2022 Land Rover Range Rover Sport Load Carrying Owners Manual

Contents hide

1 2022 Land Rover Range Rover Sport Load Carrying

2 LOAD CARRYING

3 LOADSPACE COVER

4 LUGGAGE ANCHOR POINTS

5 LUGGAGE DIVIDER

6 SKI HATCH

2022 Land Rover Range Rover Sport Load Carrying

LOAD CARRYING

WARNING

Never allow passengers to travel in the loadspace under any circumstances. All vehicle occupants should be seated correctly and should wear a seat belt at all times when the vehicle is in motion. Failure to do so can lead to serious injury or death in the event of an accident.

WARNING

All items carried in the vehicle should be properly secured. If the vehicle is involved in an accident or subject to sudden braking or a change of direction, loose items can cause serious injury.

LOADSPACE COVER

WARNING

Do not store the loadspace cover loose in the vehicle. During an accident or sudden maneuver, loose objects could cause serious injury or death.

WARNING

Never place objects on top of the loadspace cover. During an accident or sudden maneuver, loose objects can cause serious injury or death.

WARNING

To avoid injury the loadspace cover must not be left in the fitted position when the third-row seats are occupied.

CAUTION

Remove the stored loadspace cover before moving the seats. Failure to do so may result in damage to the loadspace cover.

CAUTION

Do not attempt to raise the second-row seats into the upright position, or tip them forward for third-row access, while the loadspace cover is stored behind the second row, as damage could result.

Pull the rigid portion of the cover to unroll.
Engage the end pieces into the recessed areas molded into the loadspace sides.To retract the loadspace cover, disengage the ends from the recessed areas and allow the soft portion of the cover to retract into its housing.
To remove the cover, turn the release lever to unlock the assembly and disengage the pins from the sockets.

To refit the cover, engage the left side of the assembly into the recessed area. Engage the right side and push down into place until an audible click is heard.

THIRD-ROW SEAT BELTS:

WARNING

Never place the loadspace cover behind the second row of seats, if the third row is to be occupied. Doing so may lead to serious injury or death.

The loadspace cover can be used with the third-row seat belts still connected. To allow the loadspace cover to be unrolled and retracted, without fouling on the seat belt, place the seat belt into the trim clip. The trim clip is located at the rear of the loadspace. See the seat belts section of this handbook for more information. See SEAT BELT OPERATION.

LUGGAGE ANCHOR POINTS

WARNING

All items carried in the loadspace area should be properly secured. If the vehicle is involved in an accident, subject to sudden braking or change of direction, loose items can cause serious injury.

To assist in safely securing large items of luggage, six lashing eyes are located on the loadspace floor.
If adjustable anchor points are fitted, first turn the locking button counterclockwise to unlock. Press the mechanism and slide to the required position in the luggage rail. Release the mechanism to latch into position. Move the anchor point slightly until is heard a click. The anchor point is now secured. Turn the mechanism clockwise to lock.

NOTES

A range of approved luggage retention accessories is available from a retailer/authorized repairer.

HYBRID VEHICLES:

To assist in safely securing large items of luggage, six lashing eyes are located on the loadspace floor.

LUGGAGE DIVIDER

A luggage divider kit is provided to assist with safely securing items of luggage to the loadspace floor.

Floor-mounted luggage rails provide a full-width mounting channel that accommodates a flexible retracting band or a solid telescopic divider to retain soft and hard luggage of all shapes and sizes.

Press and then pull the retracting band until the required length is reached.
NOTES

The retracting band should only be used along the side of the loadspace floor, as illustrated.
Adjust the divider to the required length.
Unlock the appropriate lashing eye and attach the retracting band and divider.
With the lashing eye in the unlocked position, press the mechanism and slide to the required position in the luggage rail.
Lock the lashing eye in the required position.
To remove the retracting band and divider from the lashing eye, unlock the lashing eye and press the lock or unlock button to release.