Make sure the following warnings and cautions have been read and fully understood before driving the vehicle.
Failure to use the camera systems safely could result in damage to the vehicle, or an accident, leading to serious injury or death.
The camera system is available in three modes:
The camera system consists of four cameras, located as follows:
Camera views are displayed on the touchscreen. See ON-ROAD CAMERA VIEWS.
Camera views are displayed on the touchscreen. See OFF-ROAD CAMERA VIEWS.
If an object is detected in close proximity to the vehicle, visual warnings appear on the plan view screen in the form of lines. The lines change color as the risk of a collision increases, as follows:
The on-road camera system activates automatically when:
When the camera system is active, the camera views automatically switch, under the following circumstances:
To activate the on-road camera system manually:
Depending on the user’s requirement, alternative camera views can be manually selected. To select an alternative camera view, touch the camera view icons on the plan view area of the touchscreen.
The selected camera view icon illuminates the plan view area and an image displayed on the main display. Alternatively, swipe the main camera screen left or right to move to the next 3D surround view, or touch the left and right arrows displayed.
Camera icon with automatic collision alerts.¹
Camera icon without automatic collision alerts.²
Touch the camera icon on the touchscreen in order to select the off-road camera mode. See TOUCHSCREEN HOME MENU.
Select OFF ROAD to activate the off-road camera mode.
Alternatively, the 4X4i screen can be used to select and activate the off-road camera mode. See 4X4i OVERVIEW.
The off-road camera mode comprises the following views:
Drive assist icon: Touch to display the drive assist view.
The camera system is not active when a fault occurs in the camera system.
The camera system does not perform to the best of its ability if:
The following may be a reason why the camera system views are no longer displayed on the touchscreen:
The touchscreen displays warning messages to inform the driver of any performance or system issues.
If all of the cameras are clean and the fault is not rectified after an ignition cycle, contact a retailer/authorized repairer.
The clean camera feature uses the vehicle’s washer system to remove dirt and dust from the rear camera. To activate the feature, select the icon on the touchscreen. The clean camera feature is only available in conjunction with the rear camera and rear junction camera views.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…