2022 Land Rover New Range Rover Tire Pressure Monitoring System (TPMS)
TIRE PRESSURE MONITORING SYSTEM (TPMS)
The Tire Pressure Monitoring System (TPMS) provides a low-pressure warning but does not re-inflate the tires. Tire pressures should be checked regularly, using an accurate pressure gauge when the tires are cold. Failure to do so could result in an accident, potentially leading to serious injury or death.
The TPMS cannot predict or warn of, a tire failure, or register damage to a tire. Regularly check the condition of the tires, especially if the vehicle is driven off-road. Failure to do so could result in an accident, potentially leading to serious injury or death. The tire pressure warning lamp illuminates when one or more of the tires is significantly under-inflated. A message is also displayed. Stop and check the tires as soon as possible. Inflate the tires to the recommended inflation pressures for the vehicle’s loading condition. See TIRE PRESSURE MONITORING SYSTEM (TPMS) (YELLOW) and TIRE PRESSURES. The tire pressure warning lamp illuminates if a temporary-use spare wheel is used as a road wheel. See TEMPORARY USE SPARE WHEEL AND TIRE CHANGE. The TPMS constantly monitors the tire pressure in each road wheel. The spare wheel tire pressure is not monitored. To confirm if TPMS is fitted to the vehicle: Switch on the vehicle’s ignition and check for the presence of a TPMS lamp in the instrument panel. Vehicles with a TPMS lamp have TPMS.
TPMS lamp.
A special service kit is required when changing a tire fitted with a TPMS valve.
Non-approved accessories may interfere with the TPMS. If this occurs, the TPMS warning lamp flashes and then illuminates permanently.
Different types of tires may affect the performance of the TPMS. Always replace the tires in accordance with recommendations. Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Underinflation also reduces fuel efficiency and tire tread life and may affect the vehicle’s handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevents the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.
The instrument panel displays the TPMS warning lamp and related warning messages if a low tire pressure, or a fault, is detected.
The TPMS warning lamp operation and warning messages are as follows:
| Lamp operation and warning message | Issue | Action |
|---|---|---|
| The TPMS warning lamp illuminates for 3 seconds and then extinguishes. | Tire pressures are all correct. | No action is required. |
| The TPMS warning lamp illuminates permanently when the ignition is switched on. A low tire pressure warning message is displayed in the instrument panel. | One or more tire pressures are low. | Check and adjust the tire pressures of the tires shown in the instrument panel. |
| The TPMS warning lamp flashes for 75 seconds when the ignition is switched on, and then illuminates permanently. A warning message is displayed in the instrument panel to advise that a tire is not being monitored. A yellow cross appears on the tire in the warning message and in the Tire Pressures Menu. | The vehicle has lost communication with one of the tires. | Check and adjust all tire pressures, if required, before driving the vehicle. If the problem persists, contact a retailer/authorized repairer. |
| The TPMS warning lamp flashes for 75 seconds when the ignition is switched on, and then illuminates permanently. No warning message is displayed in the instrument panel. Two or more yellow crosses appear on the tires in the Tire Pressures Menu. | The vehicle has lost communication with more than one of the tires. | Check and adjust all tire pressures, if required, before driving the vehicle. If the problem persists, contact a retailer/authorized repairer. |
| The TPMS warning lamp flashes for 75 seconds when the ignition is switched on, and then illuminates permanently. No warning message is displayed in the instrument panel. No yellow crosses appear on the tires and no tire pressures are displayed in the Tire Pressures Menu. | Unknown fault with the TPMS. | Check and adjust all tire pressures, if required, before driving the vehicle. If the problem persists, contact a retailer/authorized repairer. |
TIRE PRESSURE CHECK
The vehicle’s current tire pressures can be displayed via the Tire Pressures menu. See INSTRUMENT PANEL MENU OPERATION. When the Tire Pressures menu is selected, the instrument panel displays two tire pressure values for each tire. One value shows the actual tire pressure. The other, displayed in brackets, is the advised inflation pressure. The actual and advised inflation pressures change, based on ambient conditions and as the air temperature within the tires fluctuates during use.
The advised inflation pressures do not always align with the vehicle’s cold pressure label due to warming of the tires through driving, and changes in ambient conditions. The advised and actual tire pressures, displayed in the instrument panel, change as the tire temperature changes.
Always inflate the tires to the advised inflation pressures displayed in the Tire Pressures menu.
If any of the wheels or tires have been removed, the displayed tire pressures may not be valid. Drive the vehicle for at least 15 minutes in order to re-calibrate the system.
The tire pressure units can be configured to display as either psi, bar, or a via the Vehicle and Units menus on the touchscreen. See SYSTEM SETTINGS.
