2023 Land Rover Discovery Sport Exterior Lights Owners Manual

Contents hide

1 2023 Land Rover Discovery Sport Exterior Lights

2 EXTERIOR LIGHTS OVERVIEW

3 LIGHTING CONTROL

4 EXTERIOR LIGHTS CONDENSATION

5 DAYTIME RUNNING LIGHTS (DRL)

6 HEADLIGHT COURTESY DELAY

7 WINDSHIELD WIPER DETECTION

8 AUTO HIGH BEAM ASSIST (AHBA)

9 AUTO HIGH BEAM ASSIST (AHBA) LIMITATIONS

10 HEADLIGHT LEVELLING

2023 Land Rover Discovery Sport Exterior Lights

EXTERIOR LIGHTS OVERVIEW

The exterior lights operate automatically depending on the ambient lighting conditions.

A number of different features are available. The system automatically selects an appropriate feature, based on vehicle and ambient conditions. It may be necessary to manually override these features in some circumstances.

NOTES
Some manual operations may not be possible due to vehicle activity or legislative requirements.

LIGHTING CONTROL

The lighting control is located to the left of the steering wheel.

Move the lighting control in the appropriate direction to select the desired function. Once released, the lighting control returns to the neutral position.

Neutral position.
Side lights.
OFF.
Low beam headlights.
AUTO mode.
High beam headlights.
High beam headlights flash.
Rear fog lights.
Front fog lights.

NEUTRAL POSITION:

The lighting control returns to the neutral position after a manual lighting selection is made.

SIDE LIGHTS:

Rotate the lighting control to position (2) to switch the side lights on. The instrument panel warning lamp illuminates to confirm the selection. See SIDELIGHTS (GREEN).

OFF:

Rotate the lighting control to position (3) to manually switch off all exterior lights. The instrument panel extinguishes all related warning lamps.

LOW BEAM HEADLIGHTS:

Rotate the lighting control to position (4) to switch the low beam headlights on. The instrument panel warning lamp illuminates to confirm the selection. See LOW BEAM (GREEN).

AUTO MODE:

Rotate the lighting control to position (5) to select AUTO mode. When AUTO mode is selected, the following lighting features are enabled:

Daytime Running Lamps (DRL). See DAYTIME RUNNING LIGHTS (DRL) .
Headlight courtesy delay. See HEADLIGHT COURTESY DELAY.
Windshield wiper detection. See WINDSHIELD WIPER DETECTION.

AUTO mode is only active when the vehicle’s ignition is switched on and drive gear is selected.

The instrument panel warning lamp illuminates to confirm the selection. See AUTO LIGHTS (WHITE) .

NOTES
Low ambient light levels may also cause AUTO mode to activate.

HIGH BEAM HEADLIGHTS:

With the low beam headlights switched on, push the control forward (6) and release. The high beam headlights illuminate. The instrument panel warning lamp also illuminates to confirm the selection. See HIGH BEAM (BLUE).

Push the control forward a second time, and release, to switch the high beam headlights off. The instrument panel warning lamp extinguishes.

WARNING
Do not use the high beam headlights where they may distract other road users. Misuse of the high beam headlights could lead to an accident, potentially causing serious injury or death.

HIGH BEAM HEADLIGHTS FLASH:

Pull the lighting control back (7), and release, to flash the high beam headlights. The instrument panel warning lamp illuminates while the lighting control is held in the flash position.

REAR FOG LIGHTS:

Rotate the collar (8) towards the steering wheel, and release, to switch the rear fog lights on. The instrument panel warning lamp illuminates to confirm the selection. See REAR FOG LIGHTS (YELLOW).

Rotate the collar towards the steering wheel, and release, a second time to switch the rear fog lights off. The instrument panel warning lamp extinguishes.

NOTES
The rear fog lights only operate if the side lights or low beam headlights are switched on.

FRONT FOG LIGHTS:

Rotate the collar (9) away from the steering wheel, and release, to switch the front fog lights on. The instrument panel warning lamp illuminates to confirm the selection. See FRONT FOG LIGHTS (GREEN).

Rotate the collar away from the steering wheel, and release, a second time to switch the front fog lights off. The instrument panel warning lamp extinguishes.

NOTES
The front fog lights only operate if the side lights or low beam headlights are switched on.

NOTES

AUTO mode is switched off if the front fog lights are switched on.

EXTERIOR LIGHTS CONDENSATION

Condensation in the exterior lights is a natural phenomenon. Condensation can occur under certain atmospheric conditions, or after washing the vehicle. The performance and life expectancy of the lights is not affected.

