FOLDING AND RAISING THE REAR SEATS FROM THE LOADSPACE
WARNING
Make sure that you have read and fully understood the relevant warnings before using any of the features in this section. See REAR SEAT SAFETY.
WARNING
Make sure that seat belts are correctly routed and not trapped when raising the rear seats. An incorrectly routed seat belt may not properly restrain an occupant during a collision or sudden stop.
CAUTION
Before folding the seats, make sure that all objects have been removed from the rear seats, and from the footwells. Failure to do so could potentially result in damage to the item or seat. The rear seats can be folded using a set of seat buttons located in the loadspace.
Pull (1) to fold the rear left seat.
Press (1) to raise the rear left seat.
Pull (2) to fold the rear right seat.
Press (2) to raise the rear right seat.
INTELLIGENT SEAT FOLD
WARNING
Beware of trapping fingers when raising, lowering, and moving the rear seats. Failure to do so creates a risk of entrapment and serious injury.
WARNING
Make sure that seat belts are correctly routed and not trapped when raising the rear seats. An incorrectly routed seat belt may not properly restrain an occupant during a collision or sudden stop.
WARNING
Make sure to keep any part of the body away from moving components. Failure to do so could potentially result in serious injury or death in the event of a sudden stop or collision.
CAUTION
Before folding the seats, make sure that all objects have been removed from the rear seats, and from the footwells. Failure to do so could potentially result in damage to the item or seat.
The intelligent seat fold feature allows the rear seats to be easily and conveniently configured in a number of different ways. The feature automatically calculates if any seats will clash, and takes appropriate action to make sure any fold or raise sequence is successful.
NOTES
If required, the Front Seat Clash Avoidance feature can be switched off via the SEAT SETTINGS screen.
The rear seats can be configured as follows:
- The rear seatbacks can be folded or raised using switches located in the load space.
- The rear seats can be folded or raised via the touchscreen.
NOTES
When Front Seat Clash Avoidance is on, the front seats move forward to avoid a clash. Use the front seat controls to return the front seats to their original positions. See ELECTRIC SEATS.
REMOTE SEATS
WARNING
Make sure to read and fully understand the relevant warnings before using any of the features in this section. See REAR SEAT SAFETY.
The touchscreen allows the user to remotely adjust the position of, or fold and raise, the passenger seats.
To adjust the position of a passenger’s seat using the touchscreen:
- On the APPS screen, select Seats.
The seat screen allows the user to fold or raise a passenger’s seat.
To fold all seats, touch the Fold all soft key.
To unfold all seats, touch the Unfold all soft key.
To fold a seat individually, touch the appropriate seat image on the touchscreen, then touch the Fold soft key to fold the seat.
The seat screen also presents a number of other features:
- Chauffeur Mode: Touch to open the CHAUFFEUR MODE screen. Chauffeur mode allows the driver to carry out the following functions via the touchscreen:
Adjust the front passenger seat to Seat Away or Reset positions.
Recall a front passenger’s seat memory setting.
NOTES
When a seat returns to the upright position, it should lock into place automatically. If lock mode is not detected, the seat will move forward three times and attempt to lock. Keep clear from the seat during this process. If the seat does not lock after the third attempt, it folds fully down into cargo mode. Check for any obstructions and attempt to fold again. If the seat does not return to the fully upright position after this procedure, contact a retailer/authorised repairer.
NOTES
If any items are greyed out on the touchscreen, an operation is inhibited. Refer to, and follow, the on-screen instructions.
RESTRICTED REAR SEAT TRAVEL
CAUTION
Check for and remove any obstructions should electric seat movement stop unexpectedly during folding or raising.
Once any obstructions have been removed, continue the seat movement by pressing the appropriate button.
NOTES
If no obstruction can be found, and seat movement cannot be carried out, contact a retailer/authorized repairer.