct position.
Once the engine starts, release the brake pedal, if it is safe to do so.
If the smart key is not recognized, or the engine fails to start, consult a retailer/authorized repairer.
Seek qualified assistance if the vehicle has been in a recent collision and the engine fails to start when the START/STOP button is pressed. Damage to the vehicle may have occurred.
If the engine fails to start, and a valid smart key is inside the vehicle, a check must be made to determine the cause. To do this:
Alternatively, if the engine fails to start, the alarm system may need to be reset. To reset the alarm system, lock and unlock the vehicle. See UNLOCKING THE VEHICLE.
If the engine still fails to start, consult a retailer/authorized repairer.
If the engine persistently fails to start, carry out the following steps:
The fitting of an engine pre-heater does not eliminate the need for antifreeze. Damage may be caused to the engine if the correct mixture of antifreeze is not present. Engines are more difficult to start when the ambient temperature is very low. In geographical areas where temperatures below 14°F (-10°C) are experienced frequently, it is advisable to fit an engine pre-heater. The pre-heater has an insulated connector at the front of the vehicle, which is connected to the main supply using a suitable extension cable. The pre-heater can remain in use overnight if required. Typically, an engine pre-heater uses between 0.4 and 1 kWh. For further information, consult a retailer/authorized repairer.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…