2022 Land Rover Discovery Sport Exiting The Vehicle
SINGLE LOCKING
Before exiting the vehicle, always make sure of the following: Park (P) gear is selected. The engine is switched off. The Electric Parking Brake (EPB) is applied. The smart key is removed from the vehicle. This is to protect the safety of those inside and outside the vehicle.
No modifications or additions should be made to the security system. Such changes could cause the system to malfunction.
Briefly press the lock button on the smart key to lock the vehicle and arm the perimetric alarm. The hazard warning lights flash to confirm.
Single locking secures the vehicle and prevents the doors from being opened from the outside. The doors may still be unlocked and opened from inside the vehicle.
Once armed, the alarm activates if:
- The hood, tailgate, or door is opened.
- The engine START/STOP button is pressed without a valid smart key present.
- The vehicle’s battery is disconnected.
- An attempt is made to disconnect the alarm’s siren.
- An attempt is made to disconnect the battery backup sounder.
Always secure the vehicle when left unattended.
LOCK CONFIRMATION
If uncertain about the vehicle’s locked and armed status, press the lock button on the smart key. With keyless entry, touch a lock button on an exterior door handle. The hazard warning lights flash once to indicate and confirm the current lock status. One short flash means that the vehicle is single-locked.
KEYLESS LOCKING
The smart key may not be detected if it is inside a metal container, or is shielded by a device with a back-lit LCD screen. For example, a smartphone, laptop, including when inside a laptop bag, or a games console. Keep the smart key clear of such devices when attempting keyless entry, keyless locking, or push button start.
Loose coins, in the same pocket as the smart key, can act as a shield and may affect its detection.
Keyless locking activates only if the smart key is detected outside the vehicle. If no smart key is present, locking does not occur.
The vehicle does not lock automatically.
To operate keyless locking:
- Lock sensor area: To lock the vehicle, only touch the lock sensor once, without grabbing the door handle. The hazard warning lights flash once to confirm locking.
Do not grip the door handle while touching the sensor. Doing so prevents the vehicle from locking.
When using keyless locking, the vehicle does not lock when:
- Any door(s) is open.
- The hood is open.
- The tailgate is not fully closed.
- The ignition is switched on.
No audible mis-lock error warning is given. The hazard warning lights do not flash and the power-fold mirrors, if enabled, do not fold in. Make sure that the ignition is switched off, and that all of the doors, the hood, and the tailgate are closed properly. Lock the vehicle again. If the lock persists, consult a retailer/authorized repairer.
BATTERY BACK-UP SOUNDER
When the security system is armed, the battery backup sounder activates if:
- The vehicle’s 12V battery is disconnected.
- An attempt is made to disconnect the alarm’s siren.
- An attempt is made to disconnect the battery backup sounder.
DOOR LOCKS AND HANDLES
While a door is open, the locking latch is exposed. If the latch has the soft-close feature, do not attempt to manually close the latch. It may automatically soft-close and trap items or body parts.
To operate the door locks and handles:
- Door handle: Pull to unlock and open a door. If the door is locked, pull either front door handle once to unlock all of the doors.
Pull either rear door handle once to unlock the individual rear door.
- Unlock button: Press to unlock all of the doors. Alternatively, pull either front door handle (1) once to unlock all of the doors.
- Lock button: With all of the doors closed, press to lock all of the doors.
Door handle: Pull to unlock and open a door. If the door is locked, pull either front door handle once to unlock all of the doors.
If the vehicle is locked with the smart key, operating an interior door handle unlocks only that door. If the door is opened, the alarm sounds.
The rear door child safety locks inhibit the operation of the rear door lock and unlock buttons and the door handles. See CHILD SAFETY LOCKS.
CLEAR EXIT MONITOR
A clear exit monitor is a useful aid only. The user is responsible for opening the door with due care and attention. Make sure the door is opened in a manner that is safe for the vehicle, its occupants, and other road users.
Make sure that the clear exit icons are not obscured by stickers or other objects. Obscured icons will impair the user’s ability to utilize the feature, which could cause damage to the vehicle.
