2023 Land Rover DEFENDER MIRRORS
DOOR MIRRORS
Press the appropriate button to select the relevant door mirror to be adjusted. The button’s LED indicator lamp illuminates to confirm which side is active. Use the joystick control to adjust the mirror’s glass.
- Left door mirror adjustment.
- Right door mirror adjustment.
- Power-fold or unfold: Press both buttons simultaneously.
NOTES
The power-fold feature operates only if the vehicle’s speed is below 113 km/h (70 mph). Power-folding is a vehicle specific feature.
An amount of knock protection is designed into the door mirrors. If a mirror is accidentally knocked or manually folded inwards or outwards, the mirror head disengages from the folding mechanism. To re-engage the mechanism, manually return the mirror to its central position, then fold and unfold the door mirror using the button.
The door mirror heaters operate automatically, according to the external temperature and the heated rear screen operation.
Depending on the type of lens used, distances may be difficult to judge accurately when only using mirrors.
The door mirrors can be adjusted for up to 5 minutes after the ignition is switched off, provided the driver’s door is not opened.
If the door mirrors are folded when the vehicle is locked, the mirrors do not unfold when the vehicle is unlocked. Garage mode prevents the mirrors from being damaged when unfolding, e.g., in a tight garage spot. If the mirrors remain folded, they automatically unfold when the vehicle exceeds 40 km/h (25 mph).
MIRROR DIP WHEN REVERSING
Mirror dip can be enabled or disabled via the Vehicle settings menu.
To access the Mirror Dip on Reverse settings:
- Touch the settings icon¹ from any screen.
- Touch the ALL soft key.
- Touch Vehicle.
- Touch Convenience.
- Touch Mirrors.
- Mirror Dip on Reverse: Toggle on or off.
- Touch the exit icon², after selection, to return to the previously displayed screen.
Selecting Reverse (R) causes the door mirrors to automatically adjust, providing an improved viewing angle for reversing.
The dipped position of the door mirrors is a preset position. In R, the door mirrors can be adjusted and the new position can be saved.
The new door mirror dip position can only be saved in R.
With R selected, press the memory save button (M). Select either memory 1, 2, or 3 to save the reverse mirror dip position to the corresponding memory. See SEAT POSITION MEMORY.
Three different reverse mirror dip positions can be saved. Use the memory recall feature to recall the saved positions.
When the gear selector is moved out of R, the door mirrors return to the previous position.
Settings icon.¹
Exit icon.²
CLEARSIGHT REAR-VIEW MIRROR
The ClearSight rear-view mirror has a limited view. The driver is responsible for detecting obstacles and estimating the vehicle’s distance from them when manoeuvring the vehicle. Driver distraction can lead to accidents, potentially causing serious injury or death.
When cleaning the ClearSight rear-view mirror glass, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as that may cause the liquid cleaner to enter the mirror housing and damage the mirror.
The image quality displayed on the ClearSight rear-view mirror can be affected by external light sources and artefacts on the rear-facing camera lens, such as dirt, water droplets, insects etc. Make sure the rear-facing camera lens is clean. See SENSORS AND CAMERAS. A ClearSight rear-view mirror uses a camera and a mirror-integrated display. The ClearSight rear-view mirror camera mode displays a wide-angle camera view of the area behind the vehicle. Alternatively, use the ClearSight rear-view mirror as a conventional mirror.
- HomeLink® buttons. See RADIO FREQUENCY (RF) TRANSCEIVER.
- ClearSight rear-view mirror mode switch.
- ClearSight rear-view mirror settings button.
- ClearSight rear-view mirror settings adjuster button – Down.
- ClearSight rear-view mirror settings adjuster button – Up.
To enable the ClearSight rear-view mirror camera mode, pull the ClearSight rear-view mirror mode switch (2) rearward.
Push the mode switch (2) forward to disable.
The user can adjust the following ClearSight rear-view mirror settings:
- Brightness: Press the settings button (3). Adjust the brightness levels using the up (5) and down (4) buttons.
- Height: Press the settings button twice. Adjust the height using the up (5) and down (4) buttons.
If a ClearSight rear-view mirror system fault is detected, the rear-view mirror displays a camera disabled icon.¹ If the camera display is not available, place the ClearSight rear-view mirror into mirror mode, and contact a retailer/authorized repairer.
HomeLink® is a registered trademark of Gentex Corporation.
Camera disabled icon.¹
AUTO-DIMMING INTERIOR REARVIEW MIRROR
The operation of the center sun visor may affect the operation of the auto-dimming interior rearview mirror.