Make sure the following warnings and cautions have been read and fully understood before using the navigation system.
Failure to use the navigation system safely could result in an accident, leading to serious injury or death.
The navigation system is not a substitute for driving safely with due care and attention, Road Traffic Regulations must always be observed. Drivers should not assume that a feature will correct errors in judgement when driving.
The driver is responsible for staying alert, driving safely, and for being in control of the vehicle at all times, relative to the prevailing conditions. The driver is responsible for determining the safety of the route suggested by the navigation system. The navigation system may not function properly in all circumstances.
Do not adjust the touchscreen controls, or allow the system to distract the driver, while the vehicle is moving.
Make sure the relevant safety warnings have been read and understood before operating the touchscreen. See TOUCHSCREEN SAFETY.
During any map update, the USB drive must not be removed, or the ignition switched off, before the update is complete. Doing so cancels the map update and potentially leaves the system without any available map data.
Navigation instructions is by map and turn information displayed on the touchscreen, instrument panel, and in the Head-Up Display (HUD). Navigation instruction can also be complemented by voice guidance.
The touchscreen is used to control the navigation system via menus and map displays. See USING THE NAVIGATION SYSTEM.
The navigation system uses a selection of Connected Navigation features to enhance the navigation system. See CONNECTED NAVIGATION.
The vehicle’s instrument panel can be set up to display navigation instructions and maps. See INSTRUMENT PANEL.
The HUD can also be set up to display turn instructions. See HEAD-UP DISPLAY (HUD).
The navigation system can also be controlled via voice commands. See NAVIGATION VOICE CONTROL.
Under certain conditions, it is possible for the vehicle’s position displayed on the map screen to be incorrect. Incorrect vehicle positioning may happen when:
GPS signals may occasionally be interrupted due to physical barriers, such as roads under raised highways and tunnels.
Make sure the relevant safety warnings and cautions have been read and understood before operating the navigation system. See NAVIGATION SAFETY.
To access the navigation system, touch the navigation soft key on the touchscreen’s HOME menu. Alternatively, select the navigation icon. See TOUCHSCREEN HOME MENU.
A first-time user should set up personal preferences in the NAVIGATION SETTINGS menu. Personal preferences include settings for managing which Connected Navigation features can connect to the internet when on the home network or while roaming. The settings are applied whenever navigation is used. See NAVIGATION SETTINGS.
When navigation is selected and the vehicle is stationary, the navigation system displays a map view of the current vehicle position. The touchscreen displays a side panel containing quick access tiles.
The quick access tiles act as shortcuts, to allow quick access to certain navigation system functionality.
The quick access tiles are hidden when the vehicle’s speed reaches a predetermined level. The quick access tiles return only when the vehicle is stationary for a period of time, and a route is not set. If required, the options can be accessed via the NAVIGATION SETTINGS menu. See NAVIGATION SETTINGS .
If the navigation system is started when the vehicle’s speed is already above the predetermined level, the quick access tiles do not display.
Control the navigation system as follows:
COMMUTE MODE. See COMMUTE MODE .
RECENT DESTINATIONS.
FUEL FINDER. See FUEL FINDER.
HOME.
HELP TOPICS. See HELP TOPICS .
LICENSE INFORMATION. See NAVIGATION SETTINGS .
Internet connectivity is required for Traffic and Satellite map views.
When the vehicle is in motion and no active route is selected, an assistance map is displayed.
Make sure the relevant safety warnings and cautions have been read and understood before operating the navigation system. See NAVIGATION SAFETY .
When displayed, touch the navigation menu icon to access the NAVIGATION MENU.
Some of the options listed are only available when a route has been selected.
When signed in to an InControl navigation account, destinations can be automatically synchronized. Destinations are synchronized between the vehicle, the internet, and the Route Planner smartphone app. See NAVIGATION PROFILE , INCONTROL NAVIGATION ACCOUNT , and PLANNING ROUTES AND DOOR TO DOOR ROUTING .
