2022 Land Rover New Range Rover Exterior Lights Owners Manual

2022 Land Rover New Range Rover Exterior Lights

EXTERIOR LIGHTS OVERVIEW

The lighting system operates automatically depending upon the ambient lighting conditions. The system selects the appropriate lighting function, low beam or Daytime Running Light (DRL), for the conditions that the system detects. In some circumstances, it may be necessary for the vehicle user to manually override the automatic operation. Some manual operations are not possible due to vehicle activity or legislative requirements.

LIGHTING CONTROL

Lighting control operation:

1. Neutral position: Default position for AUTO light activation. With the vehicle’s ignition switched on and drive gear is selected the required AUTO lighting feature, such as the Daytime Running Lamps (DRL), automatically activate.
   NOTES
   If the ambient light level drops below a predetermined level or in adverse weather conditions; the side lights, rear lights, low beam headlights, and license plate lights will switch on automatically. The headlight courtesy delay, Auto High Beam Assist (AHBA), and windshield wiper detection may also be activated.
2. Side lights on: Rotate the lighting control to this position and release it. The instrument panel warning lamp illuminates. See SIDELIGHTS (GREEN).
3. Headlights off: Rotate the lighting control to this position and release it. All exterior lighting features are switched off and the related instrument panel warning lamps are extinguished. The instrument panel warning light illuminates. See EXTERIOR LIGHTS OFF (WHITE).
4. Low beam headlights on: Rotate the lighting control to this position and release it to switch the low beam headlights on. The instrument panel warning lamp illuminates. LOW BEAM (GREEN)
5. AUTO lights on: Rotate the lighting control to this position and release it to switch AUTO lights on. All exterior lighting features required will switch on automatically.
   NOTES
   Low exterior light levels, caused by adverse weather conditions, may also cause the AUTO lights to feature to activate.
6. NOTES
   High beam on/off operates when low beam is already switched on.

   High beam headlights on/off:

   On: Push the lighting control away from the steering wheel and release it. The instrument panel warning lamp illuminates. See HIGH BEAM (BLUE).

   Off: Push the lighting control away from the steering wheel and release it. The instrument panel warning lamp extinguishes.

   NOTES
   Do not use high beam where it may distract other road users.
7. High beam headlights flash on: Pull the lighting control towards the steering wheel to flash the high beam headlights and release it to switch off. The high beam headlights and instrument panel warning light will stay illuminated while the lighting control is pulled towards the steering wheel.
8. Rear fog lights on/off:

   On: Rotate the inner lighting control collar towards the steering wheel and release it. The instrument panel warning light illuminates. See REAR FOG LIGHTS (YELLOW).

   Off: Rotate the inner lighting control collar towards the steering wheel and release it. The instrument panel warning lamp extinguishes.

   NOTES
   The rear fog lights only operate when the side lights or low beam headlights are switched on.
9. Front fog lights on/off:

   On: Rotate the inner lighting control collar away from the steering wheel and release it. The instrument panel warning light illuminates. See FRONT FOG LIGHTS (GREEN).

   Off: Rotate the inner lighting control collar away from the steering wheel and release it. The instrument panel warning lamp extinguishes.

   NOTES
10. Activating the front fog lights will deactivate the AUTO lights feature. To manually reactivate AUTO lights, rotate the lighting control to AUTO and release it.
    NOTES

    The front fog lights only operate when the side lights or low beam headlights are switched on.

EXTERIOR LIGHTS CONDENSATION

Condensation in the headlights, turn signals, or rear lights are a natural phenomenon.

Condensation can occur under certain atmospheric conditions or after washing the vehicle. The performance and life expectancy of the lights is not affected.

Condensation should partially or completely clear, with regular use of the lights, within 48 hours of dry atmospheric conditions.

LED lights distribute less heat towards the outer lens than halogen or xenon lights. In extreme conditions, LED lights may take longer to clear, but this is not detrimental to the performance of the light.

