The 4x4i extra feature allows access to 4 Wheel Drive (4WD) information and guidance features for off-road driving.
Select Off-Road Information from the 4x4i extra feature. See EXTRA FEATURES.
The touchscreen displays the following information:
The current automatic transmission gear selection.
Vertical bar images, at each wheel, indicate the current suspension movement for vehicles with an electronic air suspension system.
The displayed front wheels move to indicate the current steering angle.
The differential lock symbols display increments to indicate the current status of the locking torque applied to the vehicle’s driveline.
In the event of wheel spin, a colored arrow displays on the wheel that loses traction. A yellow arrow indicates a low level of wheel spin. An orange arrow indicates a medium level of wheel spin. A red arrow indicates a high level of wheel spin.
Further information on off-road driving, including tips and driving techniques, can be found at: www.landrover.com.
To display the vehicle dimensions on the touchscreen, select Vehicle Dimensions from the EXTRA FEATURES menu. See EXTRA FEATURES.
Touch the alternative icon at the bottom of the screen to view other dimensions.
The low traction launch feature helps to further enhance low speed maneuvering and pulling away from a standstill, in adverse conditions.
Operation of the low traction launch feature is further enhanced if the grass gravel snow driving program is enabled. See GRASS GRAVEL SNOW.
The low traction launch feature also operates if either the automatic (AUTO) driving program or the comfort driving program is selected. See COMFORT and TERRAIN RESPONSE OPERATION.
Select Low Traction Launch from the 4x4i extra feature on the touchscreen. Follow the on-screen instructions to meet the required vehicle conditions. Touch the Activate soft key to enable the low traction launch feature. See EXTRA FEATURES.
Alternatively, the touchscreen displays a low traction launch pop-up menu, if the following conditions are met and the grass gravel snow driving program is selected:
In this event, select the required Yes or No soft key from the pop-up menu. Alternatively, touch the Do not show again soft key to disable the pop-up menu. The pop-up menu is also enabled and disabled via the 4x4i settings. See SYSTEM SETTINGS.
The low traction launch feature only operates at vehicle speeds below 19 mph (30 km/h).
Low-speed maneuvers, and pulling away from a standstill, are complete when the vehicle’s speed reaches 19 mph (30 km/h). The low traction launch feature automatically disables.
The low traction launch feature also disables if:
Drive assist is a surround camera feature that assists the driver with forwarding vehicle guidance while driving off-road. The drive assists feature displays the area directly ahead of the vehicle that may not be visible to the driver.
Select Drive Assist from the 4x4i extra feature. See EXTRA FEATURES.
The drive assist feature may not operate correctly in certain conditions, for example:
The drive assist feature disables if Reverse (R) is engaged. The touchscreen displays a rear-view camera image.
The drive assist feature is suspended if the vehicle’s speed exceeds 19 mph (30 km/h). The touchscreen displays a warning message. Normal operation resumes when the vehicle’s speed is less than 19 mph (30 km/h).
The touchscreen camera view displays three images: one from the front camera and one from each door mirror camera. Touch either of the door mirror camera views for a two image display, i.e., the selected door mirror camera view and the front camera view. Touch the return icon to return to the three image display.
Select Wade Sensing from the 4x4i extra feature. See EXTRA FEATURES.
The wade sensing feature cannot be enabled if the All Terrain Progress Control (ATPC) system is currently enabled. See USING ALL TERRAIN PROGRESS CONTROL (ATPC).
Use the 4X4i SETTINGS menu screen to configure the units displayed in the wade sensing feature. Select the Meters or Feet soft key, as required. See SYSTEM SETTINGS.
If the detected water level approaches the vehicle’s maximum wading depth, the touchscreen and the instrument panel display warning messages. Audible warning tones also sound.
If the wade sensing feature limitations are exceeded, the touchscreen image illuminates gray and the water level no longer displays.
The wade sensing feature does not operate when the vehicle’s speed exceeds 6 mph (10 km/h) or the current gradient exceeds 10°. Operation automatically resumes when the vehicle’s speed returns to less than 6 mph (10 km/h) or the current gradient is less than 10°. If the vehicle’s speed exceeds 19 mph (30 km/h) for 30 seconds, the wade sensing feature automatically switches off.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…