The address entry icon displays only, when the one box search bar or Search soft key is touched.
Make sure the relevant safety warnings and cautions have been read and understood before operating the navigation system. See NAVIGATION SAFETY .
When displayed, touch the address entry icon to enter a detailed address.
Country, State, or Province.
City, Town, or Zip code: Previous entries and narrowed search results are displayed. Select the required entry and touch Ok.
Street name, Number, or Intersection, if applicable: Previous entries and narrowed search results are displayed. Select the required entry and touch Ok.
The navigation system calculates all the routes, based on the selected route preferences, e.g., avoiding toll roads or ferries. The route preferences can be adjusted while setting the destination, if required, touch the Route preferences soft key, when displayed.
An address or a Point Of Interest (POI) can be added as a waypoint after a destination has been selected. See EDIT ROUTE.
Previous entries, or search results as they are narrowed, are displayed on the touchscreen, behind the keyboard. If required, touch the hide keyboard icon¹ for better access to the displayed results.
Hide keyboard icon¹.
Make sure the relevant safety warnings and cautions have been read and understood before operating the navigation system. See NAVIGATION SAFETY .
To search for a place name, category, or address:
Touch the hide keyboard icon¹ to view the search results. Touch the text box to continue typing.
The navigation system calculates all the routes, based on the selected route preferences, e.g., avoiding toll roads or ferries. The route preferences can be adjusted while setting the destination, if required, touch the Route preferences soft key, when displayed.
An address or POI can be added as a waypoint after a destination has been selected. See EDIT ROUTE.
If a route is already active, the following list of search areas are available from the drop-down menu icon²:
The selected route must include one or more waypoints for this option to be available.
Previous entries, or search results as they are narrowed, are displayed on the touchscreen, behind the keyboard. If required, touch the hide keyboard icon¹ for better access to display results.
Hide keyboard icon.¹
Drop-down menu icon.²
Make sure the relevant safety warnings and cautions have been read and understood before operating the navigation system. See NAVIGATION SAFETY .
To search for Points Of Interest (POIs):
Fuel Station
Fuel stations can be sorted by the price of the fuel.
Eat & Drink
Parking Facility
ATM/Bank/Exchange
Public Toilet/Rest Area
Shopping
Going Out
Leisure & Outdoor
Accommodation
Car Dealer/Repairer
Hospital or Healthcare Facility
Airport
Transport.
The navigation system calculates all the routes, based on the selected route preferences, e.g., avoiding toll roads or ferries. The route preferences can be adjusted while setting the destination, if required, touch the Route preferences soft key, when displayed.
An address or POI can be added as a waypoint after a destination has been selected. See EDIT ROUTE.
The following details and options may also be available:
If the vehicle is connected to the internet, the search function can be performed using cloud-based information. The connected feature settings can be enabled and disabled via the NAVIGATION SETTINGS menu. See NAVIGATION SETTINGS .
If a route is already active, the following list of search areas is available from the drop-down menu icon¹:
The selected route must include one or more waypoints for this option to be available.
Drop-down menu icon.¹
Make sure the relevant safety warnings and cautions have been read and understood before operating the navigation system. See NAVIGATION SAFETY .
When a route has been selected, the navigation system displays a guidance map.
When auto-zoom is enabled, the map automatically zooms in when the vehicle is traveling at slow speeds and zooms out when traveling at higher speeds.
Auto-zoom can be enabled and disabled via the NAVIGATION SETTINGS menu. See NAVIGATION SETTINGS .
The navigation system can be viewed from the rear screens and operated via the rear screen’s remote.
The navigation features available on the rear screens are different from the front touchscreen.
Rear seat passengers can monitor the selected route, e.g., ETA, distance to destination, etc., and view or suggest new locations.
To view the navigation map on a rear screen, select the home button on the remote control. Use the cursor controls to select Navigation. Press the OK button to confirm.
To view the navigation menu, press the OK button again. Use the cursor controls to select Search, Browse map, or Settings.
