Make sure the tailpipe is cool before polishing the tailpipe finishers. Failure to do so may result in personal injury.
After cleaning the vehicle’s exterior, particularly with a pressure washer, the vehicle should be taken for a short drive to dry out the brakes.
To prevent damage to the vehicle when using a valeting service, make sure to advise them of the cleaning instructions contained within the Owner’s handbook.
Some high-pressure cleaning systems are sufficiently powerful enough to penetrate suspension joints, door/window seals, and damaged trim and door locks. Never aim the water jet directly at any cameras, the engine air intake, heater air intakes, body seals (doors, sunroof, windows, etc.), or at any components which may be damaged (lights, mirrors, exterior trim, suspension seals and gaiters, etc.). Make sure the pressure washer nozzle is always at a distance of more than 12 in (300 mm) from any component of the vehicle.
Do not use a power wash system in the engine bay area as it may cause damage.
Make sure you read and comply with all warnings and product instructions supplied with any cleaning products.
Never use cleaning products that are not approved for use on vehicles.
Substances that are corrosive, such as bird droppings, can damage the vehicle’s paintwork and should be removed as soon as possible.
When lifting the wiper blades for cleaning, use the Winter park position to avoid damage to the vehicle. See WINTER PARK POSITION. After washing the vehicle, it is recommended to use a suitable metal polish on stainless steel or chrome finishers to restore the surface appearance.
When washing the vehicle, do not aim high-pressure water jets directly at any of the sensors and cameras. High-pressure water jets may damage the sensors and cameras.
Do not use abrasive materials, or hard or sharp objects, to clean the sensors and cameras. Such objects may cause damage to the vehicle’s sensors and cameras.
Commercially operated, automatic car washes, jet washes, and power-operated mops are not recommended, especially with the door handles in the deployed position. Using such cleaning equipment can cause damage to the vehicle.
Regularly flush the underbody with plain, clean water, and pay particular attention to areas where mud and debris collect. If damage or corrosion is detected, have the vehicle checked by a Retailer/Authorized Repairer as soon as possible.
Do not use a high-pressure washer or steam cleaner in the engine compartment. Using unapproved cleaning equipment can cause damage to certain engine components.
Make sure that the brake fluid reservoir is kept dry at all times. Only use a clean, dry cloth to clean the brake fluid cap and reservoir. Using unapproved cleaning methods can cause damage to the vehicle.
Make sure the vehicle’s underside is cleaned as soon as possible after driving off-road.
Make sure the areas around the air intake and the front grille are clean and clear of debris. Pay particular attention to the lower grille and radiator. Failure to do so may cause the engine to overheat, leading to severe engine damage.
Only use appropriate wheel cleaning products for alloy wheels. Using inappropriate cleaning products or failing to follow the manufacturer’s application guidelines may cause damage to the component or the vehicle.
To avoid damaging the heating elements when cleaning the inside of the rear window, use only a soft, damp cloth or chamois leather. Do not use solvents or sharp objects to clean the glass.
Some cleaning products contain substances that are harmful and can cause health problems if used incorrectly.
Some cleaning products may cause damage to the vehicle’s interior. Make sure to read the cleaning product’s instructions carefully. If in any doubt as to which products to use, consult a retailer/authorized repairer.
Do not use chemical agents, solvents, or domestic cleaning products. Using unapproved cleaning products may damage the vehicle.
To prevent damage to the vehicle when using a detailing service, make sure to advise of the cleaning instructions contained within the Owner’s Handbook.
Unless spillages, such as tea, coffee, or ink, are washed away immediately, permanent staining may have to be accepted.
When cleaning, do not allow sharp or abrasive objects to make contact with the components. Sharp or abrasive objects may damage the components.
Use a soft, dry, lint-free cloth when cleaning switches or controls. Do not apply excessive pressure when doing so. Excessive pressure can damage vehicle components.
Do not spray liquids directly onto the surface of switches and controls. Fluids leaking into the gaps around switches and controls can damage the electronics of the vehicle.
Take care when cleaning high gloss surfaces as they are prone to scratching. It is recommended to use a clean microfiber cloth in small circular motions, making sure a fresh section of clean cloth is used regularly. To prevent ingrained dirt and staining, inspect the interior regularly and clean every 1 to 2 months. It is recommended to vacuum interior surfaces with a soft brush head attachment before using cleaning products.
