Make sure the following warnings and cautions have been read and fully understood before driving the vehicle.
Failure to use the parking system safely could result in damage to the vehicle, or an accident, leading to serious injury or death.
The parking aid system works in conjunction with the camera system. The system assists the driver while manoeuvring the vehicle at low speed in confined spaces.
A 360° vehicle plan view displays detected objects along the front, rear, and sides of the vehicle, when active. Object tracking is also used along the sides of the vehicle to monitor the vehicle’s blind spots. If a detected object is calculated to be a collision threat, it is displayed as a coloured line over a black background. The distance from a collision threat is colour coded: yellow to amber to red, with red being the closest. Other detected objects that are not a collision threat are displayed as grey lines.
Any detected objects considered a collision threat will trigger repeating warning tones. The warning tones increase in intensity as the collision threat becomes closer. The warning tones become continuous when the object is within 200 mm of the vehicle. Warning tones sound from the area in which a collision threat has been detected.
While the vehicle is passing an object within its sensor range, the vehicle’s integrated systems calculate its steering trajectory. The touchscreen displays the trajectory lines on the 360° vehicle plan view and the camera main screen. The steering trajectory lines indicate the projected path of the vehicle, based on the current steering wheel position. See ON-ROAD CAMERA VIEWS.
The parking aid system activates automatically when icon¹ is displayed on the touchscreen’s passenger side bar. See PASSENGER SIDE BAR ICONS.
When a collision threat is detected, the touchscreen automatically displays a 360° vehicle plan view. A warning tone also sounds.
The parking aid system’s automatic parking aid alerts default state is on. To switch off automatic parking aid, complete the following steps:
To activate the parking aid system manually, touch the camera icon². See PASSENGER SIDE BAR ICONS.
Automatic parking aid icon.¹
Camera icon without automatic parking aid.²
To adjust the volume of the parking aid warning tones, rotate the media volume control while the tones are active. See AUDIO STEERING WHEEL CONTROLS.
Touch the speaker icon on the 360° vehicle plan view, to mute the warning tones for that manoeuvre only. See ON-ROAD CAMERA VIEWS.
The parking aid system is deactivated and cannot be reactivated if:
The parking aid system warning tones do not sound and the automatic parking aid is unavailable if:
If a parking aid system fault is detected, a red border displays on the 360° vehicle plan view. See ON-ROAD CAMERA VIEWS.
If all of the sensors are clean and the fault is not rectified after the vehicle’s electrical system is restarted, contact a retailer/authorised repairer.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…