Select Search, to display a list of options for selecting a new location. After selecting a new location, select To Driver. The driver receives a prompt on the front touchscreen to accept or refuse the selection. See REAR SEAT REMOTE CONTROL and REAR SEAT SCREENS OVERVIEW.
To view the NAVIGATION SETTINGS menu:
The following options are available:
Edit profile: Edit or set up a navigation profile. See NAVIGATION PROFILE .
Connected feature settings: Manage and configure the navigation-connected features, mobile data, and roaming usage.
Map features: Enable or disable from the following:
– POIs.
– Landmarks.
– Traffic flow.
Auto-zoom: Enable or disable auto-zoom. See MAP AUTO ZOOM.
Route options: Select to avoid certain road features.
Alerts: Enable or disable from a list of alerts. See ALERTS.
Commute Mode: Enable or disable the Commute Mode feature.
Keyboard layouts: Select extra keyboard layouts.
Manage profile data: Clear the search history or delete all profile data.
App details: View details of the installed navigation system.
Installed maps and updates: View the details of the maps currently loaded to the vehicle’s navigation system, and check for any updates to installed maps. See MAP UPDATES.
Help topics: Provides information on how to use the navigation system. See HELP TOPICS.
Connected services licenses: View connected services license details.
To adjust the volume of the navigation voice guidance, rotate the media system’s volume control while spoken guidance is given. See MEDIA CONTROLS.
The volume of the safety camera alert feature is linked to the voice guidance volume.
Make sure the relevant safety warnings and cautions have been read and understood before operating the navigation system. See NAVIGATION SAFETY.
A waypoint can be added or deleted, a route rearranged, or a round trip created for a selected route.
Waypoints can also be added from the Search, Places, or Your Destinations soft keys on the NAVIGATION MENU screen. Alternatively, select a point on the map. See NAVIGATION MENU.
Touch the Edit soft key on the NAVIGATION MENU screen to edit a route. See NAVIGATION MENU.
The following options can be selected:
The return journey does not include any of the selected waypoints. If waypoints are required, the waypoints must be added in the normal manner.
Trash can icon.¹
Make sure the relevant safety warnings and cautions have been read and understood before operating the navigation system. See NAVIGATION SAFETY .
Touch the view options icon on the map to display the VIEW OPTIONS screen. See USING THE NAVIGATION SYSTEM.
The navigation map and guidance views can be adjusted as follows:
Satellite view requires an internet connection.
Traffic view requires an internet connection.
Make sure the relevant safety warnings and cautions have been read and understood before operating the navigation system. See NAVIGATION SAFETY .
Alerts can be selected from the NAVIGATION SETTINGS menu. See NAVIGATION SETTINGS .
The following options are available:
Make sure the relevant safety warnings and cautions have been read and understood before operating the navigation system. See NAVIGATION SAFETY .
When detailed information is displayed about an address or place, touch the add favorite icon¹ and the place is added to the list of favorites.
The list of favorites is located via the Your Destinations soft key on the NAVIGATION MENU screen. See NAVIGATION MENU.
Displayed information that is already a favorite displays the edit favorite icon². Touch the edit favorite icon² to view information about the favorite location. The edit favorite icon² gives the option to change the icon and name, or to delete it from the list of favorites.
If no route is selected, select the required favorite to set it as a destination. If a route is selected, select the required favorite to add it as a waypoint.
When signed in to an InControl navigation account, destinations can be automatically synchronized. Destinations are synchronized between the vehicle, the internet, and the Route Planner smartphone app. See NAVIGATION PROFILE , INCONTROL NAVIGATION ACCOUNT , and PLANNING ROUTES AND DOOR TO DOOR ROUTING .
Add favorite icon.¹
Edit favorite icon.²
Make sure the relevant safety warnings and cautions have been read and understood before operating the navigation system. See NAVIGATION SAFETY .
Due to the map data file size, it is recommended that a USB 3.0 memory device is used to update the map data.
The vehicle must be stationary to enable the map update to start. Once the update process has started, the vehicle may be driven.