Condensation should partially or fully clear with regular use of the lights, and within 48 hours of dry atmospheric conditions.

NOTES
LED lights emit less heat than halogen or xenon lights, and may take longer to clear. The performance of the lights is not affected.

DAYTIME RUNNING LIGHTS (DRL)

The Daytime Running Lamps (DRLs) illuminate during normal daylight conditions in order to make the vehicle more visible to other road users.

The DRLs illuminate automatically when the following conditions are met:

AUTO mode is active. See LIGHTING CONTROL.
High ambient light levels are detected.
The engine is running.
A drive gear is selected.

CANADA ONLY:

The rear position lights automatically illuminate when the DRLs illuminate.

HEADLIGHT COURTESY DELAY

The headlight courtesy delay feature illuminates the headlights for a period of time after the vehicle has been switched off.

Headlight courtesy delay operates when the following conditions are met:

AUTO mode is active. See LIGHTING CONTROL.
Low ambient light levels are detected.
The vehicle’s ignition is switched off.

The delay period can be adjusted via the touchscreen. To adjust the delay period:

Touch the settings icon.¹
Select ALL.
Select Vehicle.
Select Exterior lights.
Select Headlight delay.
Select a time delay option.
Touch the exit icon.²

Settings icon.¹

Exit icon.²

Press the headlight button on the smart key to switch the courtesy delay headlights off. See SMART KEY OPERATION.

WINDSHIELD WIPER DETECTION

The side lights, headlights, and tail lights automatically switch on if the following conditions exist:

AUTO mode is active. See LIGHTING CONTROL.
The windshield wipers are operational for 20 seconds or more.

The lights extinguish 2 minutes after the windshield wipers stop operating.

AUTO HIGH BEAM ASSIST (AHBA)

Auto High Beam Assist (AHBA) automatically selects and deselects the high beam headlights based on various light readings, including:

Ambient lighting.
Road lighting.
Lighting from oncoming vehicles.

WARNING
AHBA must not be relied on to react correctly in all circumstances. The driver remains responsible for the correct use of the headlights at all times. Incorrect use of the headlights could lead to an accident, potentially causing serious injury or death.

WARNING
AHBA uses sensors mounted on the rear of the rear-view mirror. Keep this area of the vehicle clean and free from obstructions, e.g. stickers, debris, mud, snow, or ice. Failure to do so may lead to sensor miscalculations, which could lead to an accident, potentially causing serious injury or death.

AHBA can be switched on and off via the touchscreen as follows:

Touch the settings icon.¹
Select ALL.
Select Vehicle.
Select Exterior lights.
Touch the Automatic high beam assist toggle to switch AHBA on or off.
Touch the exit icon.²

Settings icon.¹

Exit icon.²

The instrument panel displays a warning lamp to confirm that AHBA has been selected. See AUTO HIGH BEAM (BLUE).

AHBA can be manually overridden using the lighting control.

Push the lighting control forward, and release, to manually change from dipped beam to high beam headlights. The instrument panel extinguishes the AHBA warning lamp and illuminates the high beam headlights warning lamp. See HIGH BEAM (BLUE).

Pull the lighting control back, and release, to manually change from high beam to dipped beam headlights. The instrument panel extinguishes the AHBA warning lamp and illuminates the dipped beam headlights warning lamp. See LOW BEAM (GREEN).

To reactivate AHBA, push the lighting control forward, and release. The instrument panel extinguishes the high beam or dipped beam warning lamp and illuminates the AHBA warning lamp.

AUTO HIGH BEAM ASSIST (AHBA) LIMITATIONS

Auto High Beam Assist (AHBA) is only active when the vehicle is traveling at speeds in excess of 25 mph (40 km/h). AHBA deactivates when the vehicle’s speed drops below 15 mph (24 km/h).

The following may affect operation of AHBA:

Highly reflective road signs.
Poorly lit road users.
Adverse weather conditions, e.g. rain or fog.
A dirty or obscured sensor.
A dirty, damaged, or misted windscreen.
An icy or frosted windscreen.
Oncoming vehicles are partially obscured by a central barrier.

HEADLIGHT LEVELLING

NOTES
Headlight leveling is automatic on vehicles with Premium LED headlights. No manual adjustment is required.

Vehicles with LED headlights feature a rotary control on the fascia. Use the rotary control to adjust the alignment of the LED headlights as follows:

Loading condition	Switch position
Driver or driver and front passenger.	0
Driver and all passengers.	1
Driver and all passengers and luggage to the maximum weight.	2
Driver only and luggage to the maximum weight.	3