Use a soft, dry, lint-free cloth when cleaning switches or controls. Do not apply excessive pressure when doing so. Excessive pressure could cause a component malfunction or even lead to a complete failure.
Do not spray liquids directly onto the surface of switches and controls. Liquids leaking into the gaps around switches and controls can damage the electronics of the vehicle.
Do not use chemical agents, solvents, or domestic cleaning products. Using unapproved cleaning products may damage the vehicle.
When cleaning, do not allow sharp or abrasive objects to make contact with the components. Sharp or abrasive objects may damage the components.
Never use soap, ammonia, bleach, or other cleaners intended for use on hard surfaces. Using unapproved cleaning products may damage the upholstery fabrics.
Do not use upholstery cleaner on electrical equipment such as dashboard switches. Doing so may damage the electrical equipment.
Some materials and fabrics are prone to dye transfer from colored clothing e.g., jeans, which can cause unsightly discoloration of lighter-colored materials and fabrics. Affected areas should be cleaned as soon as possible. Most stains on fabrics can be removed if treatment is carried out immediately before the stain has a chance to dry in. Specific products for use on interior fabrics are recommended for cleaning fabric upholstery, however, dry cleaning fluid or clean water can also be used.
To clean fabric upholstery:
Only use cleaning products specifically designed for use on leather. Do not use chemical, alcohol, or abrasive materials, as doing so will cause rapid deterioration of the leather. The use of non-approved products will invalidate the warranty.
If in any doubt as to which products to use, consult a retailer/authorized repairer. Using the wrong product can cause damage to the leather surfaces.
Dark clothing may stain leather seats, just like other upholstery products.
To clean leather upholstery:
Do not allow any water, cleaning products, or fabric from clothes to enter the seat belt mechanism. Any substance which enters the mechanism may affect the performance of the seat belt in an impact. Damage to the seat belt can greatly reduce its effectiveness in reducing the risk of serious injury or death in the event of an accident. Extend the seat belts fully. Specific products for use on interior fabrics are recommended, follow the product instructions. Alternatively, use warm water and a non-detergent soap to clean. Allow the seat belts to dry naturally while fully extended.
While cleaning the seat belt, take the opportunity to examine the webbing for damage/wear. Any wear or damage should be reported to, and rectified by a retailer/authorized repairer.
Airbag covers should be cleaned using only a slightly dampened cloth and a small amount of upholstery cleaner. Some cleaning products may cause damage to airbag covers and airbags which can lead to serious injury or death in the event of an accident.
Do not allow the airbag covers, or surrounding areas, to become contaminated with liquids. Any substance which enters the mechanism can prevent the correct deployment of an airbag during an impact and may cause serious injury or death.
WARNING
Correctly secure the floor mats before driving. Never placemats on top of each other. Unsecured or incorrectly positioned mats can obstruct the brake and/or accelerator pedal, which can result in accidents, potentially causing serious injury or death. Marks or stains can be removed by gentle scrubbing with a weak solution of soap and warm water. For more stubborn stains, a commercially available carpet cleaner should be used.
Only use cleaning products that are suitable for use on steering wheels and do not produce a slippery surface. A slippery surface could cause a loss of control of the vehicle, potentially resulting in serious injury or death.
Do not polish the Instrument panel. Polished surfaces are reflective, and may interfere with the driver’s view.
Do not use fluids on electrical equipment such as switches and screens. Fluids can leak into any gaps around the components or between panels or trim and cause damage to components.
Do not use upholstery cleaner on electrical equipment such as facia switches.
To avoid damage to the wiper blade, do not lift the wiper by the wiper blade. Always lift the wiper by the wiper arm. Not doing so may result in damage to the wiper blade.
Do not use excessive pressure. Excessive pressure on the wiper blades can damage the blades. Heavy contamination on the wiper blades should be removed, using a soft, damp sponge or cloth.
Do not operate the washer jets during unblocking or adjustment. Windshield washer fluid may cause irritation to the eyes and skin. Always read and observe the washer fluid manufacturer’s instructions. If a washer jet becomes blocked, use a thin strand of wire to unblock the jet, by inserting the wire into the jet. Make sure the wire is completely removed after unblocking.
Regularly inspect the paintwork for damage. Any stone chips, fractures, or deep scratches in the paint/bodywork should be repaired promptly. Bare metal corrodes quickly, and, if left untreated can result in expensive repairs.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…