2022 Land Rover Range Rover Velar Cruise Control Owners Manual

Contents hide

1 2022 Land Rover Range Rover Velar Cruise Control

2022 Land Rover Range Rover Velar Cruise Control

CRUISE CONTROL SAFETY

Make sure the following warnings have been read and fully understood before using cruise control. Failure to use cruise control safely could result in an accident, leading to serious injury or death.

WARNING

The driver must always make sure that a safe speed is maintained within the speed limit, taking into account traffic and road conditions. Driving at unsafe speeds increases the risk of an accident.

WARNING

In certain conditions, such as a steep downhill slope, the vehicle’s speed may exceed the set cruising speed. Driver intervention may be required. Driving at speeds above the set cruising speed may infringe on local laws.

WARNING

Do not use cruise control in heavy traffic, or conditions where a constant road speed cannot be safely maintained. For example, cruise control should not be used on roads that are winding, wet with rain or snow, slippery, or unpaved.

USING CRUISE CONTROL

WARNING

Make sure the relevant safety warnings have been read and understood before driving the vehicle. See CRUISE CONTROL SAFETY.

SET+.
–.
RESUME.
CANCEL.
LIM.

Cruise control allows the vehicle to automatically maintain a set vehicle speed. Controls mounted on the steering wheel are used to operate the system. The driver can also intervene, at any time, by using the brake or accelerator pedals.

NOTES

Do not use cruise control when driving off-road.

While driving at the desired speed, press the SET+ button to activate cruise control. The instrument panel displays an information lamp to confirm that the system is operational. The cruise control icon on the steering wheel controls also illuminates to confirm that the system is operational. To increase the set speed, press the SET+ button. A single press of the button raises the vehicle’s speed by 1 mph (2 km/h). Alternatively, press the accelerator pedal to increase the set speed. When the new desired speed is reached, press the SET+ button.

NOTES

Cruise control cancels if the accelerator pedal is pressed to override the system for more than 5 minutes.
Press the – button to lower the set speed.
A single press of the button lowers the vehicle’s speed by 1 mph (2 km/h).
Press the CANCEL button to cancel the cruise control.
The set speed is retained in the system’s memory until the vehicle is switched off.
Press the RESUME button to resume the set speed from the system’s memory.

WARNING

The RESUME button should only be used if the driver is aware of the set speed and intends to return to it. Pressing the RESUME button when not aware of the set speed may lead to a loss of control of the vehicle.

CRUISE CONTROL LIMITATIONS

Cruise control:

Cannot be set when the vehicle is traveling at speeds below 20 mph (32 km/h).
Remains active until the vehicle’s speed drops below 15 mph (24 km/h).

Cruise control does not operate when:

The speed limiter or adaptive speed limiter is in operation. When the vehicle is first switched on, the vehicle reverts to whichever system was used previously. Press the LIM button to switch between cruise control and the speed limiter. See USING CRUISE CONTROL.
The brake pedal is pressed.
The gear selector is moved to Neutral (N) or Reverse (R).
The Electric Parking Brake (EPB) is applied.
The Anti-lock Braking System (ABS) requests a cruise control cancellation.
Hill Descent Control (HDC) is activated.
The sand, mud ruts, or rock crawl driving programs are activated.