DAYTIME RUNNING LIGHTS (DRL)

During normal daylight operation, the Daytime Running Lights (DRL) operate automatically, with the lighting control in the AUTO position.

The DRL switch on automatically under the following conditions:

• The engine is running.
• The gear selector is out of Park (P).
• The Electric Parking Brake (EPB) is not applied. Market dependent.
• Auto lights are selected and high ambient light levels are detected.

Turn the lighting control to the OFF position to switch off the DRL. The DRL can be manually switched off only when the vehicle is stationary and the engine is running. The DRL reactivates when the vehicle’s speed increases above 6 mph (10 km/h) or the vehicle covers a distance of 109 yards (100 meters). Repeat the process to switch off the DRL during a journey.

HEADLIGHT COURTESY DELAY

Headlight courtesy delay operates whenever the lighting control is in the AUTO position, ambient light levels are low, and the vehicle’s ignition is switched off.

The time delay for illumination can be changed via the Exterior Lights settings.

To access the time options for headlight courtesy delay via the touchscreen:

1. Touch the settings icon¹ from any screen.
2. Touch the ALL soft key.
3. Touch the Vehicle’s soft key.
4. Touch the Exterior Lights soft key.
5. Touch the forward arrow in the box below Home lights to open the options menu.
6. Choose a time delay option.
7. Touch the exit icon² to return to the previously displayed screen.

Press the headlight button on the smart key to switch off courtesy lights at any time.

Settings icon.¹

Exit icon.²

WINDSHIELD WIPER DETECTION

If the AUTO lights feature is active or manually selected and the windshield wipers are switched on for 20 seconds or more. The side lights, tail lights, and headlights switch on automatically. When the wipers are switched off, the lights automatically switch off 2 minutes later.

MANEUVRING LAMPS

Maneuvring lamps are an extra side illumination feature to provide the driver with extra lighting during slow maneuvres and assist side camera visibility during dark ambient conditions.

The maneuvring lamps will automatically activate in dark ambient conditions at the start of a journey and during parking maneuvres when parking cameras are automatically activated or Reverse (R) gear is selected. The maneuvring lamps will automatically deactivate when the vehicle’s speed exceeds 6 mph (10 km/h).

The driver can disable and re-enable the maneuvring lamps at any time via the touchscreen:

1. Touch the settings icon¹ from any screen.
2. Touch the ALL soft key.
3. Touch the Vehicle’s soft key.
4. Touch the Exterior Lights soft key.
5. Select Maneuvring Lights: Toggle on or off.
6. Touch the exit icon², after selection, to return to the previously displayed screen.

Settings icon.¹

Exit icon.²

AUTO HIGH BEAM ASSIST (AHBA)

The AHBA system automatically selects and deselects high beams, under specific conditions of road lighting and in the absence of other vehicle lights. The system is only active when the ambient light drops below a predetermined level.

The driver can disable and re-enable the AHBA system at any time via the touchscreen:

1. Touch the settings icon¹ from any screen.
2. Touch the ALL soft key.
3. Touch Vehicle.
4. Touch Exterior Lights.
5. Automatic high beam assist: Toggle on or off. Toggle on to activate and view the available options.
6. Touch the exit icon², after selection, to return to the previously displayed screen.

To manually disable the AHBA feature and enable standard high beam, push the lighting control away from the steering wheel and release it. The instrument panel warning lamp illuminates. See HIGH BEAM (BLUE). Push the lighting control away from the steering wheel and release it to re-enable the AHBA feature. The instrument panel warning lamp illuminates. See AUTO HIGH BEAM (BLUE).

The following may affect the operation of the AHBA system:

• Highly reflective road signs.
• Dimly lit road users, e.g., cyclists or pedestrians.
• Adverse weather conditions, e.g., rain or fog.
• A dirty or obscured sensor.
• A dirty, damaged, or misted windshield.
• Oncoming vehicles are partially obscured by a central highway barrier.
• An icy or frosted windshield.

Settings icon.¹

Exit icon.²