The navigation system cannot be interacted with until the map update is complete. If a route was active before the map update started, the navigation guidance is limited to voice guidance only.
Internet connection is required when downloading online.
The map data in the navigation system can be updated by downloading the updated map data to a USB memory device.
To update the navigation system’s map data, please visit www.landrover.com and search for ‘Map Updates’.
To download to a USB memory device:
Only the USB sockets in the center console’s storage box can be used for map updates. See AUXILIARY POWER SOCKETS.
Information on the installed maps is available in the NAVIGATION SETTINGS menu. See NAVIGATION SETTINGS.
For further information on updates to the navigation system’s maps, visit www.landrover.com and search for ‘Map Updates‘. Alternatively, contact an authorized retailer/authorized repairer.
When the fuel level falls below a predetermined level, an alert is triggered and the navigation system searches for nearby fuel stations.
Preferred fuel stations can be stored in the ALERTS menu. See ALERTS.
The alert can be enabled and disabled via the NAVIGATION SETTINGS menu. See NAVIGATION SETTINGS.
The availability and functionality of navigation maps displayed on the instrument panel depend on the specification of the vehicle.
The instrument panel can be set up to show a view of a full navigation map or a mini navigation map, depending on the instrument panel setup.
In this view, essential information, e.g., vehicle speed, fuel level, range, etc., is displayed as an information bar.
Navigation turn instructions are also available to the user and are displayed on the instrument panel and Head-Up Display (HUD).
Navigation turn instructions are only displayed if route guidance is active.
To display navigation map views in the instrument panel or HUD, please refer to the relevant section of the Owner’s Handbook. See INSTRUMENT PANEL MENU.
The navigation system assists the user with help topics. Help topics provide the user with a short tutorial on how to use various navigation features.
Help topics can be accessed via the quick start tiles that are displayed on the NAVIGATION screen. Alternatively, help topics can be accessed via the NAVIGATION SETTINGS menu. See USING THE NAVIGATION SYSTEM and NAVIGATION SETTINGS.
The navigation system provides tutorials for the following features:
The navigation system may also provide further tutorials on different navigation features.
The availability and functionality of navigation help topics depending on the specification of the vehicle.
Navigation voice control is not available in all markets.
When using voice control for the navigation system, information is used from the onboard navigation database. Online features are not available.
The user can command the navigation system to:
The navigate to a zip code voice command is not available in all markets.
For assistance when operating the navigation system’s voice control feature, please refer to the relevant section of the Owner’s Handbook. See VOICE TUTORIAL.
Connected Navigation uses a selection of features to enhance the navigation system.
Connected Navigation features include:
In order to benefit from the full range of Connected Navigation features, the vehicle requires connection to the internet. Please complete the following steps:
User preferences are available in the NAVIGATION SETTINGS menu. The connected feature settings for managing which features can connect to the internet when on the home network or while roaming can also be applied. See NAVIGATION SETTINGS .
Uses live traffic data feeds, allowing for better traffic information, planning, and rerouting, for the user to complete the journey more efficiently.
Historical and internet traffic information are not available in all markets.
Traffic information is displayed as color coded on the navigation map roads. The color codes are:
Real time traffic can be displayed with a route selected or with no route selected.
Real time traffic information does not automatically reroute journeys.
A traffic-enabled route can be selected. A traffic-enabled route displays improved and updated routes to the destination, avoiding traffic congestion and delays. An option can also be enabled to possibly find a route to the destination, avoiding an alerted incident or traffic flow issues.
A live internet connection is required to receive updated traffic information during the journey.
For further assistance, please refer to the navigation help topics. See HELP TOPICS .
While on route to a destination, the navigation system monitors live traffic conditions and takes into account typical traffic patterns for that time of day, keeping the user on the optimum route.
Online routing can be used in conjunction with commute mode.
The one box search feature allows the user to search the surrounding area for places of interest. The system can access expert destination information, travel tips, and inspiration as well as online travel reviews of the local area.
