2022 Land Rover Range Rover Sport Exiting The Vehicle Owners Manual

If the vehicle is locked with the smart key, operating an interior door handle unlocks only that door. If the door is opened, the alarm sounds.

The rear door child safety locks inhibit the rear door lock and unlock buttons and the interior door handles. See CHILD SAFETY LOCKS.

CLEAR EXIT MONITOR

The Clear Exit Monitor system activates only when the door has been unlatched. The icons illuminate as follows:

1. Illuminates white to indicate that the system is active.
2. Illuminates amber if the system determines that it could be unsafe to open the door, due to passing traffic.

The icons extinguish after the door has been closed.

The Clear Exit Monitor system may not be able to detect all approaching traffic in all circumstances. The operation relies on the sensor’s ability to detect moving objects and this may be affected by road and weather conditions, and, also, if:

• Vehicles approach very quickly from behind.
• The sensors are impaired by mud, rain, frost, ice, snow, damage, accessories, or stickers.
• The sensor’s ‘line of sight is obscured by objects, such as other vehicles parked particularly wide or close to the vehicle.

Under these circumstances, as well as loss of functionality, reduced warning times may be experienced.

The clear exit monitor is only active below vehicle speeds of 3 mph (5 km/h). The system remains active for 3 minutes after the ignition is switched off.

DEACTIVATING THE ALARM WHEN TRIGGERED

If the alarm activates, it can be deactivated by any one of the following methods:

1. Press the unlock button on the smart key. See UNLOCKING THE VEHICLE.
2. Open a door using keyless entry.
3. Press the START/STOP button with a valid smart key positioned correctly. See ENGINE START BACKUP.

The cause of the last alarm activation can be displayed in the instrument panel. See INSTRUMENT PANEL MENU.

EMERGENCY LOCKING

In the event of a fault with the alarm and/or locking system, manually secure the vehicle. Lock all of the doors via the driver’s door key barrel.

The emergency key blade is required for this procedure. See UNLOCKING THE VEHICLE.

Using the emergency key:

1. Make sure all apertures are closed and insert the emergency key blade into the key barrel of the driver door.
2. Turn the emergency key blade 90° clockwise.
3. All of the doors single lock and access to the loadspace is inhibited.
4. Pull the exterior door handles to check that the doors are locked. When doing so, make sure any valid smart keys are at least 2 m away from the doors.

If the issue persists, consult a retailer/authorised repairer for rectification as soon as possible.

In the event of the battery discharging, each of the doors must be locked manually.

The emergency key blade is required for this procedure. See UNLOCKING THE VEHICLE.

Using the emergency key:

1. Open a door and locate the access cover of the emergency lock on the edge of the door. The cover has an embossed lock icon. Insert the emergency key blade into the cover’s slot. Rotate the cover counter-clockwise to first release it. Pull the cover to remove it from the door. Keep the lock’s access cover safe.
2. Insert the emergency key blade firmly into the emergency lock. A firm push activates the door’s locking mechanism. Remove the emergency key blade.
3. Refit the access cover of the emergency lock. Rotate the cover clockwise to secure it firmly.
4. Close the door and check that it is locked.

Repeat the procedure for all other unlocked doors.