Make sure the following warnings have been read and fully understood before driving the vehicle. Failure to follow the guidelines could result in vehicle damage, serious injury, or death.
Dynamic Stability Control (DSC) helps maintain the vehicle’s stability in critical driving situations, e.g., during unstable driving conditions such as understeer and oversteer. If required, DSC controls the engine’s power output and applies the brakes at individual wheels.
DSC may also activate if wheel spin is detected, to help improve the vehicle’s acceleration performance.
DSC automatically enables when the vehicle’s ignition is switched on. DSC can be switched off via the touchscreen. See SWITCHING DYNAMIC STABILITY CONTROL (DSC) OFF.
DSC works in conjunction with the terrain response system. When operational, the terrain response system automatically adjusts DSC to suit the current driving program selection. See TERRAIN RESPONSE OPERATION.
The DSC lamp flashes in the instrument panel when DSC is active. See DYNAMIC STABILITY CONTROL (DSC) (YELLOW).
The DSC lamp illuminates permanently if the system develops a fault. Consult a retailer/authorized repairer if the fault persists.
To switch DSC off, first touch the vehicle controls icon on the touchscreen driver sidebar.
Select DRIVE.
To switch DSC off, touch the Dynamic Stability Control OFF soft key.
The touchscreen displays the DSC OFF icon to confirm DSC has been switched off. A tone also sounds.
The touchscreen displays the DSC OFF icon if Dynamic Stability Control (DSC) has been switched off.
Touch the DSC OFF icon to switch DSC on. The DSC OFF icon extinguishes to confirm that DSC has been switched on.
The active rear locking differential improves traction on uneven surfaces.
During the vehicle’s first 1 000 miles (1 600 km):
The All Wheel Drive (AWD) system enhances the vehicle’s traction and stability on uneven and slippery roads, and in adverse conditions.
The AWD system automatically varies the status between AWD and Rear Wheel Drive (RWD) to suit the current driving style and prevailing conditions. The status can be viewed via the 4x4i feature. See 4X4i OVERVIEW.
The instrument panel displays a message if a fault is detected with the AWD system. Reduced vehicle performance may also be experienced. In this event, the vehicle can still be driven, but with extra care. If the fault persists, contact a retailer/authorized repairer at the earliest opportunity.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…