One box search is supplemented with data from the internet to provide more accurate results.
A live internet connection is required.
Before starting a route, the user can use the optional Route Planner smartphone app, one box online search, or saved destinations to set a destination. The smartphone app uses the Cloud to send the selected destination automatically to the vehicle’s navigation screen.
Once parked, the Route Planner smartphone app guides the user to the selected destination, which includes public transport options.
The Route Planner smartphone app is only available in selected markets.
For further assistance, please refer to the navigation help topics. See HELP TOPICS .
Downloading and installing the Route Planner smartphone app:
To sign in to the Route Planner smartphone app, use the same email address and password used to set up the InControl navigation account. See INCONTROL NAVIGATION ACCOUNT .
Apple and iPhone™ are registered trademarks of Apple Inc., registered in the US and other countries. App Store is a service mark of Apple Inc.
Google Play Store is a registered trademark of Google Inc.
The user can share the ETA so selected contact(s) know exactly when arriving to destination, as calculated by the navigation guidance system.
If the user is running late to the destination, the share ETA feature can send automatic updates via text messages or email, without any further action from the user.
Contacts need to be set up within the navigation profile.
To share the ETA, touch the information bar (5) on the touchscreen. Follow the on-screen instructions. See MAP SPLIT SCREEN.
For further assistance, please refer to the navigation help topics. See HELP TOPICS .
The satellite views feature provides an overhead map view of the vehicle’s surroundings.
If the satellite view feature is used continuously, it may consume large amounts of mobile data. Check the data allowance is appropriately configured for providing high-data services.
The street level imagery feature provides a 360° panoramic street view in selected locations and markets only.
When fuel station is selected during a POI search, the nearby fuel stations can be sorted according to the price of the fuel. Fuel prices are updated to the vehicle’s database from the internet.
Fuel pricing information may not be updated in real time and cannot be guaranteed to be accurate.
In some markets, a relative price index is displayed instead of live fuel prices.
Commute mode allows for the navigation system to learn regular commutes and automatically advises the user of the expected journey time based on live and historical traffic movements without the user having to input a destination.
The navigation system learns the routes the user takes for a set destination and advises which of those is the quickest.
Commute mode can be enabled and disabled via the NAVIGATION SETTINGS menu. See NAVIGATION SETTINGS .
Commute mode displays a highlighted route on the navigation map and uses the learned routes, combined with live traffic information, to calculate the fastest of the previously used routes.
If more than one commute is available, the alternative commutes are available for selection.
Commute mode displays a map on the touchscreen, but does not give voice guidance.
For further assistance, please refer to the navigation help topics. See HELP TOPICS .
As the user approaches a destination, the navigation system displays available parking. Simply tap on the preferred parking lot. The navigation system updates to direct the user to it. Available parking and pricing information are also displayed for selected markets.
The safety cameras feature provides the location of potential accident black spots, or areas that have been identified as a potential danger by the presence of safety cameras. Available in selected locations only.
Safety camera information is not available in all countries.
A navigation profile enables personalized settings and information, e.g., favorite destinations, previous journeys and navigation settings to be stored.
More than one navigation profile can be created.
On first use of the navigation system, the touchscreen prompts the user to create and name a profile.
When prompted, scroll to the bottom of the page and select Turn on all to enable all connected navigation features.
A navigation profile can also be edited, switched, and reset within the NAVIGATION SETTINGS menu. See NAVIGATION SETTINGS .
For further information on creating a navigation profile, please refer to the InControl section of the Land Rover website at: www.landrover.com/navigation.
An InControl navigation account must be created in order to use certain Connected Navigation features.
Once a navigation profile has been created, an InControl navigation account can be created.
In the main navigation screen, select Sign In.
Follow the on-screen instructions to register a new account.
An InControl navigation account can also be set up within the Edit profile tab in the NAVIGATION SETTINGS menu. See NAVIGATION SETTINGS .
For further information on setting up an InControl navigation account, please refer to the InControl section of the Land Rover website at: www.landrover.com/navigation.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…