Tire pressures may not be displayed after the following actions:
- Disconnection of the vehicle’s battery.
- Repairs to the TPMS system.
- Software updates.
The tire pressures are displayed after the vehicle is driven at 16 mph (25 km/h) for 5 to 10 minutes.
VEHICLE LOADING
When the vehicle is delivered, the tire pressures are set to those displayed on the tire pressure label. See TIRE PRESSURE LABEL. The Tire Pressure Monitoring System (TPMS) can be adjusted for Light load and Normal load conditions. Adjust the TPMS load settings via the TPMS load setting instrument panel menu. See INSTRUMENT PANEL MENU OPERATION.
The vehicle’s ignition must be switched on and the vehicle stationary.
When the vehicle’s ignition is switched on, the instrument panel displays a TPMS light load lamp, for approximately 4 seconds, if the light load setting is selected. No lamp is displayed if the normal load setting is selected. See TIRE PRESSURE MONITORING SYSTEM (TPMS) LIGHT LOAD (WHITE).
TPMS light load lamp.
Adjust the TPMS to suit the vehicle’s load.
| Number of seats in the vehicle | Light load | Normal load |
|---|---|---|
| Up to 5 seats | up to 3 occupants | 4 occupants and above |
| 6 seats and above | up to 4 occupants | 5 occupants and above |
The TPMS load setting and tire pressures must correspond with the vehicle’s current load. See TIRE PRESSURES. The vehicle’s current load setting can be displayed via the TPMS load setting menu. The vehicle’s current and advised tire pressures can be displayed via the Tire pressures menu. See INSTRUMENT PANEL MENU OPERATION.
FULL-SIZE SPARE WHEEL AND TIRE CHANGE
The Tire Pressure Monitoring System (TPMS) automatically recognizes:
- Changes in wheel positions.
- If a new wheel or sensor is fitted.
- If a full-size spare with a sensor is fitted.
The vehicle must be stationary for 15 minutes during the wheel, sensor, and tire change, to make sure that the system can detect the change. After driving above 16 mph (25 km/h), any TPMS warning messages or lamps should update and/or clear within approximately 5 to 10 minutes.
Re-inflate the tire, within close proximity of the vehicle, following repairs to a full-size spare wheel fitted with a TPMS sensor. The TPMS warning lamp may illuminate if tire inflation is not carried out within close proximity of the vehicle. Should this occur, re-inflate the tire within 5 m of the vehicle. See TIRE PRESSURE MONITORING SYSTEM (TPMS) (YELLOW) and TIRE PRESSURES.
The full-size spare tire’s pressure should always be maintained at the highest recommended cold inflation pressure for that tire size. The recommended cold inflation tire pressures are displayed on the tire pressure label. The highest recommended pressure is usually for the rear tires at a heavy load. See TIRE PRESSURE LABEL. Alternatively, visit www.ownerinfo.landrover.com.
TEMPORARY USE OF SPARE WHEEL AND TIRE CHANGE
The temporary-use spare wheel does not have a TPMS sensor.
If the temporary-use spare wheel is fitted, the system automatically recognizes the missing sensor and position. After approximately 10 minutes of driving above 16 mph (25 km/h), the instrument panel displays the Front (Rear) right (left) tire pressure not monitored message. The message is accompanied by the illumination of the Tire Pressure Monitoring System (TPMS) warning lamp. See TIRE PRESSURE MONITORING SYSTEM (TPMS) (YELLOW).
- The TPMS warning lamp first flashes and then illuminates continuously.
- The TPMS warning lamp display sequence activates at every ignition cycle until the temporary spare wheel is replaced by a full-size road wheel with a TPMS sensor fitted.
- The TPMS automatically re-calibrates when a full-size wheel is fitted to the vehicle, and the vehicle is driven above 16 mph (25 km/h) for approximately 5 to 10 minutes.
- Contacting a retailer/authorized repairer is not required unless the TPMS warning lamp still flashes, and then remains illuminated after the vehicle has been driven:
- with a full-size road wheel with a TPMS sensor fitted, and
- above 16 mph (25 km/h) for approximately 5 to 10 minutes.
Illumination of the TPMS warning lamp is normal when a temporary-use spare wheel with no TPMS sensor is fitted and is not a cause for concern.
TYPE APPROVAL NUMBERS
Tire Pressure Monitoring System (TPMS):
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada Standard IC – RSS-210. Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Changes or modifications, not expressly approved by the manufacturer, could void the user’s authority to use the equipment.
The 433 MHz TPMS Radio Frequency (RF) approval numbers for the USA and Canada are:
| USA FCC ID: | KR5S180052020A |
| 5WK49096 | |
| Canada IC: | 7812D-S180020A |
| 267T-5WK49096 |