Make sure that vehicle recovery and/or transportation is carried out by suitably qualified personnel, and the vehicle is secured correctly. Recovery and/or transportation carried out by unqualified personnel can result in serious injury or death.
The recovery agent must activate the transmission park release before recovery commences. Transmission park release instructions are covered in a separate publication for recovery personnel use. Failure to activate the transmission park release can result in serious transmission damage.
The vehicle should not be towed on all four wheels and should not be recovered with the front or rear wheels suspended. Doing so can result in serious transmission damage. The method for recovery and/or transportation of the vehicle is on a transporter or trailer designed for that purpose.
The towing eye at the front of the vehicle is designed for on-road recovery only. If it is used for any other purpose, it may result in vehicle damage and serious injury.
Use extreme caution when moving or towing the vehicle. Death or serious injury may occur.
To access the towing eye:
Tighten or loosen the towing eye as required using the vehicle’s wheel brace. Pass the wheel brace through the towing eye and rotate to tighten/loosen as appropriate.
To refit the access cover, make sure the tether is correctly located. Align the lug into the recess in the bumper. Lightly press the top edge to engage the securing clip.
When fitting the panel, make sure the center tab (2) and top edge clips are engaged in the bumper slots.
The towing eye at the rear of the vehicle is designed for on-road recovery only. If they are used for any other purpose, they may result in vehicle damage and serious injury.
Use extreme caution when moving or towing the vehicle. Death or serious injury may occur.
Tighten or loosen the towing eye as required using the vehicle’s wheel brace. Pass the wheel brace through the towing eye and rotate to tighten/loosen as appropriate. To refit the access cover, make sure the tether is correctly located. Align the lug into the recess in the bumper. Lightly press the bottom edge to engage the securing clip.
Use extreme caution when detaching towing equipment. Vehicle movement is possible which can result in serious injury.
If the towing points are to be used for off-road recovery, it is essential that off-road driver training, covering recovery techniques is undertaken. Further information on off-road driver training can be found at: www.landroverexperience.com.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…