2022 Land Rover Discovery Sport Exterior Lights Owners Manual

2022 Land Rover Discovery Sport Exterior Lights

EXTERIOR LIGHTS OVERVIEW

The lighting system operates automatically depending upon the ambient lighting conditions. The system selects the appropriate lighting function, low beam or Daytime Running Light (DRL), for the conditions that the system detects. In some circumstances, it may be necessary for the vehicle user to manually override the automatic operation. Some manual operations are not possible due to vehicle activity or legislative requirements.

LIGHTING CONTROL

1. The neutral position of the lighting control: The lighting system operates automatically, dependent on the ambient level of light. During daylight, the Daytime Running Lights (DRL) automatically switch on. During night time the headlight switches on automatically. Rotate the lighting control to the required position and release, it to manually switch on any lighting functions. After being released, the lighting control returns to the neutral position.
2. Side lights: Rotate the lighting control to this position to switch the side lights on. The instrument panel warning lamp illuminates. See SIDELIGHTS (GREEN).
3. Headlights OFF: Rotate the lighting control to this position to switch the headlights off.
4. Headlights: Rotate the lighting control to this position to switch the headlights on.
5. AUTO: Rotate the lighting control to this position to select auto lights. Selecting AUTO causes the lighting system to operate according to ambient conditions. When ambient light fades and the ignition is switched on, the side lights, rear lights, low beam, and license plate lights switch on automatically. Headlight courtesy delay, Auto High Beam Assist (AHBA), and wiper detection may also be activated.
   NOTES

   Low exterior light levels, caused by adverse weather conditions, may also cause the auto lights to activate.

6. High beam: With the headlights on, push and release the lighting control to select the high beam. Push and release the lighting control again to deselect the high beam. The instrument panel warning lamp illuminates. See HIGH BEAM (BLUE).
   NOTES

   Do not use a high beam where it may distract other road users.

7. High beam flash: Pull the lighting control toward the steering wheel and release it to flash the high beam on and off. The high beam remains on for as long as the lighting control is held.
   NOTES

   Low exterior light levels, caused by adverse weather conditions, may also cause the auto lights to activate.

8. Front fog lights: Turn the lighting control away from the steering wheel, and release it to switch off the front fog lights. Turn the lighting control away from the steering wheel again, and release it to switch off the front fog lights. The instrument panel warning light illuminates. See FRONT FOG LIGHTS (GREEN).
9. Rear fog lights: Operate only while the headlights or front fog lights are selected. Turn the lighting control toward the steering wheel, and release to switch on the rear fog lights. Turn the lighting control toward the steering wheel again, and release it to switch off the rear fog lights. The instrument panel warning lamp illuminates. See REAR FOG LIGHTS (AMBER).

DAYTIME RUNNING LIGHTS (DRL)

While the exterior lighting conditions do not require the headlights to be on, Daytime Running Lights (DRL) operate automatically with the lighting control in the OFF or AUTO position. The DRL switch on automatically in the following conditions:

• The engine is running.
• The gear selector is out of Park (P).
• The Electric Parking Brake (EPB) is not applied (market dependent).

Unless required or prohibited by law, the DRL feature can be disabled or enabled by a retailer/authorized repairer.

HEADLIGHT COURTESY DELAY

Headlight courtesy delay operates whenever the lighting control is in the AUTO position, ambient light levels are low, and the vehicle’s ignition is switched off.

The time delay for illumination can be changed via the Exterior Lights settings.

To access the time options for headlight courtesy delay via the touchscreen:

1. Touch the settings icon¹ from any screen.
2. Touch the ALL soft key.
3. Touch the Vehicle’s soft key.
4. Touch the Exterior Lights soft key.
5. Touch the forward arrow in the box below Home lights to open the options menu.
6. Choose a time delay option.
7. Touch the exit icon² to return to the previously displayed screen.

Press the headlight button on the smart key to switch off courtesy lights at any time.

Settings icon.¹

Exit icon.²

AUTO HIGH BEAM ASSIST (AHBA)

The AHBA system automatically selects and deselects high beams, under specific conditions of road lighting and in the absence of other vehicle lights. The system is only active when the ambient light drops below a predetermined level. AHBA is enabled when the lighting control is in the AUTO position.

The driver can disable and re-enable the AHBA system at any time via the touchscreen:

1. Touch the settings icon¹ from any screen.
2. Touch the ALL soft key.
3. Touch Vehicle.
4. Touch Exterior Lights.
5. Automatic high beam assist: Toggle on or off. Toggle on to activate and view the available options.
6. Touch the exit icon², after selection, to return to the previously displayed screen.

The AHBA system only activates when the vehicle’s speed exceeds 25 mph (40 km/h). The system deactivates when the vehicle’s speed drops below 15 mph (24 km/h).

Push and release the lighting control to manually override to low beam from the high beam. Rotate the collar to AUTO to return to AHBA. The instrument panel warning lamp illuminates. See AUTO HIGH BEAM ASSIST (AHBA) (BLUE).

Push and release the lighting control to manually select the high beam. Rotate the lighting control to AUTO to return to AHBA.

The following may affect the operation of the AHBA system:

• Highly reflective road signs.
• Dimly lit road users, e.g., cyclists or pedestrians.
• Adverse weather conditions, e.g., rain or fog.
• A dirty or obscured sensor.
• A dirty, damaged, or misted windshield.
• Oncoming vehicles are partially obscured by a central highway barrier.
• An icy or frosted windshield.

Settings icon.¹

Exit icon.²

WINDSHIELD WIPER DETECTION

If AUTO lights are selected and the windshield wipers are switched on for 20 seconds or more. The side lights, tail lights, and headlights switch on automatically. When the wipers are switched off, the lights automatically switch off 2 minutes later.

EXTERIOR LIGHTS CONDENSATION

Condensation in the headlights, turn signals, or rear lights are a natural phenomenon. Condensation can occur under certain atmospheric conditions or after washing the vehicle. The performance and life expectancy of the lights are not affected. Condensation should partially or completely clear, with regular use of the lights, within 48 hours of dry atmospheric conditions. LED lights to distribute less heat towards the outer lens than halogen or xenon lights. In extreme conditions, LED lights may take longer to clear, but this is not detrimental to the performance of the light.