Do not attach stickers or objects to the rear bumper that may interfere with the radar sensors. Blocked sensors could impair the operation of the clear exit monitor feature, which could cause damage to the vehicle. A clear exit monitor warns of another vehicle, or moving object, approaching from behind when the door has been unlatched from the inside. Sensors in the rear bumper monitor nearby traffic. If the system determines that opening the door could be unsafe due to passing traffic, a visible warning is given to the user.
A clear exit monitor is fitted to the rear doors only.
A clear exit monitor does not prevent the door from being opened.
The clear exit monitor becomes active when a rear door is unlatched, and the vehicle is stationary or traveling at less than 3 mph (5 km/h). The clear exit monitor remains active for 3 minutes after the vehicle’s ignition is switched off.
A white icon (1) illuminates to indicate that the system is active. An amber warning icon (2) illuminates to indicate that it could be unsafe to open the door due to passing traffic.
The icons extinguish after the door has been closed.
A clear exit monitor may not be able to detect all approaching traffic in all circumstances. The operation relies on the sensor’s ability to detect moving objects and may be affected by:
- Road conditions.
- Weather conditions.
- Vehicles approach very quickly from behind.
- The sensors becoming blocked by mud, rain, frost, ice, snow, accessories, or stickers.
- The sensors become damaged.
- The sensor’s line of sight becomes impaired by other objects, such as other vehicles parked extremely close, etc.
A loss of functionality or reduced warning times may be experienced if any of the above occur.
MATLOCK
When locking the vehicle with the smart key, a mislock can occur if:
- One or more of the doors, the hood, or the tailgate are not fully closed.
- One or more of the doors have failed to lock.
- The vehicle’s ignition is switched on.
If any of the above are present, the vehicle does not lock and an audible mislock error warning sounds. The hazard warning lights do not flash and the power-fold mirrors, if enabled, do not fold in. Check that all of the doors, the windows, the hood, and the tailgate are closed properly. Make sure the vehicle’s ignition is switched off. Lock the vehicle again. If the mislock persists, consult a retailer/authorized repairer.
Operating any door handle while attempting to unlock, lock, or change the child lock status may cause the security system to ignore any requests.
DEACTIVATING THE ALARM WHEN TRIGGERED
If the alarm activates, it can be deactivated by any one of the following methods:
- Press the unlock button on the smart key. See SMART KEY OPERATION.
- Open a door using keyless entry. See PASSIVE ENTRY.
- Press the START/STOP button with a valid smart key inside the vehicle. See STARTING THE ENGINE.
The cause of the last alarm activation can be displayed from the Vehicle menu on the touchscreen. See SYSTEM SETTINGS.
EMERGENCY LOCKING
Do not leave the emergency key blade in the vehicle at any point during the emergency locking procedure.
In the event of a fault with the alarm and/or locking system, manually secure the vehicle by locking all doors via the driver’s door key barrel.
The emergency key blade is required for this procedure. See SMART KEY OPERATION.
Using the emergency key:
- Make sure all apertures are closed and insert the emergency key blade into the driver’s door key barrel.
- Turn the emergency key blade 90° clockwise.
- All of the doors single lock and access to the luggage compartment is inhibited.
- Pull the exterior door handles to check that the doors are locked. When doing so, make sure any valid smart keys are at least 2 m away from the doors.
If the issue persists, consult a retailer/authorized repairer for rectification as soon as possible.
In the event of the battery discharging, each of the doors must be locked manually.
The emergency key blade is required for this procedure. See SMART KEY OPERATION.
Using the emergency key:
- Open a door and locate the emergency lock access cover on the edge of the door. The cover has an embossed lock icon. Insert the emergency key blade into the cover’s slot. Rotate the cover counter-clockwise to first release it, then pull it to remove it from the door. Keep the lock access cover safe.
- Insert the emergency key blade firmly into the emergency lock. A firm push activates the door’s locking mechanism.
Remove the emergency key blade.
- Refit the emergency lock access cover. Rotate it clockwise to secure it firmly.
- Close the door and check that it is locked.
Repeat the procedure for all other unlocked doors.