In the interest of safety, only operate or adjust the system when it is safe to do so. Driver distraction can lead to accidents, potentially causing serious injury or death.
Do not adjust the touchscreen controls, or allow the system to distract the driver, while the vehicle is moving. Driver distraction can lead to accidents, potentially causing serious injury or death.
To access the front climate screen, touch the Climate icon on the lower touchscreen. See LOWER TOUCHSCREEN CONTROLS.
Do not attach labels to the rear window. Do not scrape or use abrasive materials to clean the inside of the rear window.
The heated windshield and rear window operate only when the engine is running.
The blower speed is automatically set in AUTO mode. Adjusting the blower speed cancels AUTO mode. Touch AUTO to return to the auto blower speed control.
In cold ambient conditions, the windshield and rear window heaters switch on automatically when the engine is started. This function can be switched on or off via Climate Settings. See CLIMATE SETTINGS
Touch briefly to select timed recirculation. Recirculation switches off automatically after a set time (dependent on the ambient temperature).
Touch and hold to select latched recirculation. Recirculation remains on until the icon is touched again.
Prolonged use at low temperatures may cause the windows to fog.
Air ionization technology is designed to improve the air quality within the cabin.
AUTO mode is the recommended normal operating mode. In AUTO mode, the system regulates cabin climate based on feedback from the vehicle’s sensors, helping maintain a stable and comfortable cabin environment.
When a climate setting is adjusted manually the system exits full AUTO mode, this overrides automatic climate adjustment and delivers only the selected settings.
Some of the icons and soft keys have an LED indicator lamp that illuminates to confirm selection.
If the climate control system is switched off, pressing an AUTO button, A/C, MAX A/C, or the MAX defrost button switches the climate control system on.
Water expelled by the A/C system may collect underneath the vehicle, when parked. The expelled water is not a cause for concern.
United States of America, Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA):
This vehicle, which may be fitted with a regulated pesticide device (air ionizer) was produced at the following facility: EPA Est. 93184-GBR-1
California Air Resources Board (ARB), Air Cleaning Devices Regulation:
The following applies to the air ionizer device that may be fitted in this vehicle:
To view the climate settings menu, select the Settings icon, on the lower touchscreen, then select Climate from the Lower screen display.
The climate control system monitors exterior air pollution, and selects recirculation if it reaches a predetermined level. Automatic recirculation only operates when the Air Purity function is active. The sensitivity of the air quality sensor can be set via the Climate Settings screen. See AIR QUALITY SENSOR.
It is recommended that automatic recirculation is enabled, to maintain the optimum air quality within the vehicle.
The sensitivity of the air quality sensor can be adjusted by changing the Air Purity level.
To adjust the Air Purity level:
To access the rear climate screen, touch the climate icon on the lower touchscreen. See LOWER TOUCHSCREEN CONTROLS.
Control the rear climate as follows:
The rear climate can be adjusted with the controls located in the rear of the center console.
Control the rear climate as follows:
Some of the buttons have an LED indicator lamp that illuminates to confirm selection.
In addition to the selectable controls, the REAR CLIMATE screen displays symbols that indicate the status of heating and ventilation functions.
If the climate control system is switched off, pressing the rear AUTO button or the blower speed increase button switches the climate control system on.
If the system is in defrost mode, all rear controls are disabled and no airflow is available to the rear occupants.
To access the seats screen, touch the seats icon on the lower touchscreen. See LOWER TOUCHSCREEN CONTROLS.
Control the seat comfort and adjustment as follows:
Always make sure the heated footrest option is switched off before stowage. Failure to deselect the heating option can result in discoloration and distortion of the front passenger seat trim.
To access the seats screen, touch the seats icon on the lower touchscreen. See LOWER TOUCHSCREEN CONTROLS.
Control the seat comfort and adjustment as follows:
The heated footrest is only available on vehicles with executive class seating and is only fitted behind the front passenger seat.
Make sure the heated footrest option has been deselected before storage. See REAR SEAT COMFORT POSITION
Heated seats consume a large amount of battery power. They only operate when the engine is running.
The heated rear seats (non-climate) can only be operated by pressing the buttons located at the rear of the center console.
Heated seat icon.
Touch the relevant heated seat icon to switch the required heated seat on at the maximum setting. The three LED indicators in the button illuminate.
Touch a second time to set the heated seat at the medium setting. Two LED indicators illuminate.
Touch a third time to set the heated seat at the lowest setting. One LED indicator illuminates.
Touch a fourth time to switch off.
The heated front seats are controlled via the lower touchscreen. See CLIMATE SEATS.
On vehicles with rear climate seats, the rear heated seats are controlled in the same manner as climate seats. See CLIMATE SEATS.
The climate seats only operate when the engine is running.
To access the heated or climate seat screen, touch the seat icon on the lower touchscreen. Touch the heated or climate seats icon. See SEAT COMFORT AND ADJUSTMENT.
The temperature status of the selected seat zone is displayed on the touchscreen. The status orange is red for heated operation and blue for cooling operation.
The rotary control displays a numeric + or – status. The outline of the rotary control illuminates to display red for heated operation and blue for cooling operation.
Seat massage does not operate when the vehicle’s interior temperature is in extreme cold or hot climate conditions.
Seat massage only operates when the engine is switched on.
Seat massage pauses for 5 seconds if any adjustments are made to the lumbar, bolster, or shoulder sections of the seat.
To access the seat massage screen, touch the seat icon (1) on the lower touchscreen. Touch the respective seat massage icon (4). See SEAT COMFORT AND ADJUSTMENT.
Touch the icon of the desired massage format: Wave, Pulse, Pulse Duo, or Combination.
On vehicles with executive class seating, an additional format of Hot Stone is available. Hot stone provides increased central heat for the spine.
The outline of the rotary control illuminates to indicate the level of seat massage intensity.
Auto Massage can be set in Seat Settings. See SEAT SETTINGS.
The massage programs have a 20-minute cycle. Reselect for repeated use.
Seat settings can be accessed via the Settings icon on the lower touchscreen. See LOWER TOUCHSCREEN CONTROLS.
Touch the Settings icon to access the Lower screen display on the lower touchscreen, then select Seats.
The following options can be selected:
The comfort controller enables control of the rear seat environment including, the climate seat, heated seat, and seat massage functions, via a downloaded smartphone app. The Comfort Controller app is only available on vehicles with executive class seats.
In order to use Comfort Controller, first, download the Comfort Controller app to a phone.
Downloading and installing the app:
The availability and functionality of the Comfort Controller app depend on the specification of the vehicle and the market in which the vehicle is used.
The temperatures selected via the climate control system are perceived values. The system operates to achieve these selected values. The selected value does not represent the output temperature from the air vents. Air vent output temperature varies as the system automatically adjusts the vent outputs to achieve the set temperatures.
The actual temperature in the cabin may differ from the set temperatures due to internal and external factors, including ambient temperature, sun load, and direction. The climate control system automatically adjusts the airflow level, direction, and temperature to compensate for these internal and external factors. Automatic adjustments in the air vent outputs may result in some temperature differentiation within the cabin.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…