Make sure the following warnings have been read and fully understood before using a speed limiter. Failure to use the speed limiter safely could result in an accident, leading to serious injury or death.
Two types of speed limiter are available:
The speed limiter allows the driver to manually restrict the vehicle’s maximum speed. When a maximum speed limit is set, the vehicle responds normally until the set speed is reached. At this point, the vehicle stops accelerating.
The adaptive speed limiter works in conjunction with the traffic sign recognition system and the navigation system to restrict the vehicle’s maximum speed. The maximum speed is set based on the information received from both of these systems. If the system cannot determine a valid maximum speed, the last known set speed limit is used.
To activate the speed limiter, see SPEED LIMITER.
To activate the adaptive speed limiter, see ADAPTIVE SPEED LIMITER.
Press and hold the CAN button on the steering wheel to switch between the speed limiter and the adaptive speed limiter.
The speed limiter controls are located on the right side of the steering wheel:
Move the switch upward to select SET+.
Move the switch downward to select SET-.
Press the button to select RES.
Press the LIM button (3) on the steering wheel controls to toggle between speed limiter and cruise control. The instrument panel displays the information lamp for the selected system. See SPEED LIMITER (GREEN) and CRUISE CONTROL (GREEN).
The speed limiter does not operate until activated.
Move the speed control switch (1) upward to the SET+ position, and release, to activate the speed limiter. The vehicle’s speed is limited to the speed it was traveling at when the switch was moved. If the vehicle is stationary when the speed control switch is moved, the system sets the speed limit to 16 km/h (10 mph).
The LIM icon on the steering wheel controls illuminates to confirm that the system is operational.
Move the speed control switch upward to the SET+ position to increase the vehicle’s speed limit:
Move speed control switch (1) downward to the SET- position to reduce the vehicle’s speed limit.
Press the CAN button (2) to suspend speed limiter operation.
To reactivate the speed limiter:
The speed limiter’s set speed can be overridden if a higher level of acceleration is required. Fully press the accelerator pedal to accelerate past the speed limiter’s set speed. When the vehicle’s speed drops below the speed limiter’s set speed, any speed limitations are reapplied.
The driver may notice the effects of the speed limiter if the vehicle’s speed is close to the set speed limit.
The instrument panel displays messages to inform the driver of any performance or system issues.
The speed limiter controls are located on the right side of the steering wheel:
Move the switch upward to select SET+.
Move the switch downward to select SET-.
Press the button to select RES.
Press the LIM button (3) to toggle between adaptive speed limiter and cruise control. The instrument panel displays the information lamp for the selected system. See SPEED LIMITER (GREEN), ADAPTIVE SPEED LIMITER (GREEN), and CRUISE CONTROL (GREEN).
The LIM icon on the steering wheel controls illuminates to confirm that the system is operational.
If the speed limiter information lamp is displayed, press and hold the CAN button (2). The adaptive speed limiter information lamp replaces the speed limiter information lamp to confirm that the adaptive speed limiter has been selected.
The adaptive speed limiter does not operate until activated. Move the speed control switch (1) to the SET+ position and release, or press the RES button (1) to activate the adaptive speed limiter. The Head-Up Display (HUD) and instrument panel display the detected speed limits as icons.
If the system detects a speed limit lower than the current vehicle speed, it automatically slows the vehicle to meet the speed limit. Press the RES button switch to increase the rate of deceleration.
If the system detects a speed limit higher than the current vehicle speed, it allows the driver to accelerate up to the speed limit. Press the RES button to increase the rate of acceleration.
Press the CAN button to suspend the adaptive speed limiter operation.
Press the RES button, or move the speed control switch to the SET+ position and release, to resume adaptive speed limiter operation.
The adaptive speed limiter’s detected speed limit can be overridden if rapid acceleration is required. Fully press the accelerator pedal to accelerate past the adaptive speed limiter’s set speed. When the vehicle’s speed drops below the adaptive speed limiter’s detected speed limit, any speed limitations are reapplied.
The system’s detected speed limit can be adjusted, if required, to control the vehicle’s speed at just above or below the detected speed limit. The maximum adjustment is 10 km/h (5 mph) above or below the detected speed limit
Move the speed control switch upwards to the SET+ position to increase the vehicle’s speed limit:
Move speed control switches downward to the SET- position to reduce the vehicle’s speed limit.
The adaptive speed limiter:
The instrument panel displays messages to inform the driver of any performance or system issues.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…