Do not operate the touchscreen while the vehicle is moving. Doing so may cause driver distraction, leading to a loss of vehicle control. A loss of vehicle control could cause vehicle damage, serious injury, or death.
4x4i allows the user to view off-road information via the touchscreen or the instrument panel.
To view off-road information:
To view off-road information, touch the VEHICLE icon on the lower touchscreen.
Touch the 4x4i icon on the VEHICLE screen.
4x4i comprises the following features:
The 4X4i INFO screen displays the following information:
Do not exceed the vehicle’s limits and capabilities. Vehicle damage, serious injury, or death may result.
Touch the camera icon to display the off-road camera system on the touchscreen. See OFF-ROAD CAMERA VIEWS.
The parking aid sensors are disabled if Reverse (R) is selected.
The wheel spin arrows change size according to the amount of traction being lost:
The torque status icons progressively illuminate as torque is applied to each wheel.
Make sure the following warnings have been read and fully understood before wading. Failure to follow the guidance could result in vehicle damage, serious injury, or death.
Avoid driving in floodwater or any flowing water.
Wading should only be attempted if there are no alternative routes.
Do not assume that using the wade sensing feature makes wading any less dangerous. The wade sensing feature only detects the immediate level of water touching the vehicle. The wade sensing feature cannot detect or predict the depth of water surrounding the vehicle or rapid increases in water level. Hence, the wade sensing feature cannot predict if it is safe to continue driving. The driver is fully responsible for assessing the safety of the driving conditions, potential hazards, and the route through the water.
When entering the water from a steep slope, the water level may rise rapidly. The wade sensing feature may not be able to accurately warn the driver of the current water level.
The wade sensing feature cannot detect accurate water levels if a layer of ice or snow is present on the surface of the water.
The sensors for the wade sensing feature are located on the underside of the door mirrors. The sensors must be kept clean and clear of obstructions in order to operate correctly.
The wade sensing feature will display false readings if the door mirrors are in the folded position.
Make sure the relevant safety warnings have been read and understood before using the wade sensing feature. See WADE SENSING SAFETY.
The wade sensing feature disables the parking aid and auto stop/start systems.
The wade sensing feature cannot be enabled if the All Terrain Progress Control (ATPC) system is enabled.
Wade sensing operation is suspended if:
Wade sensing operation cancels if the vehicle’s speed exceeds 19 mph (30 km/h) for 30 seconds.
Prolonged wading may result in water ingress into the vehicle.
The TR INFO screen displays further information on the selected terrain response program. See TERRAIN RESPONSE OPERATION.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…