Mobile data requires a vehicle with a data-enabled embedded SIM card.
WI-FI ENABLED WITH DATA PLAN
WARNING
Make sure the relevant safety warnings and cautions for touchscreen operation have been read and understood before using the touchscreen. See TOUCHSCREEN SAFETY.
NOTES
The availability of Wi-Fi Enabled with the Data Plan depends on the market and the specification of the vehicle.
NOTES
The Wi-Fi Enabled with Data Plan feature uses a data-enabled embedded SIM card.
NOTES
Cellular connectivity cannot be guaranteed in all locations.
The Wi-Fi Enabled with Data Plan provides an in-vehicle hotspot and access to cellular internet, enabling wireless devices to be used in the vehicle. For details of the Fair Usage Policy associated with the Wi-Fi Enabled with Data Plan feature, please refer to the Land Rover website: www.landrover.com/pivi-pro-terms.
To enable the Wi-Fi Enabled with Data Plan feature:
- Touch the settings icon from any screen. See SYSTEM SETTINGS.
- Select Connectivity.
- Touch the Hotspot toggle to switch it on or off.
To display and edit the Hotspot settings:
- Touch the settings icon from any screen.
- Select Connectivity.
- Touch Hotspot.
The Hotspot menu displays the vehicle’s Wi-Fi hotspot name, password, and frequency. The Hotspot name is a computer generated by the vehicle and cannot be changed.
NOTES
To enter a new password, touch the chevron next to the displayed password. Land Rover password strength standards will apply.
To connect a device to the vehicle’s Hotspot, switch the device’s Wi-Fi to ON. Select the vehicle’s Hotspot name on the device. Insert the password.
NOTES
Some devices cannot receive 5GHz signals. To change the signal frequency between 2.4 and 5 GHz, use the selection buttons underneath the frequency header.
CONNECTIVITY STATUS ICONS
NOTES
Depending on the network connectivity, some features and services, including Wi-Fi, may not operate as expected, or at all. A strong 3G and 4G connection is required.
The following icons display the type of cellular and Wi-Fi connections:
Connecting.
E (edge) mobile network connectivity.
2G mobile network connectivity.
3G mobile network connectivity.
4G mobile network connectivity.
No mobile network connection.
Internet roaming.
When the vehicle is connected to an external hotspot, a Wi-Fi icon is displayed instead of a cellular icon.
The following icons display when software updates are available:
A software download is available.
To schedule a software download.
An important software download is required.
SOFTWARE UPDATES
NOTES
- In certain cases, the vehicle informs the user before an update and outlines any preconditions the user must follow to make sure vehicle operation follows the update. These can include requirements to drive the vehicle shortly after an update has been applied. The vehicle may support the download and installation of over-the-air software updates. Over-the-air software allows certain components of the vehicle to be kept up to date without the need to visit a retailer/authorized repairer. The ability to perform an update is simple and intuitive from within the vehicle’s infotainment system. When a new software update is available and depending on internet connectivity, the vehicle automatically begins the download process with no interruption to the vehicle usage. On completion of the download, a notification displays on the touchscreen asking to begin the installation process.
- Depending on the specification of the vehicle, software downloads may be requested to be done manually. Follow the on-screen prompt to start the installation process or schedule a preferred time. A preferred time can be set via the Vehicle and Software Updates menus on the touchscreen. See SYSTEM SETTINGS.
- During installation, the user can access the vehicle at any time, but it will not be possible to start the vehicle.
- Upon successful completion of the update, an on-screen notification is displayed. Following the update, the current software version information is visible within the vehicle’s infotainment system.
An update process can take up to an hour to complete.
To complete a software update observe the following conditions:
- The vehicle has to be locked and alarmed to start the installation process.
NOTES
Once the installation is initiated, the vehicle may still be accessed, however, it will not be possible to start the vehicle.
- The vehicle has to be parked and stationary.
- The new software must be successfully downloaded to the vehicle.
- The vehicle needs cellular or Wi-Fi connectivity during the process of performing a software update. See CONNECTIVITY OVERVIEW.
- The terms and conditions for the installation must be accepted.
- The vehicle update must not be interrupted, either by the vehicle owner or by loss of internet connectivity.
- The hazard warning lights, SOS emergency call, Optimized Land Rover Assistance call, or stolen vehicle locator must not be active.
- The vehicle may need to be associated with an active InControl account. See INCONTROL ACCOUNT SET UP.
NOTES
Availability of over-the-air updates may vary, depending on the market and vehicle specification. For further information go to:
www.landrover.com/pivi-pro-terms.