2023 Land Rover New Range Rover Sport Auto Stop/Start Owner Manual

2023 Land Rover New Range Rover Sport Auto Stop/Start

AUTO STOP/START

The auto stop/start system is designed to improve fuel efficiency. The system automatically activates when the vehicle’s ignition is switched on. Unless it is required to support other vehicle systems, the engine switches off when the vehicle is stationary, e.g., at traffic lights. When the engine stops, it is referred to as an auto stop.

When the Brake hold feature is not active and the brake pedal is released, or a drive gear is selected, the engine automatically restarts. When the engine restarts, it is referred to as an auto-start. See ANTI-LOCK BRAKING SYSTEM (ABS).

The operation of the auto stop/start system is indicated by a status icon in the instrument panel. See AUTO STOP/START (GREEN).

Under certain conditions, the auto stop/start system also switches off the engine while the vehicle is moving. See AUTO STOP ON THE MOVE.

TRIGGERING AN AUTO STOP

To trigger an auto stop, drive forward with Drive (D) or Sport (S) selected, and stop the vehicle. Fully press the brake pedal to make sure the vehicle is stationary.

The following conditions inhibit an auto stop:

• The external temperature is less than approximately 28°F (-2°C).
• The external temperature is more than approximately 104°F (40°C).
• The engine or other vehicle systems have not reached their optimum operating temperatures.
• The driver’s seat belt is unbuckled.
• Demand from the climate control system requires the engine to be running, e.g., when in defrost mode.
• The vehicle’s battery charge is low.
• The auto stop/start system is deactivated.
• After reversing, the vehicle’s speed has not exceeded 10 mph (16 km/h).
• A gearshift paddle has been used to select a gear.

The instrument panel displays an information lamp when the vehicle is stationary and the auto stop/start system is active, but operation is inhibited. See AUTO STOP/START INHIBIT (WHITE).

TRIGGERING AN AUTO-START

To trigger an auto start, release the brake pedal with Drive (D) or Sport (S) selected.

The engine also restarts if one of the following occurs:

• The auto stop/start system is deactivated.
• Reverse (R) gear is selected.
• Demand for the climate control system increased.
• The vehicle begins to move.
• The vehicle’s battery charge becomes low.
• The accelerator pedal is pressed.
• A gearshift paddle is used to select a gear.

AUTO STOP ON THE MOVE

Vehicles with a 48v system are equipped with an auto stop on the move feature. The auto stop on the move feature switches off the engine while the vehicle is moving if:

• The vehicle is traveling at less than approximately 1 mph (2 km/h), and:
• The brake pedal is pressed.

When the brake pedal is released, the engine automatically restarts.

The operation of the auto stop on the move feature is indicated by a status icon in the instrument panel. See AUTO STOP/START (GREEN).

The auto stop on the move feature is deactivated if auto stop/start is deactivated. See DEACTIVATING AUTO STOP/START.

DRIVER EXIT

When the vehicle is stationary, the driver exit feature prevents the vehicle from being inadvertently left in a driveable condition. If the feature detects that the driver is not present, it automatically switches off the vehicle’s ignition system. Once the vehicle’s ignition is switched off, the vehicle can be locked, if required. See SINGLE LOCKING.