This is to protect the safety of those inside and outside the vehicle.
Briefly press the lock button on the smart key to lock the vehicle and arm the perimetric alarm. The hazard warning lights flash to confirm.
Single locking secures the vehicle and prevents the doors from being opened from the outside. The doors may still be unlocked and opened from inside the vehicle.
Once armed, the alarm activates if:
If uncertain about the vehicle’s locked and armed status, press the lock button on the smart key. With keyless entry, touch a lock button on an exterior door handle. The hazard warning lights flash once to indicate and confirm the current lock status. One short flash means that the vehicle is single locked.
To operate keyless locking:
When using keyless locking, the vehicle does not lock when:
No audible mislock error warning is given. The hazard warning lights do not flash and the power-fold mirrors, if enabled, do not fold in.
Make sure that the ignition is switched off, and that all of the doors, the hood and the tailgate are closed properly. Lock the vehicle again. If the mislock persists, consult a retailer/authorized repairer.
When the security system is armed, the battery back-up sounder activates if:
To operate the door locks and handles:
Pull either rear door handle once to unlock the individual rear door.
Door handle: Pull to unlock and open a door. If the door is locked, pull either front door handle once to unlock all of the doors.
When locking the vehicle with the smart key, a mislock can occur if:
If any of the above are present, the vehicle does not lock and an audible mislock error warning sounds. The hazard warning lights do not flash and the power-fold mirrors, if enabled, do not fold in. Check that all of the doors, the windows, the hood, and the tailgate are closed properly. Make sure the vehicle’s ignition is switched off. Lock the vehicle again. If the mislock persists, consult a retailer/authorized repairer.
If the alarm activates, it can be deactivated by any one of the following methods:
The cause of the last alarm activation can be displayed from the Vehicle menu on the touchscreen. See SYSTEM SETTINGS.
In the event of a fault with the alarm and/or locking system, manually secure the vehicle by locking all doors via the driver’s door key barrel.
The emergency key blade is required for this procedure. See SMART KEY OPERATION.
Using the emergency key:
If the issue persists, consult a retailer/authorized repairer for rectification as soon as possible.
In the event of the battery discharging, each of the doors must be locked manually.
The emergency key blade is required for this procedure. See SMART KEY OPERATION.
Using the emergency key:
Remove the emergency key blade.
Repeat the procedure for all other unlocked doors.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…