After washing the vehicle, it is recommended to use a suitable metal polish on stainless steel or chrome finishers to restore the surface appearance.
Do not aim the water jet directly at any rubber gaiters or seals on suspension joints.
Make sure that the water jet nozzle is more than 12 in (300 mm) away from vehicle components.
Stickers, films, magnetic plates, or similar should not be affixed to the vehicle’s exterior. Removing such objects can cause damage to the vehicle’s paint work.
Additional care is required when cleaning the exterior of vehicles with a satin matte paint finish. It is recommended to wash the vehicle by hand, using a soft sponge, making sure not to apply high pressure to the paint surface. Avoid washing the vehicle in direct sunlight.
Remove any of the following substances immediately, where possible:
Keep the parking sensors clean to maintain accuracy and performance.
If required, clean the cameras using a cloth moistened with a small amount of glass-cleaning product.
Make sure the vehicle’s underside is cleaned as soon as possible after driving off-road.
For vehicles fitted with air suspension, raise the suspension to Off-Road 2 to improve cleaning access. See OFF-ROAD HEIGHT.
Make sure that the areas around the wheel and brake assemblies are clean and clear of debris. Inspect the wheel rims for signs of damage or scoring, and check for unusual brake noise when driving and applying the brakes.
Clean the rear window with a soft cloth to avoid damaging the heating element. Do not scrape the glass or use any abrasive cleaning fluid.
Mirror glass is particularly susceptible to damage. Wash with soapy water. Do not use abrasive cleaning compounds or metal scrapers to remove ice.
To avoid damaging the protective coating, only clean the interior side of the sunroof glass with a soft cloth. Do not scrape the glass or use abrasive cleaning fluids.
To avoid damaging the heating elements when cleaning the inside of the rear window, use only a soft, damp cloth or chamois leather. Do not use solvents or sharp objects to clean the glass.
A mild solution of soap and water, or car shampoo, should be used to clean the wind deflector net periodically. Support the underside of the net with a soft cloth, and gently scrub the net using a soft bristled brush.
Remove grease or tar with vehicle manufacturer-approved tar remover or methylated spirit (alcohol). White spirit is also effective, but must not be applied to rubber, particularly the windshield wiper blades.
It is recommended that the vehicle is polished regularly using the vehicle manufacturer’s polish and a polishing cloth.
To prevent ingrained dirt and staining, inspect the interior regularly and clean every 1 to 2 months.
It is recommended to vacuum interior surfaces with a soft brush head attachment before using cleaning products.
Most stains on fabrics can be removed if treatment is carried out immediately before the stain has a chance to dry in. Specific products for use on interior fabrics are recommended for cleaning fabric upholstery, however, dry cleaning fluid or clean water can also be used.
To clean fabric upholstery:
To avoid watermarks clean the entire section of fabric containing the stain.
To prevent ingrained dirt and staining clean the seat upholstery every 1 to 2 months, dealing with stains immediately.
To clean leather upholstery:
Use the vehicle manufacturer’s leather cleaner several times a year to maintain the leather’s suppleness and appearance. The cleaner nourishes and moisturizes the leather, and helps to improve the surface’s protective film against dust and substances.
Extend the seat belts fully. Specific products for use on interior fabrics are recommended, follow the product instructions. Alternatively, use warm water and a non-detergent soap to clean. Allow the seat belts to dry naturally while fully extended.
Marks or stains can be removed by gentle scrubbing with a weak solution of soap and warm water.
For more stubborn stains, a commercially available carpet cleaner should be used.
Do not polish the instrument panel. Polished surfaces are reflective, and may interfere with the driver’s view. Driving without a clean view may lead to a collision, resulting in serious injury or death.
Observe the following points when cleaning screens and displays:
Heavy contamination on the wiper blades should be removed, using a soft, damp sponge or cloth.
If a washer jet becomes blocked, use a thin strand of wire to unblock the jet, by inserting the wire into the jet. Make sure the wire is completely removed after unblocking.
Regularly inspect the paintwork for damage. Any stone chips, fractures, or deep scratches in the paint/bodywork should be repaired promptly. Bare metal corrodes quickly, and, if left untreated can result in expensive repairs.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…