POWER DOORS OPERATION
The powered doors electrically open or close according to a choice of user inputs:
NOTES
An audible warning sounds if an obstruction is detected in the door aperture or hinge area, or obstruction is detected by the door motor.
OPENING FROM OUTSIDE THE VEHICLE
While stationary and unlocked, the door handle is in position 1. Partially pull the exterior door handle to position 2, then release. The powered door opens. Pulling the door handle to its full extent (3) manually opens the door. See SMART KEY OPERATION, DOOR LOCKS AND HANDLES, and APPROACH UNLOCKING.
- Flush position. Car locked or in motion.
- Deployed position: Car unlocked and stationery.
- Half pull: requests power door open.
- Full pull: manual door open.
NOTES
The vehicle must be stationary for powered door operation.
NOTES
Pulling the exterior door handle to its full extent will unlatch the door manually. The door can then be opened manually, or powered operation can be requested by partially pulling the exterior door handle.
NOTES
Any secondary input, via manual hold, obstacle detection, or a second press of a switch or handle pull, suspends powered door operation.
OPENING FROM INSIDE THE VEHICLE:
The Interior door handle is shown in its rest state, 1. Partially pull the interior door handle halfway to position 2 on a closed door, then release. The power door opens. See DOOR LOCKS AND HANDLES.
NOTES
Pulling the interior door handle to its full extent (3) will unlatch the door manually. The door can then be opened manually.
Alternatively, use the touchscreen menu to open individual doors, or all the doors. In Park, access the Power doors control screen using the Vehicle picture shortcut. See POWER DOORS TOUCHSCREEN OPERATION.
NOTES
Any secondary input, via manual hold, obstacle detection, or a second press of a switch or handle pull, suspends powered door operation.
NOTES
Before operating the power doors, check the surrounding area is clear. Make sure that power opening the doors does not present a hazard to other road users and pedestrians. Make sure power door movement does not cause damage to public or private property.
CLOSING FROM OUTSIDE THE VEHICLE:
The power doors open electrically according to a choice of user inputs:
- A short press on the power door close switch will close the door electrically.
- A long press on the power door close switch will close all open doors, including the tailgate, electrically.
- A short press on the door lock button located on the exterior door handle closes that door electrically.
The power door close switch is located on the rear of the door as shown.
NOTES
Any secondary input, via manual hold, obstacle detection, or a second press of a switch or handle pull, suspends powered door operation.
CLOSING FROM INSIDE THE VEHICLE
The power doors close electrically according to a choice of user inputs:
- Press the brake pedal briefly to close the driver’s door only.
- Press the switch located near the grab handle and map reading light.
- Use the touchscreen menu to close individual doors or all doors. Access the Power door control screen using the Vehicle picture shortcut. See POWER DOORS TOUCHSCREEN OPERATION.
NOTES
Press and hold the close-all icon on the touchscreen to close all open doors and tailgate.
NOTES
Any secondary input, via manual hold, obstacle detection, or a second press of a switch or handle pull, suspends powered door operation.
NOTES
With child locks enabled, all interior controls for the rear doors are disabled. See CHILD SAFETY LOCKS.
DOOR HOLD FEATURE
The door hold feature retains the door in a fixed position, depending on where it stops moving. The retention force may vary depending on external conditions such as camber, incline and wind speed. Power-opening any door except the driver’s door will unlock all the doors. If 2-stage unlocking is enabled, opening the driver’s door will only unlock the driver’s door. See 2-STAGE UNLOCKING .
POWER DOORS TOUCHSCREEN OPERATION
The powered doors can be controlled via the touchscreen. While stationary, access the Powered doors control screen using the Vehicle picture shortcut. See SYSTEM SETTINGS.
NOTES
The vehicle must be stationary for powered door operation.
NOTES
Before operating the power doors, check the surrounding area is clear. Make sure that power opening the doors does not present a hazard to other road users and pedestrians. Make sure power door movement does not cause damage to public or private property.
The Vehicle shortcut icon is located on the bottom left of the touch screen.
Power door progress icon: Press the square stop symbol to halt power door movement.
Power door operation arrows: Press an arrow to move the power door in the direction indicated.
Power door operation warning: The power door system has detected a hazard or obstruction.
Power door operation not available: The power door operation is not available.
Power door fault: A system fault is preventing power door operation. If the fault persists and does not self-clear following an ignition cycle, seek assistance at a retailer or authorized repairer.
Child lock icon: Indicates child locks are enabled. Power door movement is not available with child locks enabled.
CAUTION
With child locks enabled, all interior controls for the rear doors are disabled. See CHILD SAFETY LOCKS.
POWER DOOR MENU SCREEN:
Power door menu screen:
- Open icon: Use to power open the door adjacent to the icon.
- Close icon: Use to power close the door adjacent to the icon.
- Tailgate icon: Use to control the electric tailgate. See OPENING AND CLOSING THE POWERED TAILGATE.
Powered door settings can be adjusted via the Vehicle sub-menu in System Settings. Use this menu to access settings relating to child locks, tailgate opening and hood opening. See CHILD SAFETY LOCKS, OPENING AND CLOSING THE POWERED TAILGATE, and OPENING THE HOOD.
The Handle/button control toggle disables or enables powered operation from the following areas:
- powered open from the interior release handle;
- powered open from the exterior release lever;
- powered close from the brake pedal.
POWER DOORS LIMITATIONS
The powered doors are disabled or limited under certain conditions:
- If the door’s exterior sensors detect an obstruction near the door’s opening path;
- If the vehicle is on a steep slope or steep camber;
- If the vehicle is not stationary;
- If the system detects a hazard in the external environment;
- In high winds;
- If the vehicle battery charge is insufficient.