The instrument panel displays information, warnings, and menu options to the driver. See WARNING LAMPS AND INDICATORS. To configure the interactive driver display layout to suit personal preferences, select the Display and Display layout instrument panel menus. See INSTRUMENT PANEL MENU.
The displayed information automatically changes position, format, and content amount for each display layout option.
Select the Display and Units instrument panel menus to configure the temperature and tire pressure units.
The components of the instrument panel are as follows:
To configure the information panel display to suit personal preferences, select the Display and Info panel instrument panel menus.
If the pointer moves onto the red line, the engine is overheating. In this event, the instrument panel illuminates the engine temperature warning lamp. See ENGINE TEMPERATURE (RED).
If the engine overheats, stop the vehicle as soon as safety permits. Allow the engine to idle until the temperature reduces. If the temperature does not reduce after several minutes, switch the engine off and allow it to cool. If the problem persists, seek qualified assistance immediately.
Serious engine damage occurs if the vehicle is driven while the engine is overheating.
In the event of the engine overheating, a reduction in engine performance may occur. The Air Conditioning (A/C) system may also cease operation, to reduce the load on the engine and assist with engine cooling.
Never allow the engine to run out of fuel. Doing so may cause serious damage to the vehicle’s fuel system.
To configure the hybrid content display, select the Display and Hybrid content instrument panel menus. See INSTRUMENT PANEL MENU.
Select the required menu options display:
The power gauge and the tachometer only display in the Two dials or dial display layout options. If required, select the Display and Display layout instrument panel menus.
The tachometer automatically replaces the power gauge display in the event that:
Some information displayed in both of the hybrid display options is as follows:
The instrument panel displays the current hybrid battery charge and the total driving distance. The position and format changes for some Display layout instrument panel options.
The instrument panel displays hybrid information and the battery charge status when the vehicle is charged via an external power source. For example, connected to a charging station using the vehicle’s charging cable. See CONNECTING A CHARGING CABLE.
The hybrid power gauge displays information for the operation of the hybrid system.
The following information is displayed:
If selected, SAVE replaces EV. See SAVE.
The state of charge icon is visible within the instrument panel and accompanies the battery gauge (11).
Do not operate the instrument panel controls while the vehicle is moving. Doing so may cause driver distraction, potentially resulting in an accident and causing serious injury or death. Use the instrument panel menus to configure the instrument panel display and some vehicle features. Use the controls mounted on the left side of the steering wheel to display and navigate through the instrument panel menus.
Operate the instrument panel menus as follows:
The menus do not display if the instrument panel displays any warning or information messages. In this event, press the OK button to clear each message after reading and taking any required action. See WARNING AND INFORMATION MESSAGES.
Press the > button or the < button, to scroll through and highlight the required main menu option, displayed at the top of the information panel. The relevant sub-menu list is automatically displayed.
Press the ∧ button or the ∨ button, to scroll through the sub-menu list and highlight the required menu.
Press and release the OK button, to view the sub-list options for the highlighted sub-menu. Scroll up or down to the required option.
Press and release the OK button to select or deselect the required sub-list option.
Press and release the < button to return to the previous menu list.
Press and hold the < button to close and exit the instrument panel menus. The OK button extinguishes and the MENU button illuminates to confirm deselection.
The displayed menu options are as follows:
Before making any changes to the Vehicle settings, make sure to read and fully understand the relevant sections and topics of the Owner’s Handbook. Failure to do so can lead to serious injury or death.
Do not ignore any warning or information messages displayed in the instrument panel. Take appropriate action as soon as possible. Failure to do so may result in death, serious injury, or serious damage to the vehicle. The instrument panel displays warning messages if specific driver action is required, or to accompany illuminated warning lamps. For example, in the event that a vehicle system fault is detected. The instrument panel displays information messages if specific driver action is required, or for driver information. For example, to confirm and assist with the selection or deselection of some vehicle features. To extinguish an instrument panel warning or information message, press the OK button on the steering wheel controls.
Extinguishing displayed warning and information messages does not clear or rectify a detected fault.
If a warning message is manually extinguished, the instrument panel illuminates an amber or red warning lamp until the cause of the message is rectified. If a persistent fault is detected, the warning message displays each time the ignition is switched on. In this event, follow any on-screen instructions or seek qualified assistance. Instrument panel messages are displayed in order of importance. If more than one instrument panel message is active, each message is displayed in turn for 2 seconds. High-importance warning messages are displayed first. The displayed warning messages can also be accompanied by an audible tone. Some warning messages can also display the handbook symbol. For information regarding warning messages and any action required, refer to the warning and information lamps section of the Owner’s Handbook. Follow any on-screen instructions, if displayed. The instrument panel displays a warning message until the detected fault is rectified.
Press and release the trip button to change the trip content option displayed in the instrument panel.
The available trip content options are as follows:
Some of the trip content values can be reset to zero. Select and display the relevant trip content option. Press and hold the trip buttons for 2 seconds. The distance, average speed, and average fuel economy values for the trips can be reset. Set the trip computer display to show the required trip to reset. Press and hold the trip button until the instrument panel displays the Resetting message. Select the Trip and Trip Auto instrument panel menus to automatically reset Trip Auto each time the ignition is switched on. Select the Trip bank and Trip Auto instrument panel menus to add, or remove, another trip figure to the Trip Auto figure. Press the trip button for longer than 1 second, when the Trip Auto values for distance, average speed, and average fuel economy are displayed. The instrument panel displays either the Adding last journey or the Removing last journey message. Press the trip button for longer than 1 second to select the desired option. The previous trip information is added to or removed from, the Trip Auto value. The new total is displayed. There is no limit to the number of times this can be done before the ignition is switched off.
The Range and Battery range displays show the predicted distance in miles or km that the vehicle can travel. See USING THE TRIP COMPUTER.
Range: Displays the total predicted driving distance for the current fuel tank level and the amount of charge in the hybrid battery.
Battery range: Displays the predicted driving distance for the amount of charge in the hybrid battery.
The next oil service interval can be displayed via the Vehicle info and Next service instrument panel menus. See INSTRUMENT PANEL MENU.
Dependent on the vehicle’s specification, other fluid intervals and capacities may also be displayed. The oil service interval displays as a distance left until the service are due. If the distance is exceeded, the display shows a negative (–) value to indicate that a service is overdue.
Do not operate or adjust the Head-Up Display (HUD) system while the vehicle is moving. Doing so may cause driver distraction, potentially resulting in an accident and causing serious injury or death.
The HUD system may take more time to display in extreme temperatures, allowing the system to operate at the correct temperatures.
The full HUD image may not be viewed correctly while wearing polarized sunglasses.
Do not place anything over the HUD unit, which is located above the instrument panel, next to the windshield.
The position and format of the displayed HUD information vary due to priority and the number of features currently switched on or off. Setting the correct HUD position is important. The correct position is dependent on a number of conditions, including the height of the driver and the seat position.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…